Hello Soren,
On Mon, 30 Jun 2014 09:56:33 -0700
Soren Brinkmann <soren.brinkm...@xilinx.com> wrote:
> Introduce a new API function to find the rate a clock can provide
> which is closest to a given rate.
>
> clk_round_rate() leaves it to the clock driver how rounding is done.
> Commonly implementations round down due to use-cases that have a
> certain frequency maximum that must not be exceeded.
I had the same concern (how could a driver decide whether it should
round up, down or to the closest value), but had a slightly different
approach in mind.
AFAIU, you're assuming the clock is always a power of two (which is
true most of the time, but some clock implementation might differ,
i.e. a PLL accept any kind of multiplier not necessarily a power of 2).
How about improving the clk_ops interface instead by adding a new method
long (*round_rate_with_constraint)(struct clk_hw *hw,
unsigned long requested_rate,
unsigned long *parent_rate,
enum clk_round_type type);
with
enum clk_round_type {
CLK_ROUND_DOWN,
CLK_ROUND_UP,
CLK_ROUND_CLOSEST,
};
or just adding these 3 methods:
long (*round_rate_up)(struct clk_hw *hw,
unsigned long requested_rate,
unsigned long *parent_rate);
long (*round_rate_down)(struct clk_hw *hw,
unsigned long requested_rate,
unsigned long *parent_rate);
long (*round_rate_closest)(struct clk_hw *hw,
unsigned long requested_rate,
unsigned long *parent_rate);
and let the round_rate method implement the default behaviour.
This way you could add 3 functions to the API:
clk_round_closest (or clk_find_nearest_rate as you called it),
clk_round_up and clk_round_down, and let the clk driver implementation
return the appropriate rate.
These are just some thoughts...
Best Regards,
Boris
>
> The new API call enables use-cases where accuracy is preferred. E.g.
> Ethernet clocks.
>
> Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com>
> ---
>
> drivers/clk/clk.c | 57
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/clk.h | 9 +++++++++ 2 files changed, 66 insertions(+)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 8b73edef151d..fce1165cd879 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1030,6 +1030,63 @@ long clk_round_rate(struct clk *clk, unsigned
> long rate) EXPORT_SYMBOL_GPL(clk_round_rate);
>
> /**
> + * clk_find_nearest_rate - round the given rate for a clk
> + * @clk: the clk for which we are rounding a rate
> + * @rate: the rate which is to be rounded
> + *
> + * Takes in a rate as input and finds the closest rate that the clk
> + * can actually use which is then returned.
> + * Note: This function relies on the clock's clk_round_rate()
> implementation.
> + * For cases clk_round_rate() rounds up, not the closest but the
> rounded up
> + * rate is found.
> + */
> +long clk_find_nearest_rate(struct clk *clk, unsigned long rate)
> +{
> + long ret, lower, upper;
> + unsigned long tmp;
> +
> + clk_prepare_lock();
> +
> + lower = __clk_round_rate(clk, rate);
> + if (lower >= rate || lower < 0) {
> + ret = lower;
> + goto unlock;
> + }
> +
> + tmp = rate + (rate - lower) - 1;
> + if (tmp > LONG_MAX)
> + upper = LONG_MAX;
> + else
> + upper = tmp;
> +
> + upper = __clk_round_rate(clk, upper);
> + if (upper <= lower || upper < 0) {
> + ret = lower;
> + goto unlock;
> + }
> +
> + lower = rate + 1;
> + while (lower < upper) {
> + long rounded, mid;
> +
> + mid = lower + ((upper - lower) >> 1);
> + rounded = __clk_round_rate(clk, mid);
> + if (rounded < lower)
> + lower = mid + 1;
> + else
> + upper = rounded;
> + }
> +
> + ret = upper;
> +
> +unlock:
> + clk_prepare_unlock();
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(clk_find_nearest_rate);
> +
> +/**
> * __clk_notify - call clk notifier chain
> * @clk: struct clk * that is changing rate
> * @msg: clk notifier type (see include/linux/clk.h)
> diff --git a/include/linux/clk.h b/include/linux/clk.h
> index fb5e097d8f72..f8b53c515483 100644
> --- a/include/linux/clk.h
> +++ b/include/linux/clk.h
> @@ -264,6 +264,15 @@ void devm_clk_put(struct device *dev, struct clk
> *clk); long clk_round_rate(struct clk *clk, unsigned long rate);
>
> /**
> + * clk_find_nearest_rate - Find nearest rate to the exact rate a
> clock can provide
> + * @clk: the clk for which we are rounding a rate
> + * @rate: the rate which is to be rounded
> + *
> + * Returns the rate closest to @rate the clock can provide.
> + */
> +long clk_find_nearest_rate(struct clk *clk, unsigned long rate);
> +
> +/**
> * clk_set_rate - set the clock rate for a clock source
> * @clk: clock source
> * @rate: desired clock rate in Hz
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
