Hello, This patch adds an initial device tree for the Parallella board. UART, SD card, Ethernet are enabled. Not yet enabled are HDMI (FPGA, ADV7513), QSPI and 2x USB.
Where I'm a bit unsure is the PHY placement; placement as subnode of the GEM corresponds to what was in the downstream 3.12 based device tree. It is a separate chip on the board though, whereas GEM is on the SoC. Regards, Andreas Andreas Färber (1): ARM: dts: zynq: Add Parallella device tree arch/arm/boot/dts/Makefile | 4 ++- arch/arm/boot/dts/zynq-parallella.dts | 63 +++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/zynq-parallella.dts -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
