On Fri, 2005-03-04 at 11:54 -0500, Dmitry Torokhov wrote: > On Fri, 04 Mar 2005 17:20:24 +0100, Hans-Christian Egtvedt <[EMAIL > PROTECTED]> wrote: > > On Fri, 2005-03-04 at 09:52 -0500, Dmitry Torokhov wrote: > > > On Fri, 4 Mar 2005 14:03:37 +0200, Alexey Dobriyan <[EMAIL PROTECTED]> > > > wrote: > > > > On Friday 04 March 2005 12:30, Hans-Christian Egtvedt wrote: > > > As far as the driver goes: > > > > > > - yes, it does need input_sync; > > > > One problem with input_sync is that the panel get's too fast, and double > > click is experienced quite often, maybe some threshold is needed for low > > values in Z-direction? > > > > I'm probably doing something wrong here since I experience easy > > doubleclicks when I just lightly touch the screen. > > Yes, I think you need to use some threshold when reporting BTN_TOUCH > event. Still, always report ABS_PRESSURE as is. This way the > touchscreen is useable via legacy interfaces (mousedev. tsdev) and if > a specialized userspace driver is written it still can get pretty much > unmangled data from /dev/input/eventX. This will also allow such > driver adjust touchpad sensitivity, if needed.
Do you have any pointers to where I should go to implement this threshold? Is there an easy or smart way doing it? <snip query about screen siz > No, not physical sizes. I was wondering if soe touchscreens are > reporting let's say actual coordinates from 1100-3600 and others from > 600-3850, instead of full 0-4096. Is there a way to query the hardware > and find the actual min and max for a device so it can be reported to > userspace. I really don't think the controller can now anything about the size of the screen. I've attached version 1.2.1 of the driver, fixed some typo, code cleanup and discovered I used depricated functions so I moved to the new correct way of doing killing of the urb. Starting looking into ways of using the module directly as a standard mouse, that will take away loads of worries for me about converting X applications to x.org. Any tips are welcome. Is this done before with a touchscreen? -- Hans-Christian Egtvedt <[EMAIL PROTECTED]> MIVU Solutions DA
--- kernel-source-2.6.11/drivers/usb/input/Kconfig 2004-12-24 22:35:23.000000000 +0100
+++ linux-2.6.11/drivers/usb/input/Kconfig 2005-03-02 10:58:41.000000000 +0100
@@ -190,6 +190,18 @@
To compile this driver as a module, choose M here: the
module will be called mtouchusb.
+config USB_ITMTOUCH
+ tristate "ITM Touch USB Touchscreen Driver"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use a ITM Touch USB
+ Touchscreen controller.
+
+ This touchscreen is used in LG 1510SF monitors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called itmtouch.
+
config USB_EGALAX
tristate "eGalax TouchKit USB Touchscreen Driver"
depends on USB && INPUT
--- kernel-source-2.6.11/drivers/usb/input/Makefile 2004-12-24 22:35:00.000000000 +0100
+++ linux-2.6.11/drivers/usb/input/Makefile 2005-03-02 10:57:11.000000000 +0100
@@ -33,6 +33,7 @@
obj-$(CONFIG_USB_KBTAB) += kbtab.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o
+obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o
obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
--- /dev/null 2005-03-01 19:15:30.000000000 +0100
+++ linux-2.6.11/drivers/usb/input/itmtouch.c 2005-03-02 11:05:04.000000000 +0100
@@ -0,0 +1,318 @@
+/******************************************************************************
+ * itmtouch.c -- Driver for ITM touchscreen panel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon original work by Chris Collins <[EMAIL PROTECTED]>.
+ *
+ * History
+ * 1.0 & 1.1 2003 (CC) [EMAIL PROTECTED]
+ * Original version for 2.4.x kernels
+ *
+ * 1.2 02/03/2005 (HCE) [EMAIL PROTECTED]
+ * Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
+ * Unfortunately no calibration support at this time.
+ *
+ * 1.2.1 09/03/2005 (HCE) [EMAIL PROTECTED]
+ * Code cleanup and adjusting syntax to start matching kernel standards
+ *
+ *****************************************************************************/
+
+/* In order to prevent poluting device space with YET ANOTHER character
+ * device, this driver pumps out raw coordinate events into the input
+ * event stream.
+ *
+ * They can be extracted using the input core raw events module.
+ *
+ * Kudos to ITM for providing me with the datasheet for the panel,
+ * even though it was a day later than I had finished writing this
+ * driver.
+ *
+ * It has meant that I've been able to correct my interpretation of the
+ * protocol packets however.
+ *
+ * CC -- 2003/9/29
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_USB_DEBUG
+ #define DEBUG
+#else
+ #undef DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+
+/* only an 8 byte buffer necessary for a single packet */
+#define ITM_BUFSIZE 8
+/* support a maximum of 4 such touchscreens at once */
+#define MAXTOUCH 4
+#define UCP(x) ((unsigned char*)(x))
+#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))
+#define PATH_SIZE 64
+
+#define USB_VENDOR_ID_ITMINC 0x0403
+#define USB_PRODUCT_ID_TOUCHPANEL 0xf9e9
+
+#define DRIVER_AUTHOR "Hans-Christian Egtvedt <[EMAIL PROTECTED]>"
+#define DRIVER_VERSION "v1.2.1"
+#define DRIVER_DESC "USB ITM Inc Touch Panel Driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE( DRIVER_LICENSE );
+
+struct itmtouch_dev {
+ struct usb_device *usbdev; /* usb device */
+ struct input_dev inputdev; /* input device */
+ struct urb *readurb; /* urb */
+ char rbuf[ITM_BUFSIZE]; /* data */
+ int users;
+ char name[128];
+ char phys[64];
+};
+
+static struct usb_device_id itmtouch_ids [] = {
+ { USB_DEVICE(USB_VENDOR_ID_ITMINC, USB_PRODUCT_ID_TOUCHPANEL) },
+ { }
+};
+
+static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct itmtouch_dev * itmtouch = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ETIMEDOUT:
+ /* this urb is timing out */
+ dbg("%s - urb timed out - was the device unplugged?",
+ __FUNCTION__);
+ return;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ input_regs(&itmtouch->inputdev, regs);
+
+ /* if pressure has been released, then don't report X/Y */
+ if (!UCOM(urb, 7, 0x20)) {
+ input_report_abs(&itmtouch->inputdev, ABS_X,
+ UCOM(urb, 0, 0x1F) << 7 | UCOM(urb, 3, 0x7F));
+ input_report_abs(&itmtouch->inputdev, ABS_Y,
+ UCOM(urb, 1, 0x1F) << 7 | UCOM(urb, 4, 0x7F));
+ }
+
+ input_report_abs(&itmtouch->inputdev, ABS_PRESSURE,
+ UCOM(urb, 2, 0x1) << 7 | UCOM(urb, 5, 0x7F));
+ input_report_key(&itmtouch->inputdev, BTN_TOUCH, !UCOM(urb, 7, 0x20));
+ /* TODO: Do we need to use input_sync() ? */
+ /* input_sync(&itmtouch->inputdev); */
+
+exit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ printk(KERN_ERR "%s - usb_submit_urb failed with result: %d",
+ __FUNCTION__, retval);
+}
+
+static int itmtouch_open(struct input_dev *input)
+{
+ struct itmtouch_dev *itmtouch = input->private;
+
+ if (itmtouch->users++)
+ return 0;
+
+ itmtouch->readurb->dev = itmtouch->usbdev;
+
+ if (usb_submit_urb (itmtouch->readurb, GFP_KERNEL))
+ {
+ itmtouch->users--;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void itmtouch_close(struct input_dev *input)
+{
+ struct itmtouch_dev *itmtouch = input->private;
+
+ if (!--itmtouch->users)
+ usb_kill_urb (itmtouch->readurb);
+}
+
+static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct itmtouch_dev *itmtouch;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_device * udev = interface_to_usbdev(intf);
+ unsigned int pipe;
+ unsigned int maxp;
+ char path[PATH_SIZE];
+
+ dbg("%s - called", __FUNCTION__);
+
+ dbg("%s - setting interface", __FUNCTION__);
+ interface = intf->cur_altsetting;
+
+ dbg("%s - setting endpoint", __FUNCTION__);
+ endpoint = &interface->endpoint[0].desc;
+
+ if (id->idVendor != USB_VENDOR_ID_ITMINC || id->idProduct != USB_PRODUCT_ID_TOUCHPANEL) {
+ printk(KERN_WARNING "itmtouch: tried to bind to non-ts device.\n");
+ return -ENODEV;
+ }
+
+ /* allocate memory space */
+ if (!(itmtouch = kmalloc (sizeof (struct itmtouch_dev), GFP_KERNEL))) {
+ err("%s - Out of memory.", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(itmtouch, 0, sizeof(struct itmtouch_dev));
+
+ /* fill in the USB device info */
+ itmtouch->usbdev = udev;
+
+ itmtouch->inputdev.private = itmtouch;
+ itmtouch->inputdev.open = itmtouch_open;
+ itmtouch->inputdev.close = itmtouch_close;
+
+ usb_make_path(udev, path, PATH_SIZE);
+
+ /* set up the input queue */
+ itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+ itmtouch->inputdev.name = itmtouch->name;
+ itmtouch->inputdev.phys = itmtouch->phys;
+ itmtouch->inputdev.id.bustype = BUS_USB;
+ itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
+ itmtouch->inputdev.id.product = udev->descriptor.idProduct;
+ itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+ itmtouch->inputdev.dev = &intf->dev;
+
+ if (!strlen(itmtouch->name))
+ sprintf(itmtouch->name, "USB ITM touchscreen");
+
+ /* device limits */
+ /* as specified by the ITM datasheet, X and Y are 12bit,
+ * Z (pressure) is 8 bit. However, the fields are defined up
+ * to 14 bits for future possible expansion.
+ */
+ input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0);
+
+ /* initialise the URB so we can read from the transport stream */
+ pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
+
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+ if (maxp > ITM_BUFSIZE) {
+ printk(KERN_WARNING "itmtouch: WARNING: packet size > ITM_BUFSIZE\n");
+ maxp = ITM_BUFSIZE;
+ }
+
+ itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
+
+ if (!itmtouch->readurb) {
+ dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
+ kfree(itmtouch);
+ return -ENOMEM;
+ }
+
+ dbg("%s - usb_fill_int_urb", __FUNCTION__);
+ usb_fill_int_urb(itmtouch->readurb,
+ itmtouch->usbdev,
+ pipe,
+ itmtouch->rbuf,
+ maxp,
+ itmtouch_irq,
+ itmtouch,
+ endpoint->bInterval);
+
+ /* register the device with the input system */
+ dbg("%s - input_register_device", __FUNCTION__);
+ input_register_device(&itmtouch->inputdev);
+
+ printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
+ usb_set_intfdata(intf, itmtouch);
+
+ return 0;
+}
+
+static void itmtouch_disconnect(struct usb_interface *intf)
+{
+ struct itmtouch_dev *itmtouch = usb_get_intfdata (intf);
+
+ dbg("%s - called", __FUNCTION__);
+
+ usb_set_intfdata(intf, NULL);
+ if (itmtouch) {
+ dbg("%s - itmtouch is initialized, cleaning up", __FUNCTION__);
+ input_unregister_device(&itmtouch->inputdev);
+ usb_kill_urb(itmtouch->readurb);
+ usb_free_urb(itmtouch->readurb);
+ kfree(itmtouch);
+ }
+}
+
+MODULE_DEVICE_TABLE(usb, itmtouch_ids);
+
+static struct usb_driver itmtouch_driver = {
+ .owner = THIS_MODULE,
+ .name = "itmtouch",
+ .probe = itmtouch_probe,
+ .disconnect = itmtouch_disconnect,
+ .id_table = itmtouch_ids,
+};
+
+static int __init itmtouch_init(void)
+{
+ dbg("%s - called", __FUNCTION__);
+ info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_AUTHOR);
+ return usb_register(&itmtouch_driver);
+}
+
+static void __exit itmtouch_exit(void)
+{
+ dbg("%s - called", __FUNCTION__);
+ usb_deregister(&itmtouch_driver);
+}
+
+module_init(itmtouch_init);
+module_exit(itmtouch_exit);
signature.asc
Description: This is a digitally signed message part
