The vbus regulator was not getting its name set. This results
in the sysfs entry being empty. The lack of a bcm590xx_regs[]
table entry also upsets Coverity runs. Add the table entry
so the name gets set properly.
Signed-off-by: Graham Williams <graham.willi...@linaro.org>
---
drivers/regulator/bcm590xx-regulator.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/regulator/bcm590xx-regulator.c
b/drivers/regulator/bcm590xx-regulator.c
index 57544e2..58ece59 100644
--- a/drivers/regulator/bcm590xx-regulator.c
+++ b/drivers/regulator/bcm590xx-regulator.c
@@ -119,6 +119,10 @@ static const unsigned int ldo_c_table[] = {
2900000, 3000000, 3300000,
};
+static const unsigned int ldo_vbus[] = {
+ 5000000,
+};
+
/* DCDC group CSR: supported voltages in microvolts */
static const struct regulator_linear_range dcdc_csr_ranges[] = {
REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
@@ -192,6 +196,7 @@ static struct bcm590xx_info bcm590xx_regs[] = {
BCM590XX_REG_TABLE(gpldo4, ldo_a_table),
BCM590XX_REG_TABLE(gpldo5, ldo_a_table),
BCM590XX_REG_TABLE(gpldo6, ldo_a_table),
+ BCM590XX_REG_TABLE(vbus, ldo_vbus),
};
struct bcm590xx_reg {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
