separate the mrf24j40 hardware initialisation from probe()
and adds the sanity checkings.
These checkings are required if somebody hasn't a right spi configuration
the probe function should fail. So we have to return from there.
Signed-off-by: Varka Bhadram <var...@cdac.in>
---
drivers/net/ieee802154/mrf24j40.c | 115 ++++++++++++++++++++++++++++---------
1 file changed, 89 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ieee802154/mrf24j40.c
b/drivers/net/ieee802154/mrf24j40.c
index 4048062..9e6a124 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -610,10 +610,95 @@ out:
return IRQ_HANDLED;
}
+static int mrf24j40_hw_init(struct mrf24j40 *devrec)
+{
+ int ret;
+ u8 val;
+
+ /* Initialize the device.
+ From datasheet section 3.2: Initialization. */
+ ret = write_short_reg(devrec, REG_SOFTRST, 0x07);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_PACON2, 0x98);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_TXSTBL, 0x95);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_RFCON0, 0x03);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_RFCON1, 0x01);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_RFCON2, 0x80);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_RFCON6, 0x90);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_RFCON7, 0x80);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_RFCON8, 0x10);
+ if (ret)
+ goto err_ret;
+
+ ret = write_long_reg(devrec, REG_SLPCON1, 0x21);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_BBREG2, 0x80);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_CCAEDTH, 0x60);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_BBREG6, 0x40);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_RFCTL, 0x04);
+ if (ret)
+ goto err_ret;
+
+ ret = write_short_reg(devrec, REG_RFCTL, 0x0);
+ if (ret)
+ goto err_ret;
+
+ udelay(192);
+
+ /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
+ ret = read_short_reg(devrec, REG_RXMCR, &val);
+ if (ret)
+ goto err_ret;
+
+ val &= ~0x3; /* Clear RX mode (normal) */
+
+ ret = write_short_reg(devrec, REG_RXMCR, val);
+ if (ret)
+ goto err_ret;
+
+ return 0;
+
+err_ret:
+ return ret;
+}
+
static int mrf24j40_probe(struct spi_device *spi)
{
int ret = -ENOMEM;
- u8 val;
struct mrf24j40 *devrec;
printk(KERN_INFO "mrf24j40: probe(). IRQ: %d\n", spi->irq);
@@ -650,31 +735,9 @@ static int mrf24j40_probe(struct spi_device *spi)
if (ret)
goto err_register_device;
- /* Initialize the device.
- From datasheet section 3.2: Initialization. */
- write_short_reg(devrec, REG_SOFTRST, 0x07);
- write_short_reg(devrec, REG_PACON2, 0x98);
- write_short_reg(devrec, REG_TXSTBL, 0x95);
- write_long_reg(devrec, REG_RFCON0, 0x03);
- write_long_reg(devrec, REG_RFCON1, 0x01);
- write_long_reg(devrec, REG_RFCON2, 0x80);
- write_long_reg(devrec, REG_RFCON6, 0x90);
- write_long_reg(devrec, REG_RFCON7, 0x80);
- write_long_reg(devrec, REG_RFCON8, 0x10);
- write_long_reg(devrec, REG_SLPCON1, 0x21);
- write_short_reg(devrec, REG_BBREG2, 0x80);
- write_short_reg(devrec, REG_CCAEDTH, 0x60);
- write_short_reg(devrec, REG_BBREG6, 0x40);
- write_short_reg(devrec, REG_RFCTL, 0x04);
- write_short_reg(devrec, REG_RFCTL, 0x0);
- udelay(192);
-
- /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
- ret = read_short_reg(devrec, REG_RXMCR, &val);
+ ret = mrf24j40_hw_init(devrec);
if (ret)
- goto err_read_reg;
- val &= ~0x3; /* Clear RX mode (normal) */
- write_short_reg(devrec, REG_RXMCR, val);
+ goto err_hw_init;
ret = devm_request_threaded_irq(&spi->dev,
spi->irq,
@@ -692,7 +755,7 @@ static int mrf24j40_probe(struct spi_device *spi)
return 0;
err_irq:
-err_read_reg:
+err_hw_init:
ieee802154_unregister_device(devrec->dev);
err_register_device:
ieee802154_free_device(devrec->dev);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
