ChangeSet 1.2097, 2005/03/02 12:16:37-08:00, [EMAIL PROTECTED]
[PATCH] I2C: use time_after instead of comparing jiffies
Signed-off-by: Alexey Dobriyan <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
drivers/i2c/chips/adm1021.c | 5 +++--
drivers/i2c/chips/adm1025.c | 5 ++---
drivers/i2c/chips/adm1026.c | 7 ++++---
drivers/i2c/chips/adm1031.c | 5 +++--
drivers/i2c/chips/asb100.c | 4 ++--
drivers/i2c/chips/ds1621.c | 5 +++--
drivers/i2c/chips/eeprom.c | 4 ++--
drivers/i2c/chips/fscher.c | 4 ++--
drivers/i2c/chips/gl518sm.c | 5 +++--
drivers/i2c/chips/it87.c | 5 +++--
drivers/i2c/chips/lm63.c | 5 ++---
drivers/i2c/chips/lm75.c | 5 +++--
drivers/i2c/chips/lm77.c | 5 +++--
drivers/i2c/chips/lm78.c | 5 +++--
drivers/i2c/chips/lm80.c | 5 ++---
drivers/i2c/chips/lm83.c | 5 ++---
drivers/i2c/chips/lm85.c | 5 +++--
drivers/i2c/chips/lm87.c | 5 ++---
drivers/i2c/chips/lm90.c | 5 ++---
drivers/i2c/chips/max1619.c | 6 ++----
drivers/i2c/chips/pc87360.c | 4 ++--
drivers/i2c/chips/smsc47b397.c | 5 ++---
drivers/i2c/chips/smsc47m1.c | 4 ++--
drivers/i2c/chips/via686a.c | 6 +++---
drivers/i2c/chips/w83627hf.c | 5 +++--
drivers/i2c/chips/w83781d.c | 6 +++---
drivers/i2c/chips/w83l785ts.c | 5 ++---
27 files changed, 68 insertions(+), 67 deletions(-)
diff -Nru a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c
--- a/drivers/i2c/chips/adm1021.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1021.c 2005-03-04 12:24:50 -08:00
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -369,8 +370,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting adm1021 update\n");
data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
diff -Nru a/drivers/i2c/chips/adm1025.c b/drivers/i2c/chips/adm1025.c
--- a/drivers/i2c/chips/adm1025.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1025.c 2005-03-04 12:24:50 -08:00
@@ -49,6 +49,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -505,9 +506,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int i;
dev_dbg(&client->dev, "Updating data.\n");
diff -Nru a/drivers/i2c/chips/adm1026.c b/drivers/i2c/chips/adm1026.c
--- a/drivers/i2c/chips/adm1026.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1026.c 2005-03-04 12:24:50 -08:00
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -573,7 +574,7 @@
down(&data->update_lock);
if (!data->valid
- || (jiffies - data->last_reading > ADM1026_DATA_INTERVAL)) {
+ || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL))
{
/* Things that change quickly */
dev_dbg(&client->dev,"Reading sensor values\n");
for (i = 0;i <= 16;++i) {
@@ -620,8 +621,8 @@
data->last_reading = jiffies;
}; /* last_reading */
- if (!data->valid || (jiffies - data->last_config >
- ADM1026_CONFIG_INTERVAL)) {
+ if (!data->valid ||
+ time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
for (i = 0;i <= 16;++i) {
diff -Nru a/drivers/i2c/chips/adm1031.c b/drivers/i2c/chips/adm1031.c
--- a/drivers/i2c/chips/adm1031.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1031.c 2005-03-04 12:24:50 -08:00
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -884,8 +885,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting adm1031 update\n");
for (chan = 0;
diff -Nru a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c
--- a/drivers/i2c/chips/asb100.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/asb100.c 2005-03-04 12:24:50 -08:00
@@ -965,8 +965,8 @@
down(&data->update_lock);
- if (time_after(jiffies - data->last_updated, (unsigned long)(HZ+HZ/2))
- || time_before(jiffies, data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "starting device update...\n");
diff -Nru a/drivers/i2c/chips/ds1621.c b/drivers/i2c/chips/ds1621.c
--- a/drivers/i2c/chips/ds1621.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/ds1621.c 2005-03-04 12:24:50 -08:00
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include "lm75.h"
@@ -284,8 +285,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting ds1621 update\n");
diff -Nru a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
--- a/drivers/i2c/chips/eeprom.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/eeprom.c 2005-03-04 12:24:50 -08:00
@@ -32,6 +32,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -86,8 +87,7 @@
down(&data->update_lock);
if (!(data->valid & (1 << slice)) ||
- (jiffies - data->last_updated[slice] > 300 * HZ) ||
- (jiffies < data->last_updated[slice])) {
+ time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
dev_dbg(&client->dev, "Starting eeprom update, slice %u\n",
slice);
if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
diff -Nru a/drivers/i2c/chips/fscher.c b/drivers/i2c/chips/fscher.c
--- a/drivers/i2c/chips/fscher.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/fscher.c 2005-03-04 12:24:50 -08:00
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -411,8 +412,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > 2 * HZ) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
dev_dbg(&client->dev, "Starting fscher update\n");
diff -Nru a/drivers/i2c/chips/gl518sm.c b/drivers/i2c/chips/gl518sm.c
--- a/drivers/i2c/chips/gl518sm.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/gl518sm.c 2005-03-04 12:24:50 -08:00
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -505,8 +506,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting gl518 update\n");
data->alarms = gl518_read_value(client, GL518_REG_INT);
diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
--- a/drivers/i2c/chips/it87.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/it87.c 2005-03-04 12:24:50 -08:00
@@ -35,6 +35,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1083,8 +1084,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
if (update_vbat) {
/* Cleared after each update, so reenable. Value
diff -Nru a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c
--- a/drivers/i2c/chips/lm63.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm63.c 2005-03-04 12:24:50 -08:00
@@ -41,6 +41,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -492,9 +493,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
if (data->config & 0x04) { /* tachometer enabled */
/* order matters for fan1_input */
data->fan1_input = i2c_smbus_read_byte_data(client,
diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
--- a/drivers/i2c/chips/lm75.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm75.c 2005-03-04 12:24:50 -08:00
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include "lm75.h"
@@ -259,8 +260,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting lm75 update\n");
data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
diff -Nru a/drivers/i2c/chips/lm77.c b/drivers/i2c/chips/lm77.c
--- a/drivers/i2c/chips/lm77.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm77.c 2005-03-04 12:24:50 -08:00
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -360,8 +361,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting lm77 update\n");
data->temp_input =
LM77_TEMP_FROM_REG(lm77_read_value(client,
diff -Nru a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c
--- a/drivers/i2c/chips/lm78.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm78.c 2005-03-04 12:24:50 -08:00
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <asm/io.h>
@@ -704,8 +705,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting lm78 update\n");
diff -Nru a/drivers/i2c/chips/lm80.c b/drivers/i2c/chips/lm80.c
--- a/drivers/i2c/chips/lm80.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm80.c 2005-03-04 12:24:50 -08:00
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -529,9 +530,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > 2 * HZ) ||
- (jiffies < data->last_updated) || !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
dev_dbg(&client->dev, "Starting lm80 update\n");
for (i = 0; i <= 6; i++) {
data->in[i] =
diff -Nru a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c
--- a/drivers/i2c/chips/lm83.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm83.c 2005-03-04 12:24:50 -08:00
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -362,9 +363,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int nr;
dev_dbg(&client->dev, "Updating lm83 data.\n");
diff -Nru a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
--- a/drivers/i2c/chips/lm85.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm85.c 2005-03-04 12:24:50 -08:00
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1354,7 +1355,7 @@
down(&data->update_lock);
if ( !data->valid ||
- (jiffies - data->last_reading > LM85_DATA_INTERVAL ) ) {
+ time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
/* Things that change quickly */
dev_dbg(&client->dev, "Reading sensor values\n");
@@ -1408,7 +1409,7 @@
}; /* last_reading */
if ( !data->valid ||
- (jiffies - data->last_config > LM85_CONFIG_INTERVAL) ) {
+ time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
diff -Nru a/drivers/i2c/chips/lm87.c b/drivers/i2c/chips/lm87.c
--- a/drivers/i2c/chips/lm87.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm87.c 2005-03-04 12:24:50 -08:00
@@ -56,6 +56,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -713,9 +714,7 @@
down(&data->update_lock);
- if (jiffies - data->last_updated > HZ
- || jiffies < data->last_updated
- || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
int i, j;
dev_dbg(&client->dev, "Updating data.\n");
diff -Nru a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c
--- a/drivers/i2c/chips/lm90.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm90.c 2005-03-04 12:24:50 -08:00
@@ -66,6 +66,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -488,9 +489,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
u8 oldh, newh;
dev_dbg(&client->dev, "Updating lm90 data.\n");
diff -Nru a/drivers/i2c/chips/max1619.c b/drivers/i2c/chips/max1619.c
--- a/drivers/i2c/chips/max1619.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/max1619.c 2005-03-04 12:24:50 -08:00
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -324,10 +325,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Updating max1619 data.\n");
data->temp_input1 = i2c_smbus_read_byte_data(client,
MAX1619_REG_R_LOCAL_TEMP);
diff -Nru a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c
--- a/drivers/i2c/chips/pc87360.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/pc87360.c 2005-03-04 12:24:50 -08:00
@@ -37,6 +37,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1174,8 +1175,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2)
- || (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Data update\n");
/* Fans */
diff -Nru a/drivers/i2c/chips/smsc47b397.c b/drivers/i2c/chips/smsc47b397.c
--- a/drivers/i2c/chips/smsc47b397.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/smsc47b397.c 2005-03-04 12:24:50 -08:00
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/init.h>
@@ -130,9 +131,7 @@
down(&data->update_lock);
- if (time_after(jiffies - data->last_updated, (unsigned long)HZ)
- || time_before(jiffies, data->last_updated) || !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
dev_dbg(&client->dev, "starting device update...\n");
/* 4 temperature inputs, 4 fan inputs */
diff -Nru a/drivers/i2c/chips/smsc47m1.c b/drivers/i2c/chips/smsc47m1.c
--- a/drivers/i2c/chips/smsc47m1.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/smsc47m1.c 2005-03-04 12:24:50 -08:00
@@ -28,6 +28,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/init.h>
@@ -527,8 +528,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || init) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
int i;
for (i = 0; i < 2; i++) {
diff -Nru a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
--- a/drivers/i2c/chips/via686a.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/via686a.c 2005-03-04 12:24:50 -08:00
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/init.h>
@@ -726,9 +727,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
for (i = 0; i <= 4; i++) {
data->in[i] =
via686a_read_value(client, VIA686A_REG_IN(i));
diff -Nru a/drivers/i2c/chips/w83627hf.c b/drivers/i2c/chips/w83627hf.c
--- a/drivers/i2c/chips/w83627hf.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/w83627hf.c 2005-03-04 12:24:50 -08:00
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1371,8 +1372,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
for (i = 0; i <= 8; i++) {
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
diff -Nru a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
--- a/drivers/i2c/chips/w83781d.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/w83781d.c 2005-03-04 12:24:50 -08:00
@@ -39,6 +39,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1609,9 +1610,8 @@
down(&data->update_lock);
- if (time_after
- (jiffies - data->last_updated, (unsigned long) (HZ + HZ / 2))
- || time_before(jiffies, data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(dev, "Starting device update\n");
for (i = 0; i <= 8; i++) {
diff -Nru a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c
--- a/drivers/i2c/chips/w83l785ts.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/w83l785ts.c 2005-03-04 12:24:50 -08:00
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -294,9 +295,7 @@
down(&data->update_lock);
- if (!data->valid
- || (jiffies - data->last_updated > HZ * 2)
- || (jiffies < data->last_updated)) {
+ if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
dev_dbg(&client->dev, "Updating w83l785ts data.\n");
data->temp = w83l785ts_read_value(client,
W83L785TS_REG_TEMP, data->temp);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
