Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q
SoC has 3 USB host controller, compatible with ChipIdea.
Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index b74e5ec66354..a6902ea5580c 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -87,6 +87,39 @@
#interrupt-cells = <3>;
};
+ usb_phy2: usbphy@a2f400 {
+ compatible = "marvell,berlin-usbphy";
+ reg = <0xa2f400 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 14>;
+ status = "disabled";
+ };
+
+ usb2: usb@a30000 {
+ compatible = "marvell,berlin-usb";
+ reg = <0xa30000 0x10000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB2>;
+ marvell,usbphy = <&usb_phy2>;
+ status = "disabled";
+ };
+
+ usb_phy0: usbphy@b74000 {
+ compatible = "marvell,berlin-usbphy";
+ reg = <0xb74000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 12>;
+ status = "disabled";
+ };
+
+ usb_phy1: usbphy@b78000 {
+ compatible = "marvell,berlin-usbphy";
+ reg = <0xb78000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 13>;
+ status = "disabled";
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -280,6 +313,24 @@
clock-names = "refclk";
};
+ usb0: usb@ed0000 {
+ compatible = "marvell,berlin-usb";
+ reg = <0xed0000 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB0>;
+ marvell,usbphy = <&usb_phy0>;
+ status = "disabled";
+ };
+
+ usb1: usb@ee0000 {
+ compatible = "marvell,berlin-usb";
+ reg = <0xee0000 0x10000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB1>;
+ marvell,usbphy = <&usb_phy1>;
+ status = "disabled";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
