On Mon, May 26, 2014 at 11:33:29PM +0200, Sebastian Hesselbarth wrote:
> As Mainlining effort for SolidRun CuBox has been carried out on the
> Engineering Sample, the board DTS was reflecting this. Actually,
> SolidRun CuBox comes in three different variants: Engineering Sample (ES),
> production with 1GB RAM (1G), and production with 2GB RAM (2G).
>
> Therefore, we split the current dove-cubox.dts into a common board include
> and one board dts for each of the above variants.
>
> Signed-off-by: Sebastian Hesselbarth <[email protected]>
> ---
> Cc: Rob Herring <[email protected]>
> Cc: Pawel Moll <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: Ian Campbell <[email protected]>
> Cc: Kumar Gala <[email protected]>
> Cc: Russell King <[email protected]>
> Cc: Jason Cooper <[email protected]>
> Cc: Andrew Lunn <[email protected]>
> Cc: Gregory Clement <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> ---
> arch/arm/boot/dts/Makefile | 4 +++-
> arch/arm/boot/dts/dove-cubox-1g.dts | 17 ++++++++++++++++
> arch/arm/boot/dts/dove-cubox-2g.dts | 17 ++++++++++++++++
> arch/arm/boot/dts/dove-cubox-es.dts | 23
> ++++++++++++++++++++++
> .../boot/dts/{dove-cubox.dts => dove-cubox.dtsi} | 17 ----------------
> 5 files changed, 60 insertions(+), 18 deletions(-)
> create mode 100644 arch/arm/boot/dts/dove-cubox-1g.dts
> create mode 100644 arch/arm/boot/dts/dove-cubox-2g.dts
> create mode 100644 arch/arm/boot/dts/dove-cubox-es.dts
> rename arch/arm/boot/dts/{dove-cubox.dts => dove-cubox.dtsi} (86%)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 35c146f31e46..40a008539c0c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -404,7 +404,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
> armada-xp-matrix.dtb \
> armada-xp-openblocks-ax3-4.dtb
> dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
> - dove-cubox.dtb \
> + dove-cubox-1g.dtb \
> + dove-cubox-2g.dtb \
> + dove-cubox-es.dtb \
> dove-d2plug.dtb \
> dove-d3plug.dtb \
> dove-dove-db.dtb
> diff --git a/arch/arm/boot/dts/dove-cubox-1g.dts
> b/arch/arm/boot/dts/dove-cubox-1g.dts
> new file mode 100644
> index 000000000000..eebd3f7ca7e6
> --- /dev/null
> +++ b/arch/arm/boot/dts/dove-cubox-1g.dts
> @@ -0,0 +1,17 @@
> +/dts-v1/;
> +
> +#include "dove-cubox.dtsi"
> +
> +/ {
> + model = "SolidRun CuBox (1G)";
> + compatible = "solidrun,cubox-1g", "solidrun,cubox", "marvell,dove";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x40000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200n8 earlyprintk";
> + };
> +};
> diff --git a/arch/arm/boot/dts/dove-cubox-2g.dts
> b/arch/arm/boot/dts/dove-cubox-2g.dts
> new file mode 100644
> index 000000000000..513b6a68eba3
> --- /dev/null
> +++ b/arch/arm/boot/dts/dove-cubox-2g.dts
> @@ -0,0 +1,17 @@
> +/dts-v1/;
> +
> +#include "dove-cubox.dtsi"
> +
> +/ {
> + model = "SolidRun CuBox (2G)";
> + compatible = "solidrun,cubox-2g", "solidrun,cubox", "marvell,dove";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x80000000>;
Do you anticipate any other differences between the 1G and the 2G?
Otherwise, I'm inclined to just have a "solidrun,cubox". The bootloader
should be setting the amount of RAM at boottime anyway.
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200n8 earlyprintk";
> + };
> +};
> diff --git a/arch/arm/boot/dts/dove-cubox-es.dts
> b/arch/arm/boot/dts/dove-cubox-es.dts
> new file mode 100644
> index 000000000000..5fc17ce34c98
> --- /dev/null
> +++ b/arch/arm/boot/dts/dove-cubox-es.dts
> @@ -0,0 +1,23 @@
> +/dts-v1/;
> +
> +#include "dove-cubox.dtsi"
> +
> +/ {
> + model = "SolidRun CuBox (ES)";
"Engineering Sample" ?
thx,
Jason.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
