(Ccing linux-serial)

On 24 May 03:24 PM, Ezequiel Garcia wrote:
> This Multi-IO card has one serial 16550-like and one parallel port connector.
> Here's the lspci output, after this commit is applied:
> 
> 03:07.0 Serial controller: Device 4348:5053 (rev 10) (prog-if 02 [16550])
>       Subsystem: Device 4348:5053
>       Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Interrupt: pin A routed to IRQ 21
>       Region 0: I/O ports at cf00 [size=8]
>       Region 1: I/O ports at ce00 [size=8]
>       Kernel driver in use: parport_serial
>       Kernel modules: 8250_pci, parport_serial
> 
> This commit adds an entry with the device ID to the blacklist declared in
> 8250_pci to prevent the driver from taking ownership. Also, and as was done
> for the 2S/1P variant, add a quirk to skip autodetection and set the correct
> type to 16550A clone.
> 
> Proper entries are added to parport_serial, to support the device parallel
> and serial ports.
> 
> Cc: Gianluca Anzolin <gianl...@sottospazio.it>
> Cc: Alan Cox <a...@linux.intel.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Signed-off-by: Ezequiel Garcia <ezequiel.gar...@free-electrons.com>
> ---
>  drivers/parport/parport_serial.c   |  9 +++++++++
>  drivers/tty/serial/8250/8250_pci.c | 10 ++++++++++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/drivers/parport/parport_serial.c 
> b/drivers/parport/parport_serial.c
> index ff53314..ee93200 100644
> --- a/drivers/parport/parport_serial.c
> +++ b/drivers/parport/parport_serial.c
> @@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
>       timedia_9079a,
>       timedia_9079b,
>       timedia_9079c,
> +     wch_ch353_1s1p,
>       wch_ch353_2s1p,
>       sunix_2s1p,
>  };
> @@ -148,6 +149,7 @@ static struct parport_pc_pci cards[] = {
>       /* timedia_9079a */             { 1, { { 2, 3 }, } },
>       /* timedia_9079b */             { 1, { { 2, 3 }, } },
>       /* timedia_9079c */             { 1, { { 2, 3 }, } },
> +     /* wch_ch353_1s1p*/             { 1, { { 1, -1}, } },
>       /* wch_ch353_2s1p*/             { 1, { { 2, -1}, } },
>       /* sunix_2s1p */                { 1, { { 3, -1 }, } },
>  };
> @@ -253,6 +255,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
>       { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
>  
>       /* WCH CARDS */
> +     { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
>       { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
>  
>       /*
> @@ -479,6 +482,12 @@ static struct pciserial_board 
> pci_parport_serial_boards[] = {
>               .base_baud      = 921600,
>               .uart_offset    = 8,
>       },
> +     [wch_ch353_1s1p] = {
> +             .flags          = FL_BASE0|FL_BASE_BARS,
> +             .num_ports      = 1,
> +             .base_baud      = 115200,
> +             .uart_offset    = 8,
> +     },
>       [wch_ch353_2s1p] = {
>               .flags          = FL_BASE0|FL_BASE_BARS,
>               .num_ports      = 2,
> diff --git a/drivers/tty/serial/8250/8250_pci.c 
> b/drivers/tty/serial/8250/8250_pci.c
> index b14bcba..f35a85f 100644
> --- a/drivers/tty/serial/8250/8250_pci.c
> +++ b/drivers/tty/serial/8250/8250_pci.c
> @@ -1778,6 +1778,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
>  #define PCI_DEVICE_ID_WCH_CH352_2S   0x3253
>  #define PCI_DEVICE_ID_WCH_CH353_4S   0x3453
>  #define PCI_DEVICE_ID_WCH_CH353_2S1PF        0x5046
> +#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053
>  #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
>  #define PCI_VENDOR_ID_AGESTAR                0x5372
>  #define PCI_DEVICE_ID_AGESTAR_9375   0x6872
> @@ -2410,6 +2411,14 @@ static struct pci_serial_quirk pci_serial_quirks[] 
> __refdata = {
>               .subdevice      = PCI_ANY_ID,
>               .setup          = pci_omegapci_setup,
>       },
> +     /* WCH CH353 1S1P card (16550 clone) */
> +     {
> +             .vendor         = PCI_VENDOR_ID_WCH,
> +             .device         = PCI_DEVICE_ID_WCH_CH353_1S1P,
> +             .subvendor      = PCI_ANY_ID,
> +             .subdevice      = PCI_ANY_ID,
> +             .setup          = pci_wch_ch353_setup,
> +     },
>       /* WCH CH353 2S1P card (16550 clone) */
>       {
>               .vendor         = PCI_VENDOR_ID_WCH,
> @@ -3526,6 +3535,7 @@ static const struct pci_device_id blacklist[] = {
>  
>       /* multi-io cards handled by parport_serial */
>       { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
> +     { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
>  };
>  
>  /*
> -- 
> 1.9.1
> 

-- 
Ezequiel GarcĂ­a, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to