On Tuesday 01 March 2005 22:38, Benjamin Herrenschmidt wrote: > On Tue, 2005-03-01 at 12:36 +0100, Mws wrote: > > hi benjamin > > > > now i had some spare time to do some investigation > > > > booting the 2.6.11-rc5 with radeonfb.default_dynclk=0 or with -1 > > brings up a framebuffer console. everything is fine. > > starting xorg-x11 with Ati binary only drivers just brings up a black screen > > without a mouse cursor and freezes the hole machine. even network ect. > > is no more reachable from outside the machine. worst thing out of that > > a tail on the log files (on another machine) does immediately stop - also > > no > > output is written to syslog :/ > > > > next scenario - test 2.6.11-rc5 with radeonfb.default_dynclock=0 and -1 > > starting xorg-x11 with Xorg Radeon driver. > > a grey screen comes up - mouse cursor is visible and also able to move for > > 5 - 8 seconds after screen display - then freezes the whole machine again. > > Ok, so it's not dynamic clocks. At this point, i have no idea what's > going on. I don't yet have any access to PCI Express hardware. You > should report this to X.org list where others can try to help me track > this down. > > Ben.
it's possible to do so, but i also will try to find out whats going on. i don't know if i will have success. regards marcel
pgp2GpCGx86XC.pgp
Description: PGP signature
