On Tue, 1 Mar 2005 18:29:15 +0900, Tejun Heo <[EMAIL PROTECTED]> wrote:
> Hello,
>
> On Tue, Mar 01, 2005 at 09:42:18AM +0100, Bartlomiej Zolnierkiewicz wrote:
> > Hello,
> >
> > On Tue, 1 Mar 2005 13:21:16 +0900, Tejun Heo <[EMAIL PROTECTED]> wrote:
> > >
> > > So, how do you like the following set of TFLAG's?
> > >
> > > /* struct ata_taskfile flags */
> > >
> > > /* The following six flags are used by IDE driver to control register IO.
> > > */
> > > ATA_TFLAG_OUT_LBA48 = (1 << 0), /* enable 48-bit LBA and HOB
> > > out */
> >
> > aggregate ATA_TFLAG_OUT_HOB_LBA{L,M,H}?
> >
> > > ATA_TFLAG_OUT_ADDR = (1 << 1), /* enable out to nsect/lba
> > > regs */
> >
> > not needed currently, add it {when,if} it is needed
> >
>
> Sure, I'll add flags on as-needed basis. I was trying to show where
> I'm heading.
>
> > > ATA_TFLAG_OUT_DEVICE = (1 << 2), /* enable out to device reg
> > > */
> > > ATA_TFLAG_IN_LBA48 = (1 << 3), /* enable 48-bit LBA and HOB
> > > in */
> >
> > aggregate ATA_TFLAG_IN_HOB_LBA_{L,M,H}?
> >
> > > ATA_TFLAG_IN_ADDR = (1 << 4), /* enable in from nsect/lba
> > > regs */
> >
> > not needed currently, add it {when,if} it is needed
> >
> > > ATA_TFLAG_IN_DEVICE = (1 << 5), /* enable in from device reg
> > > */
> > >
> > > /* These three aggregate flags are used by libata, as it doesn't
> > > really need to optimize register INs */
> > > ATA_TFLAG_LBA48 = (ATA_TFLAG_OUT_LBA48 |
> > > ATA_TFLAG_IN_LBA48),
> > > ATA_TFLAG_ISADDR = (ATA_TFLAG_OUT_ADDR |
> > > ATA_TFLAG_IN_ADDR),
> > > ATA_TFLAG_DEVICE = (ATA_TFLAG_OUT_DEVICE |
> > > ATA_TFLAG_IN_DEVICE),
> > >
> > > ATA_TFLAG_WRITE = (1 << 6), /* data dir */
> > >
> > > /* The rest of TFLAGs are only for implementing ioctl direct drive
> > > commands in the IDE driver. DO NOT use in other places. */
> > > ATA_TFLAG_IO_16BIT = (1 << 11),
> > >
> > > ATA_TFLAG_OUT_FEATURE = (1 << 12),
> > > ATA_TFLAG_OUT_NSECT = (1 << 13),
> > > ATA_TFLAG_OUT_LBAL = (1 << 14),
> > > ATA_TFLAG_OUT_LBAM = (1 << 15),
> > > ATA_TFLAG_OUT_LBAH = (1 << 16),
> > > ATA_TFLAG_OUT_HOB_FEATURE = (1 << 17),
> > > ATA_TFLAG_OUT_HOB_NSECT = (1 << 18),
> > > ATA_TFLAG_OUT_HOB_LBAL = (1 << 19),
> > > ATA_TFLAG_OUT_HOB_LBAM = (1 << 20),
> > > ATA_TFLAG_OUT_HOB_LBAH = (1 << 21),
> > >
> > > ATA_TFLAG_IN_FEATURE = (1 << 22),
> > > ATA_TFLAG_IN_NSECT = (1 << 23),
> > > ATA_TFLAG_IN_LBAL = (1 << 24),
> > > ATA_TFLAG_IN_LBAM = (1 << 25),
> > > ATA_TFLAG_IN_LBAH = (1 << 26),
> > > ATA_TFLAG_IN_HOB_FEATURE = (1 << 27),
> > > ATA_TFLAG_IN_HOB_NSECT = (1 << 28),
> > > ATA_TFLAG_IN_HOB_LBAL = (1 << 29),
> > > ATA_TFLAG_IN_HOB_LBAM = (1 << 30),
> > > ATA_TFLAG_IN_HOB_LBAH = (1 << 31),
> >
> > proposed changes will get rid of 4 bits
> >
> > > ATA_TFLAG_OUT_MASK = 0x007ff000,
> > > ATA_TFLAG_IN_MASK = 0xffc00000,
> > > ATA_TFLAG_OUT_IN_MASK = (ATA_TFLAG_OUT_MASK |
> > > ATA_TFLAG_IN_MASK),
> > >
> > > ATA_TFLAG_{OUT|IN}_{LBA48|ADDR|DEVICE} should provide enough
> > > granuality for fs/internal requests without much hassle, and
> > > individual IO/OUT flags will only be used to implement ioctls in
> > > separate IN/OUT functions, something like ide_{load|read}_ioctl_task().
> >
> > They would be later used by IDE driver itself so names
> > like ide_discrete_tf_{load,read}() suits it better IMHO.
> >
> > > Would using more specific prefix for ioctl flags - like
> > > ATA_TFLAG_IOC_{IN|OUT}_* - be better?
> >
> > Nope, they are not limited to ioctls by design.
> >
>
> The reason why I separated the flags into two sets is that if we
> define IO flags as aggregate of separate flags, we'll end up with
> do_rw_taskfile() or something equivalent which handle both normal
> (fs/kernel-internal) and ioctl taskfiles, by design. From previous
> discussions, I kind of have the impression that you wanna separate the
> fully-flagged taskfile handling from the normal, supposedly simpler,
> taskfile handling. So, I was aiming for IO control flags with similar
> granuality w/ the current libata implementation.
Yes but it seems that you've assumed that ioctl == flagged taskfile
and fs/internal == normal taskfile which is _not_ what I aim for.
I want fully-flagged taskfile handling like flagged_taskfile() and "hot path"
simpler taskfile handling like do_rw_taskfile() (at least for now - we can
remove "hot path" later) where both can be used for fs/internal/ioctl requests
(depending on the flags).
> IMHO, handling both in the same path is better. It would be
> simpler/cleaner and, with simple optimizations, there would be
> virtually no overhead.
We can check this later.
> So, here's the second proposal of the flags.
>
> /* struct ata_taskfile flags */
>
> /* Individual register IO control flags */
> ATA_TFLAG_OUT_FEATURE = (1 << 0),
> ATA_TFLAG_OUT_NSECT = (1 << 1),
> ATA_TFLAG_OUT_LBAL = (1 << 2),
> ATA_TFLAG_OUT_LBAM = (1 << 3),
> ATA_TFLAG_OUT_LBAH = (1 << 4),
> ATA_TFLAG_OUT_HOB_FEATURE = (1 << 5),
> ATA_TFLAG_OUT_HOB_NSECT = (1 << 6),
> ATA_TFLAG_OUT_HOB_LBAL = (1 << 7),
> ATA_TFLAG_OUT_HOB_LBAM = (1 << 8),
> ATA_TFLAG_OUT_HOB_LBAH = (1 << 9),
> ATA_TFLAG_OUT_DEVICE = (1 << 10),
>
> ATA_TFLAG_IN_FEATURE = (1 << 11),
> ATA_TFLAG_IN_NSECT = (1 << 12),
> ATA_TFLAG_IN_LBAL = (1 << 13),
> ATA_TFLAG_IN_LBAM = (1 << 14),
> ATA_TFLAG_IN_LBAH = (1 << 15),
> ATA_TFLAG_IN_HOB_FEATURE = (1 << 16),
> ATA_TFLAG_IN_HOB_NSECT = (1 << 17),
> ATA_TFLAG_IN_HOB_LBAL = (1 << 18),
> ATA_TFLAG_IN_HOB_LBAM = (1 << 19),
> ATA_TFLAG_IN_HOB_LBAH = (1 << 20),
> ATA_TFLAG_IN_DEVICE = (1 << 21),
>
> /* The following four aggreate flags are used by IDE to control register IO.
> */
> ATA_TFLAG_OUT_LBA48 = (ATA_TFLAG_OUT_HOB_FEATURE |
> ATA_TFLAG_OUT_HOB_NSECT |
> ATA_TFLAG_OUT_HOB_LBAL |
> ATA_TFLAG_OUT_HOB_LBAM |
> ATA_TFLAG_OUT_HOB_LBAH ),
> ATA_TFLAG_OUT_ADDR = (ATA_TFLAG_OUT_FEATURE |
> ATA_TFLAG_OUT_NSECT |
> ATA_TFLAG_OUT_LBAL |
> ATA_TFLAG_OUT_LBAM |
> ATA_TFLAG_OUT_LBAH ),
> ATA_TFLAG_IN_LBA48 = (ATA_TFLAG_IN_HOB_FEATURE |
> ATA_TFLAG_IN_HOB_NSECT |
> ATA_TFLAG_IN_HOB_LBAL |
> ATA_TFLAG_IN_HOB_LBAM |
> ATA_TFLAG_IN_HOB_LBAH ),
> ATA_TFLAG_IN_ADDR = (ATA_TFLAG_IN_FEATURE |
> ATA_TFLAG_IN_NSECT |
> ATA_TFLAG_IN_LBAL |
> ATA_TFLAG_IN_LBAM |
> ATA_TFLAG_IN_LBAH ),
>
> /* These three aggregate flags are used by libata, as it doesn't
> really need to optimize register INs */
> ATA_TFLAG_LBA48 = (ATA_TFLAG_OUT_LBA48 | ATA_TFLAG_IN_LBA48
> ),
> ATA_TFLAG_ISADDR = (ATA_TFLAG_OUT_ADDR | ATA_TFLAG_IN_ADDR
> ),
> ATA_TFLAG_DEVICE = (ATA_TFLAG_OUT_DEVICE |
> ATA_TFLAG_IN_DEVICE),
>
> ATA_TFLAG_WRITE = (1 << 22), /* data dir */
> ATA_TFLAG_IO_16BIT = (1 << 23), /* force 16bit pio (IDE) */
s/pio/PIO/
This version look perfect, at least from IDE driver POV. :-)
Thanks,
Bartlomiej
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
