Checks for CONFIG_I2C_PNX0105 were added in v2.6.28. But the related
Kconfig symbol has not been added to the tree. Remove these checks.
Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
---
Untested.
Note that there's no i2c-pnx0105.h in the tree.
arch/mips/pnx833x/common/platform.c | 73 -------------------------------------
1 file changed, 73 deletions(-)
diff --git a/arch/mips/pnx833x/common/platform.c
b/arch/mips/pnx833x/common/platform.c
index 2b7e837dc2e2..b4b774bc3178 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -33,11 +33,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#ifdef CONFIG_I2C_PNX0105
-/* Until i2c driver available in kernel.*/
-#include <linux/i2c-pnx0105.h>
-#endif
-
#include <irq.h>
#include <irq-mapping.h>
#include <pnx833x.h>
@@ -134,70 +129,6 @@ static struct platform_device pnx833x_usb_ehci_device = {
.resource = pnx833x_usb_ehci_resources,
};
-#ifdef CONFIG_I2C_PNX0105
-static struct resource pnx833x_i2c0_resources[] = {
- {
- .start = PNX833X_I2C0_PORTS_START,
- .end = PNX833X_I2C0_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PNX833X_PIC_I2C0_INT,
- .end = PNX833X_PIC_I2C0_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource pnx833x_i2c1_resources[] = {
- {
- .start = PNX833X_I2C1_PORTS_START,
- .end = PNX833X_I2C1_PORTS_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PNX833X_PIC_I2C1_INT,
- .end = PNX833X_PIC_I2C1_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
- {
- .base = PNX833X_I2C0_PORTS_START,
- .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is
faster */
- .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6
= 50kHz(Preferred HDCP) */
- .bus_addr = 0, /* no slave support */
- },
- {
- .base = PNX833X_I2C1_PORTS_START,
- .irq = -1, /* on high freq, polling is faster */
- /*.irq = PNX833X_PIC_I2C1_INT,*/
- .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a
safe default for now */
- .bus_addr = 0, /* no slave support */
- },
-};
-
-static struct platform_device pnx833x_i2c0_device = {
- .name = "i2c-pnx0105",
- .id = 0,
- .dev = {
- .platform_data = &pnx833x_i2c_dev[0],
- },
- .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources),
- .resource = pnx833x_i2c0_resources,
-};
-
-static struct platform_device pnx833x_i2c1_device = {
- .name = "i2c-pnx0105",
- .id = 1,
- .dev = {
- .platform_data = &pnx833x_i2c_dev[1],
- },
- .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources),
- .resource = pnx833x_i2c1_resources,
-};
-#endif
-
static u64 ethernet_dmamask = DMA_BIT_MASK(32);
static struct resource pnx833x_ethernet_resources[] = {
@@ -294,10 +225,6 @@ static struct platform_device pnx833x_flash_nand = {
static struct platform_device *pnx833x_platform_devices[] __initdata = {
&pnx833x_uart_device,
&pnx833x_usb_ehci_device,
-#ifdef CONFIG_I2C_PNX0105
- &pnx833x_i2c0_device,
- &pnx833x_i2c1_device,
-#endif
&pnx833x_ethernet_device,
&pnx833x_sata_device,
&pnx833x_flash_nand,
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
