This patch contains the following cleanups:
- make needlessly global code static
- scsiglue.c: remove the unused usb_stor_sense_notready
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
drivers/usb/storage/scsiglue.c | 9 ---------
drivers/usb/storage/scsiglue.h | 1 -
drivers/usb/storage/shuttle_usbat.c | 13 ++++++++-----
drivers/usb/storage/shuttle_usbat.h | 4 ----
drivers/usb/storage/transport.c | 5 +++--
drivers/usb/storage/transport.h | 5 -----
drivers/usb/storage/usb.c | 4 ++--
drivers/usb/storage/usb.h | 3 ---
8 files changed, 13 insertions(+), 31 deletions(-)
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/scsiglue.h.old
2005-02-28 23:17:23.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/scsiglue.h 2005-02-28
23:18:41.000000000 +0100
@@ -48,7 +48,6 @@
extern void usb_stor_report_device_reset(struct us_data *us);
-extern unsigned char usb_stor_sense_notready[18];
extern unsigned char usb_stor_sense_invalidCDB[18];
extern struct scsi_host_template usb_stor_host_template;
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/scsiglue.c.old
2005-02-28 23:18:51.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/scsiglue.c 2005-02-28
23:19:00.000000000 +0100
@@ -477,15 +477,6 @@
.module = THIS_MODULE
};
-/* For a device that is "Not Ready" */
-unsigned char usb_stor_sense_notready[18] = {
- [0] = 0x70, /* current error */
- [2] = 0x02, /* not ready */
- [7] = 0x0a, /* additional length */
- [12] = 0x04, /* not ready */
- [13] = 0x03 /* manual intervention */
-};
-
/* To Report "Illegal Request: Invalid Field in CDB */
unsigned char usb_stor_sense_invalidCDB[18] = {
[0] = 0x70, /* current error */
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/shuttle_usbat.h.old
2005-02-28 23:20:36.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/shuttle_usbat.h
2005-02-28 23:20:55.000000000 +0100
@@ -105,10 +105,6 @@
#define USBAT_FEAT_ET1 0x02
#define USBAT_FEAT_ET2 0x01
-/* Transport functions */
-int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
-int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
-
extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
extern int init_usbat(struct us_data *us);
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/shuttle_usbat.c.old
2005-02-28 23:19:48.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/shuttle_usbat.c
2005-02-28 23:22:52.000000000 +0100
@@ -61,7 +61,10 @@
#define LSB_of(s) ((s)&0xFF)
#define MSB_of(s) ((s)>>8)
-int transferred = 0;
+static int transferred = 0;
+
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
/*
* Convenience function to produce an ATAPI read/write sectors command
@@ -872,8 +875,8 @@
/*
* Set the transport function based on the device type
*/
-int usbat_set_transport(struct us_data *us,
- struct usbat_info *info)
+static int usbat_set_transport(struct us_data *us,
+ struct usbat_info *info)
{
int rc;
@@ -1417,7 +1420,7 @@
/*
* Transport for the HP 8200e
*/
-int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
{
int result;
unsigned char *status = us->iobuf;
@@ -1560,7 +1563,7 @@
/*
* Transport for USBAT02-based CompactFlash and similar storage devices
*/
-int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
{
int rc;
struct usbat_info *info = (struct usbat_info *) (us->extra);
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/transport.h.old
2005-02-28 23:23:10.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/transport.h 2005-02-28
23:23:56.000000000 +0100
@@ -169,13 +169,8 @@
extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
u8 request, u8 requesttype, u16 value, u16 index,
void *data, u16 size);
-extern int usb_stor_intr_transfer(struct us_data *us, void *buf,
- unsigned int length);
extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, unsigned int *act_len);
-extern int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
- struct scatterlist *sg, int num_sg, unsigned int length,
- unsigned int *act_len);
extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, int use_sg, int *residual);
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/transport.c.old
2005-02-28 23:23:25.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/transport.c 2005-02-28
23:24:26.000000000 +0100
@@ -383,7 +383,8 @@
* This routine always uses us->recv_intr_pipe as the pipe and
* us->ep_bInterval as the interrupt interval.
*/
-int usb_stor_intr_transfer(struct us_data *us, void *buf, unsigned int length)
+static int usb_stor_intr_transfer(struct us_data *us, void *buf,
+ unsigned int length)
{
int result;
unsigned int pipe = us->recv_intr_pipe;
@@ -436,7 +437,7 @@
* This function does basically the same thing as usb_stor_bulk_transfer_buf()
* above, but it uses the usbcore scatter-gather library.
*/
-int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
+static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
struct scatterlist *sg, int num_sg, unsigned int length,
unsigned int *act_len)
{
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/usb.h.old 2005-02-28
23:26:08.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/usb.h 2005-02-28
23:26:12.000000000 +0100
@@ -167,9 +167,6 @@
extra_data_destructor extra_destructor;/* extra data destructor */
};
-/* The structure which defines our driver */
-extern struct usb_driver usb_storage_driver;
-
/* Function to fill an inquiry response. See usb.c for details */
extern void fill_inquiry_response(struct us_data *us,
unsigned char *data, unsigned int data_len);
--- linux-2.6.11-rc4-mm1-full/drivers/usb/storage/usb.c.old 2005-02-28
23:25:13.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/usb/storage/usb.c 2005-02-28
23:25:58.000000000 +0100
@@ -225,7 +225,7 @@
{ NULL }
};
-struct usb_driver usb_storage_driver = {
+static struct usb_driver usb_storage_driver = {
.owner = THIS_MODULE,
.name = "usb-storage",
.probe = storage_probe,
@@ -811,7 +811,7 @@
}
/* Release all our dynamic resources */
-void usb_stor_release_resources(struct us_data *us)
+static void usb_stor_release_resources(struct us_data *us)
{
US_DEBUGP("-- %s\n", __FUNCTION__);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
