On Mon, 28 Feb 2005, Adrian Bunk wrote:
> This patch contains the following cleanups:
> - make needlessly global code static
As Christoph mentioned, the firmware images are auto-generated, so I'd
rather hold off on those deltas. Besides, I'm hoping in the near
future to drop the firmware from the distribution and begin to use the
request_firmware() interface exclusively.
> - kill the unused global *_version and *_version_str variables
> in the firmware files
>
The driver is also going through some significant overhauling with the
fc_remote_port stuffs -- where most internal queueing is stripped from
the driver.
> -static __inline__ void qla2x00_add_timer_to_cmd(srb_t *, int);
> -static __inline__ void qla2x00_delete_timer_from_cmd(srb_t *);
> -
> -/**************************************************************************
> -* qla2x00_add_timer_to_cmd
> -*
> -* Description:
> -* Creates a timer for the specified command. The timeout is usually
> -* the command time from kernel minus 2 secs.
> -*
> -* Input:
> -* sp - pointer to validate
> -*
> -* Returns:
> -* None.
> -**************************************************************************/
> -static inline void
> -qla2x00_add_timer_to_cmd(srb_t *sp, int timeout)
> -{
> - init_timer(&sp->timer);
> - sp->timer.expires = jiffies + timeout * HZ;
> - sp->timer.data = (unsigned long) sp;
> - sp->timer.function = (void (*) (unsigned long))qla2x00_cmd_timeout;
> - add_timer(&sp->timer);
> -}
> -
> -/**************************************************************************
> -* qla2x00_delete_timer_from_cmd
> -*
> -* Description:
> -* Delete the timer for the specified command.
> -*
> -* Input:
> -* sp - pointer to validate
> -*
> -* Returns:
> -* None.
> -**************************************************************************/
> -static inline void
> -qla2x00_delete_timer_from_cmd(srb_t *sp)
> -{
> - if (sp->timer.function != NULL) {
> - del_timer(&sp->timer);
> - sp->timer.function = NULL;
> - sp->timer.data = (unsigned long) NULL;
> - }
> -}
> -
these codes will be dropped from the driver.
> /*
> * SRB allocation cache
> */
> -char srb_cachep_name[16];
> -kmem_cache_t *srb_cachep;
> +static char srb_cachep_name[16];
> +static kmem_cache_t *srb_cachep;
>
> /*
> * Stats for all adpaters.
> @@ -47,13 +47,12 @@
> /*
> * Ioctl related information.
> */
> -int num_hosts;
> -int apiHBAInstance;
> +static int num_hosts;
>
> /*
> * Module parameter information and variables
> */
> -int ql2xmaxqdepth;
> +static int ql2xmaxqdepth;
> module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
> MODULE_PARM_DESC(ql2xmaxqdepth,
> "Maximum queue depth to report for target devices.");
> @@ -69,13 +68,13 @@
> "Maximum number of command retries to a port that returns"
> "a PORT-DOWN status.");
>
> -int ql2xretrycount = 20;
> +static int ql2xretrycount = 20;
> module_param(ql2xretrycount, int, S_IRUGO|S_IWUSR);
> MODULE_PARM_DESC(ql2xretrycount,
> "Maximum number of mid-layer retries allowed for a command. "
> "Default value is 20, ");
>
> -int displayConfig;
> +static int displayConfig;
> module_param(displayConfig, int, S_IRUGO|S_IWUSR);
> MODULE_PARM_DESC(displayConfig,
> "If 1 then display the configuration used in
> /etc/modprobe.conf.");
> @@ -100,7 +99,7 @@
> "ZIO: Waiting time for Firmware before it generates an "
> "interrupt to the host to notify completion of request.");
>
> -int ConfigRequired;
> +static int ConfigRequired;
> module_param(ConfigRequired, int, S_IRUGO|S_IRUSR);
> MODULE_PARM_DESC(ConfigRequired,
> "If 1, then only configured devices passed in through the"
> @@ -119,7 +118,7 @@
> "target returns a <NOT READY> status. Default is 10 "
> "iterations.");
>
> -int ql2xdoinitscan = 1;
> +static int ql2xdoinitscan = 1;
> module_param(ql2xdoinitscan, int, S_IRUGO|S_IWUSR);
> MODULE_PARM_DESC(ql2xdoinitscan,
> "Signal mid-layer to perform scan after driver load: 0 -- no "
> @@ -163,6 +162,8 @@
I'll queue-up these for the next set of patches.
Thanks,
Andrew Vasquez
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
