Very minor source and binary size reduction.
Signed-off-by: George Spelvin <[email protected]>
---
I spotted this while making the previous crc7 change.
This looks simple enough, but I don't actually have one of these devices to
test.
At least one other careful desk-check is solicited.
drivers/mmc/host/mmc_spi.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 338e2202ea..cc8d4a6099 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -448,7 +448,6 @@ mmc_spi_command_send(struct mmc_spi_host *host,
{
struct scratch *data = host->data;
u8 *cp = data->status;
- u32 arg = cmd->arg;
int status;
struct spi_transfer *t;
@@ -465,14 +464,12 @@ mmc_spi_command_send(struct mmc_spi_host *host,
* We init the whole buffer to all-ones, which is what we need
* to write while we're reading (later) response data.
*/
- memset(cp++, 0xff, sizeof(data->status));
+ memset(cp, 0xff, sizeof(data->status));
- *cp++ = 0x40 | cmd->opcode;
- *cp++ = (u8)(arg >> 24);
- *cp++ = (u8)(arg >> 16);
- *cp++ = (u8)(arg >> 8);
- *cp++ = (u8)arg;
- *cp++ = crc7_be(0, &data->status[1], 5) | 0x01;
+ cp[1] = 0x40 | cmd->opcode;
+ put_unaligned_be32(cmd->arg, cp+2);
+ cp[6] = crc7_be(0, cp+1, 5) | 0x01;
+ cp += 7;
/* Then, read up to 13 bytes (while writing all-ones):
* - N(CR) (== 1..8) bytes of all-ones
@@ -711,10 +708,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct
spi_transfer *t,
* so we have to cope with this situation and check the response
* bit-by-bit. Arggh!!!
*/
- pattern = scratch->status[0] << 24;
- pattern |= scratch->status[1] << 16;
- pattern |= scratch->status[2] << 8;
- pattern |= scratch->status[3];
+ pattern = get_unaligned_be32(scratch->status);
/* First 3 bit of pattern are undefined */
pattern |= 0xE0000000;
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
