Move at91sam9rl SoC to the new main/slow clock model.

Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
 arch/arm/boot/dts/at91sam9rl.dtsi | 46 +++++++++++++++++++++++++++++++++------
 1 file changed, 39 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi 
b/arch/arm/boot/dts/at91sam9rl.dtsi
index 63e1784..a19a7c2 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -48,6 +48,18 @@
                reg = <0x20000000 0x04000000>;
        };
 
+       slow_xtal: slow_xtal {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <0>;
+       };
+
+       main_xtal: main_xtal {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <0>;
+       };
+
        ahb {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -548,17 +560,11 @@
                                #size-cells = <0>;
                                #interrupt-cells = <1>;
 
-                               clk32k: slck {
-                                       compatible = "fixed-clock";
-                                       #clock-cells = <0>;
-                                       clock-frequency = <32768>;
-                               };
-
                                main: mainck {
                                        compatible = 
"atmel,at91rm9200-clk-main";
                                        #clock-cells = <0>;
                                        interrupts-extended = <&pmc 
AT91_PMC_MOSCS>;
-                                       clocks = <&clk32k>;
+                                       clocks = <&main_xtal>;
                                };
 
                                plla: pllack {
@@ -769,6 +775,32 @@
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                status = "disabled";
                        };
+
+                       sckc@fffffd50 {
+                               compatible = "atmel,at91sam9x5-sckc";
+                               reg = <0xfffffd50 0x4>;
+
+                               slow_osc: slow_osc {
+                                       compatible = 
"atmel,at91sam9x5-clk-slow-osc";
+                                       #clock-cells = <0>;
+                                       atmel,startup-time-usec = <1200000>;
+                                       clocks = <&slow_xtal>;
+                               };
+
+                               slow_rc_osc: slow_rc_osc {
+                                       compatible = 
"atmel,at91sam9x5-clk-slow-rc-osc";
+                                       #clock-cells = <0>;
+                                       atmel,startup-time-usec = <75>;
+                                       clock-frequency = <32768>;
+                                       clock-accuracy = <50000000>;
+                               };
+
+                               clk32k: slck {
+                                       compatible = 
"atmel,at91sam9x5-clk-slow";
+                                       #clock-cells = <0>;
+                                       clocks = <&slow_rc_osc &slow_osc>;
+                               };
+                       };
                };
        };
 
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to