On Sat, 19 Feb 2005, Linus Torvalds wrote:
>
> Does a patch like this (instead of your version) work for you? It removes
> the Intel quirk entirely, and replaces it with the "if there's no
> resource, use the parent resource as the default fallback" code.
Here's a very very slightly changed patch. The only addition is to make
the extra line of
b->resource[2] = &iomem_resource;
which makes the root PCI device have "iomem_resource" for both it's
prefetchable and non-prefetchable resource. That's damn subtle, but it
means that it the non-prefetchable one is overridden by a half-transparent
setup like I have, then in order to see a prefetchable area at all, you
want that root iomem_resource to "shine through" the transparent
prefetchable region.
Andrew, I think this should be tested in -mm. I think it will fix Stevens
laptop, and the more I think about it, the more convinced I am that is it
the RightThing to do.. But it could easily break something subtle.
Linus
----
===== arch/i386/pci/fixup.c 1.24 vs edited =====
--- 1.24/arch/i386/pci/fixup.c 2005-01-11 16:42:41 -08:00
+++ edited/arch/i386/pci/fixup.c 2005-02-19 22:21:42 -08:00
@@ -197,23 +197,6 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0,
pci_fixup_via_northbridge_bug);
/*
- * For some reasons Intel decided that certain parts of their
- * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
- * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
- * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
- * to Intel terminology. These devices do forward all addresses from
- * system to PCI bus no matter what are their window settings, so they are
- * "transparent" (or subtractive decoding) from programmers point of view.
- */
-static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
-{
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
- (dev->device & 0xff00) == 0x2400)
- dev->transparent = 1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
pci_fixup_transparent_bridge);
-
-/*
* Fixup for C1 Halt Disconnect problem on nForce2 systems.
*
* From information provided by "Allen Martin" <[EMAIL PROTECTED]>:
===== drivers/pci/probe.c 1.78 vs edited =====
--- 1.78/drivers/pci/probe.c 2005-02-02 22:42:24 -08:00
+++ edited/drivers/pci/probe.c 2005-02-19 22:44:24 -08:00
@@ -241,17 +241,20 @@
if (!dev) /* It's a host bus, nothing to read */
return;
+ /*
+ * We default to the parent resources, and override them only
+ * if this device has its own range defined.
+ */
+ for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++)
+ child->resource[i] = child->parent->resource[i];
+
if (dev->transparent) {
printk(KERN_INFO "PCI: Transparent bridge - %s\n",
pci_name(dev));
- for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++)
- child->resource[i] = child->parent->resource[i];
return;
}
- for(i=0; i<3; i++)
- child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
-
- res = child->resource[0];
+ /* Resource 0 - IO ports */
+ res = &dev->resource[PCI_BRIDGE_RESOURCES+0];
pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
@@ -269,9 +272,11 @@
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) |
IORESOURCE_IO;
res->start = base;
res->end = limit + 0xfff;
+ child->resource[0] = res;
}
- res = child->resource[1];
+ /* Resource 1 - nonprefetchable memory resource */
+ res = &dev->resource[PCI_BRIDGE_RESOURCES+1];
pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
@@ -280,9 +285,11 @@
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) |
IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
+ child->resource[1] = res;
}
- res = child->resource[2];
+ /* Resource 2 - prefetchable memory resource */
+ res = &dev->resource[PCI_BRIDGE_RESOURCES+2];
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
@@ -314,6 +321,7 @@
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
+ child->resource[2] = res;
}
}
@@ -912,6 +920,7 @@
b->number = b->secondary = bus;
b->resource[0] = &ioport_resource;
b->resource[1] = &iomem_resource;
+ b->resource[2] = &iomem_resource;
b->subordinate = pci_scan_child_bus(b);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
