On 03/20/2014 09:39 PM, Sebastian Hesselbarth wrote:
> This adds scu and general purpose registers device nodes required for
> SMP on Berlin BG2 and BG2Q SoCs. The secondary CPUs will pick their jump
> address from general purpose (SW generic) register 1.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>

Applied to berlin/dt.

> ---
>  arch/arm/boot/dts/berlin2.dtsi  | 10 ++++++++++
>  arch/arm/boot/dts/berlin2q.dtsi | 10 ++++++++++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
> index 56a1af2f1052..4d85312dc17a 100644
> --- a/arch/arm/boot/dts/berlin2.dtsi
> +++ b/arch/arm/boot/dts/berlin2.dtsi
> @@ -72,6 +72,11 @@
>                       cache-level = <2>;
>               };
>  
> +             scu: snoop-control-unit@ad0000 {
> +                     compatible = "arm,cortex-a9-scu";
> +                     reg = <0xad0000 0x58>;
> +             };
> +
>               gic: interrupt-controller@ad1000 {
>                       compatible = "arm,cortex-a9-gic";
>                       reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
> @@ -176,6 +181,11 @@
>                       };
>               };
>  
> +             generic-regs@ea0184 {
> +                     compatible = "marvell,berlin-generic-regs", "syscon";
> +                     reg = <0xea0184 0x10>;
> +             };
> +
>               apb@fc0000 {
>                       compatible = "simple-bus";
>                       #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 07452a7483fa..86d8a2c49f38 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -87,6 +87,11 @@
>                       cache-level = <2>;
>               };
>  
> +             scu: snoop-control-unit@ad0000 {
> +                     compatible = "arm,cortex-a9-scu";
> +                     reg = <0xad0000 0x58>;
> +             };
> +
>               local-timer@ad0600 {
>                       compatible = "arm,cortex-a9-twd-timer";
>                       reg = <0xad0600 0x20>;
> @@ -183,6 +188,11 @@
>                       };
>               };
>  
> +             generic-regs@ea0110 {
> +                     compatible = "marvell,berlin-generic-regs", "syscon";
> +                     reg = <0xea0110 0x10>;
> +             };
> +
>               apb@fc0000 {
>                       compatible = "simple-bus";
>                       #address-cells = <1>;
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to