This patch contains the following possible cleanups:
- make needlessly global code static
- remove unneeded EXPORT_SYMBOL's from irport.c
(the patch is a bit big since I moved some code to avoid some
forward declarations)
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
drivers/net/irda/irport.c | 127 ++++++++++++++++------------------
drivers/net/irda/irport.h | 10 --
drivers/net/irda/irtty-sir.c | 2
drivers/net/irda/smsc-ircc2.c | 2
4 files changed, 64 insertions(+), 77 deletions(-)
--- linux-2.6.11-rc3-mm2-full/drivers/net/irda/irtty-sir.c.old 2005-02-16
15:40:41.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/irda/irtty-sir.c 2005-02-16
15:40:52.000000000 +0100
@@ -413,7 +413,7 @@
/* ------------------------------------------------------- */
-struct sir_driver sir_tty_drv = {
+static struct sir_driver sir_tty_drv = {
.owner = THIS_MODULE,
.driver_name = "sir_tty",
.start_dev = irtty_start_dev,
--- linux-2.6.11-rc3-mm2-full/drivers/net/irda/smsc-ircc2.c.old 2005-02-16
15:41:08.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/irda/smsc-ircc2.c 2005-02-16
15:41:17.000000000 +0100
@@ -203,7 +203,7 @@
/* Transceivers for SMSC-ircc */
-smsc_transceiver_t smsc_transceivers[]=
+static smsc_transceiver_t smsc_transceivers[]=
{
{ "Toshiba Satellite 1800 (GP data pin select)",
smsc_ircc_set_transceiver_toshiba_sat1800,
smsc_ircc_probe_transceiver_toshiba_sat1800},
{ "Fast pin select",
smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select,
smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select},
--- linux-2.6.11-rc3-mm2-full/drivers/net/irda/irport.h.old 2005-02-16
15:42:36.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/irda/irport.h 2005-02-16
15:43:24.000000000 +0100
@@ -77,14 +77,4 @@
int (*interrupt)(int irq, void *dev_id, struct pt_regs *regs);
};
-struct irport_cb *irport_open(int i, unsigned int iobase, unsigned int irq);
-int irport_close(struct irport_cb *self);
-void irport_start(struct irport_cb *self);
-void irport_stop(struct irport_cb *self);
-void irport_change_speed(void *priv, __u32 speed);
-irqreturn_t irport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev);
-int irport_net_open(struct net_device *dev);
-int irport_net_close(struct net_device *dev);
-
#endif /* IRPORT_H */
--- linux-2.6.11-rc3-mm2-full/drivers/net/irda/irport.c.old 2005-02-16
15:43:34.000000000 +0100
+++ linux-2.6.11-rc3-mm2-full/drivers/net/irda/irport.c 2005-02-16
15:49:06.000000000 +0100
@@ -87,50 +87,14 @@
static int irport_change_speed_complete(struct irda_task *task);
static void irport_timeout(struct net_device *dev);
-EXPORT_SYMBOL(irport_open);
-EXPORT_SYMBOL(irport_close);
-EXPORT_SYMBOL(irport_start);
-EXPORT_SYMBOL(irport_stop);
-EXPORT_SYMBOL(irport_interrupt);
-EXPORT_SYMBOL(irport_hard_xmit);
-EXPORT_SYMBOL(irport_timeout);
-EXPORT_SYMBOL(irport_change_speed);
-EXPORT_SYMBOL(irport_net_open);
-EXPORT_SYMBOL(irport_net_close);
+static irqreturn_t irport_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+static int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static void irport_change_speed(void *priv, __u32 speed);
+static int irport_net_open(struct net_device *dev);
+static int irport_net_close(struct net_device *dev);
-static int __init irport_init(void)
-{
- int i;
-
- for (i=0; (io[i] < 2000) && (i < 4); i++) {
- if (irport_open(i, io[i], irq[i]) != NULL)
- return 0;
- }
- /*
- * Maybe something failed, but we can still be usable for FIR drivers
- */
- return 0;
-}
-
-/*
- * Function irport_cleanup ()
- *
- * Close all configured ports
- *
- */
-static void __exit irport_cleanup(void)
-{
- int i;
-
- IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
-
- for (i=0; i < 4; i++) {
- if (dev_self[i])
- irport_close(dev_self[i]);
- }
-}
-
-struct irport_cb *
+static struct irport_cb *
irport_open(int i, unsigned int iobase, unsigned int irq)
{
struct net_device *dev;
@@ -254,7 +218,7 @@
return NULL;
}
-int irport_close(struct irport_cb *self)
+static int irport_close(struct irport_cb *self)
{
ASSERT(self != NULL, return -1;);
@@ -285,40 +249,40 @@
return 0;
}
-void irport_start(struct irport_cb *self)
+static void irport_stop(struct irport_cb *self)
{
int iobase;
iobase = self->io.sir_base;
- irport_stop(self);
-
/* We can't lock, we may be called from a FIR driver - Jean II */
- /* Initialize UART */
- outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
- outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
+ /* We are not transmitting any more */
+ self->transmitting = 0;
+
+ /* Reset UART */
+ outb(0, iobase+UART_MCR);
- /* Turn on interrups */
- outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
+ /* Turn off interrupts */
+ outb(0, iobase+UART_IER);
}
-void irport_stop(struct irport_cb *self)
+static void irport_start(struct irport_cb *self)
{
int iobase;
iobase = self->io.sir_base;
+ irport_stop(self);
+
/* We can't lock, we may be called from a FIR driver - Jean II */
- /* We are not transmitting any more */
- self->transmitting = 0;
-
- /* Reset UART */
- outb(0, iobase+UART_MCR);
+ /* Initialize UART */
+ outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
+ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
- /* Turn off interrupts */
- outb(0, iobase+UART_IER);
+ /* Turn on interrups */
+ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
}
/*
@@ -368,7 +332,7 @@
*
* This function should be called with irq off and spin-lock.
*/
-void irport_change_speed(void *priv, __u32 speed)
+static void irport_change_speed(void *priv, __u32 speed)
{
struct irport_cb *self = (struct irport_cb *) priv;
int iobase;
@@ -619,7 +583,7 @@
* waits until the next transmitt interrupt, and continues until the
* frame is transmitted.
*/
-int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+static int irport_hard_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct irport_cb *self;
unsigned long flags;
@@ -814,7 +778,8 @@
*
* Interrupt handler
*/
-irqreturn_t irport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t irport_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
struct irport_cb *self;
@@ -888,7 +853,7 @@
* Network device is taken up. Usually this is done by "ifconfig irda0 up"
*
*/
-int irport_net_open(struct net_device *dev)
+static int irport_net_open(struct net_device *dev)
{
struct irport_cb *self;
int iobase;
@@ -941,7 +906,7 @@
* Network device is taken down. Usually this is done by
* "ifconfig irda0 down"
*/
-int irport_net_close(struct net_device *dev)
+static int irport_net_close(struct net_device *dev)
{
struct irport_cb *self;
int iobase;
@@ -1134,6 +1099,38 @@
return &self->stats;
}
+static int __init irport_init(void)
+{
+ int i;
+
+ for (i=0; (io[i] < 2000) && (i < 4); i++) {
+ if (irport_open(i, io[i], irq[i]) != NULL)
+ return 0;
+ }
+ /*
+ * Maybe something failed, but we can still be usable for FIR drivers
+ */
+ return 0;
+}
+
+/*
+ * Function irport_cleanup ()
+ *
+ * Close all configured ports
+ *
+ */
+static void __exit irport_cleanup(void)
+{
+ int i;
+
+ IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ irport_close(dev_self[i]);
+ }
+}
+
MODULE_PARM(io, "1-4i");
MODULE_PARM_DESC(io, "Base I/O addresses");
MODULE_PARM(irq, "1-4i");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
