with hdc=scsi haldeamon doesn't recognize cdwriter. but with hdc=ide-scsi (was the original from kernel 2.4) haldaamon reconize my cdwriter !
So this message of this subject just make me wast my time and lose my patience. ( because I forgot to enable haldaemon before to try understand the message ) Still don't understand if I should or not change to ide-cd on my FC3, if not please remove the message, if yes rewrite it please . thanks for your precious time. On Tue, 2005-02-15 at 20:36 +0000, Sergio Monteiro Basto wrote: > Well the problem for the common users is the haldeamon doesn't recognize > automatically /dev/scd0 and /etc/fstab don't have any entry about it. > > So with hdc=scsi, how I read cds on hdc ? > > thanks, > > Note: I am using last updates of FC3, after upgrade from FC1. > > > On Tue, 2005-02-15 at 17:02 +0000, Alan Cox wrote: > > On Maw, 2005-02-15 at 02:25, Randy.Dunlap wrote: > > > It means: don't use the ide-scsi driver. Support for it is > > > lagging (not well-maintained) because it's really not needed for > > > burning CDs. Just use the ide-cd driver (module) and > > > specify the CD burner device as /dev/hdX. > > > > This information is unfortunately *WRONG*. The base 2.6 ide-cd driver is > > vastly inferior to ide-scsi. The ide-scsi layer knows about proper error > > reporting, end of media and other things that ide-cd does not. > > > > The -ac ide-cd knows some of the stuff that ide-cd needs to and works > > with various drive/disk combinations the base code doesn't but ide-scsi > > still handles CD's better. > > > > Alan > > -- Sérgio M.B. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
