Use #defines from the common include file to describe
interrupt specifiers.
Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com>
---
Changes in v2: None
arch/arm/boot/dts/zynq-7000.dtsi | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 66613d04de5d..36a34ffa30af 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -12,6 +12,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "xlnx,zynq-7000";
@@ -44,7 +45,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 5 4>, <0 6 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6
IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
};
@@ -80,7 +81,7 @@
clocks = <&clkc 23>, <&clkc 40>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0000000 0x1000>;
- interrupts = <0 27 4>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
};
uart1: uart@e0001000 {
@@ -89,14 +90,14 @@
clocks = <&clkc 24>, <&clkc 41>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0001000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
gem0: ethernet@e000b000 {
compatible = "cdns,gem";
reg = <0xe000b000 0x4000>;
status = "disabled";
- interrupts = <0 22 4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
clock-names = "pclk", "hclk", "tx_clk";
};
@@ -105,7 +106,7 @@
compatible = "cdns,gem";
reg = <0xe000c000 0x4000>;
status = "disabled";
- interrupts = <0 45 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
clock-names = "pclk", "hclk", "tx_clk";
};
@@ -116,7 +117,7 @@
clock-names = "clk_xin", "clk_ahb";
clocks = <&clkc 21>, <&clkc 32>;
interrupt-parent = <&intc>;
- interrupts = <0 24 4>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xe0100000 0x1000>;
} ;
@@ -126,7 +127,7 @@
clock-names = "clk_xin", "clk_ahb";
clocks = <&clkc 22>, <&clkc 33>;
interrupt-parent = <&intc>;
- interrupts = <0 47 4>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xe0101000 0x1000>;
} ;
@@ -160,14 +161,16 @@
global_timer: timer@f8f00200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xf8f00200 0x20>;
- interrupts = <1 11 0x301>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_EDGE_RISING)>;
interrupt-parent = <&intc>;
clocks = <&clkc 4>;
};
ttc0: ttc0@f8001000 {
interrupt-parent = <&intc>;
- interrupts = < 0 10 4 0 11 4 0 12 4 >;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
compatible = "cdns,ttc";
clocks = <&clkc 6>;
reg = <0xF8001000 0x1000>;
@@ -175,14 +178,16 @@
ttc1: ttc1@f8002000 {
interrupt-parent = <&intc>;
- interrupts = < 0 37 4 0 38 4 0 39 4 >;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
compatible = "cdns,ttc";
clocks = <&clkc 6>;
reg = <0xF8002000 0x1000>;
};
scutimer: scutimer@f8f00600 {
interrupt-parent = <&intc>;
- interrupts = < 1 13 0x301 >;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_EDGE_RISING)>;
compatible = "arm,cortex-a9-twd-timer";
reg = < 0xf8f00600 0x20 >;
clocks = <&clkc 4>;
--
1.9.1.1.gbb9f595
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
