> Subject: Re: [PATCHv3 2/2] watchdog: imx2_wdt: convert to use regmap API.
>
> On Tue, Apr 01, 2014 at 12:46:38PM +0800, Xiubo Li wrote:
> > Signed-off-by: Xiubo Li <li.xi...@freescale.com>
> > Cc: Guenter Roeck <li...@roeck-us.net>
>
> We should probably have some commit log to explain why we need to move
> to use regmap API.
>
Well, yes, I will send V4 series to do the explaination.
Thanks :)
BRs
Xiubo
> Shawn
>
> > ---
> > drivers/watchdog/imx2_wdt.c | 50 +++++++++++++++++++++++++++++-------------
> ---
> > 1 file changed, 32 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> > index 1795922..76fa724 100644
> > --- a/drivers/watchdog/imx2_wdt.c
> > +++ b/drivers/watchdog/imx2_wdt.c
> > @@ -31,6 +31,7 @@
> > #include <linux/module.h>
> > #include <linux/moduleparam.h>
> > #include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > #include <linux/timer.h>
> > #include <linux/uaccess.h>
> > #include <linux/watchdog.h>
> > @@ -61,7 +62,7 @@
> >
> > static struct {
> > struct clk *clk;
> > - void __iomem *base;
> > + struct regmap *regmap;
> > unsigned timeout;
> > unsigned long status;
> > struct timer_list timer; /* Pings the watchdog when closed */
> > @@ -87,7 +88,9 @@ static const struct watchdog_info imx2_wdt_info = {
> >
> > static inline void imx2_wdt_setup(void)
> > {
> > - u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
> > + u32 val;
> > +
> > + regmap_read(imx2_wdt.regmap, IMX2_WDT_WCR, &val);
> >
> > /* Suspend timer in low power mode, write once-only */
> > val |= IMX2_WDT_WCR_WDZST;
> > @@ -100,17 +103,17 @@ static inline void imx2_wdt_setup(void)
> > /* Set the watchdog's Time-Out value */
> > val |= WDOG_SEC_TO_COUNT(imx2_wdt.timeout);
> >
> > - __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
> > + regmap_write(imx2_wdt.regmap, IMX2_WDT_WCR, val);
> >
> > /* enable the watchdog */
> > val |= IMX2_WDT_WCR_WDE;
> > - __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
> > + regmap_write(imx2_wdt.regmap, IMX2_WDT_WCR, val);
> > }
> >
> > static inline void imx2_wdt_ping(void)
> > {
> > - __raw_writew(IMX2_WDT_SEQ1, imx2_wdt.base + IMX2_WDT_WSR);
> > - __raw_writew(IMX2_WDT_SEQ2, imx2_wdt.base + IMX2_WDT_WSR);
> > + regmap_write(imx2_wdt.regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ1);
> > + regmap_write(imx2_wdt.regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ2);
> > }
> >
> > static void imx2_wdt_timer_ping(unsigned long arg)
> > @@ -143,12 +146,8 @@ static void imx2_wdt_stop(void)
> >
> > static void imx2_wdt_set_timeout(int new_timeout)
> > {
> > - u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
> > -
> > - /* set the new timeout value in the WSR */
> > - val &= ~IMX2_WDT_WCR_WT;
> > - val |= WDOG_SEC_TO_COUNT(new_timeout);
> > - __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
> > + regmap_update_bits(imx2_wdt.regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT,
> > + WDOG_SEC_TO_COUNT(new_timeout));
> > }
> >
> > static int imx2_wdt_open(struct inode *inode, struct file *file)
> > @@ -181,7 +180,7 @@ static long imx2_wdt_ioctl(struct file *file, unsigned
> int cmd,
> > void __user *argp = (void __user *)arg;
> > int __user *p = argp;
> > int new_value;
> > - u16 val;
> > + u32 val;
> >
> > switch (cmd) {
> > case WDIOC_GETSUPPORT:
> > @@ -192,7 +191,7 @@ static long imx2_wdt_ioctl(struct file *file, unsigned
> int cmd,
> > return put_user(0, p);
> >
> > case WDIOC_GETBOOTSTATUS:
> > - val = __raw_readw(imx2_wdt.base + IMX2_WDT_WRSR);
> > + regmap_read(imx2_wdt.regmap, IMX2_WDT_WRSR, &val);
> > new_value = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0;
> > return put_user(new_value, p);
> >
> > @@ -255,15 +254,30 @@ static struct miscdevice imx2_wdt_miscdev = {
> > .fops = &imx2_wdt_fops,
> > };
> >
> > +static struct regmap_config imx2_wdt_regmap_config = {
> > + .reg_bits = 16,
> > + .reg_stride = 2,
> > + .val_bits = 16,
> > + .max_register = 0x8,
> > +};
> > +
> > static int __init imx2_wdt_probe(struct platform_device *pdev)
> > {
> > - int ret;
> > struct resource *res;
> > + void __iomem *base;
> > + int ret;
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > - imx2_wdt.base = devm_ioremap_resource(&pdev->dev, res);
> > - if (IS_ERR(imx2_wdt.base))
> > - return PTR_ERR(imx2_wdt.base);
> > + base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(base))
> > + return PTR_ERR(base);
> > +
> > + imx2_wdt.regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
> > + &imx2_wdt_regmap_config);
> > + if (IS_ERR(imx2_wdt.regmap)) {
> > + dev_err(&pdev->dev, "regmap init failed\n");
> > + return PTR_ERR(imx2_wdt.regmap);
> > + }
> >
> > imx2_wdt.clk = devm_clk_get(&pdev->dev, NULL);
> > if (IS_ERR(imx2_wdt.clk)) {
> > --
> > 1.8.4
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
