On 03/27/2014 07:21 PM, Punnaiah Choudary Kalluri wrote: > Add driver for arm pl353 static memory controller nand interface. > This controller is used in xilinx zynq soc for interfacing the nand > flash memory. > > Signed-off-by: Punnaiah Choudary Kalluri <punn...@xilinx.com> > --- > drivers/mtd/nand/Kconfig | 8 + > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/pl353_nand.c | 1122 > +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 1131 insertions(+), 0 deletions(-) > create mode 100644 drivers/mtd/nand/pl353_nand.c > > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig > index 90ff447..31c1d0c 100644 > --- a/drivers/mtd/nand/Kconfig > +++ b/drivers/mtd/nand/Kconfig > @@ -510,4 +510,12 @@ config MTD_NAND_XWAY > Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is > attached > to the External Bus Unit (EBU). > > +config MTD_NAND_PL353 > + tristate "ARM Pl353 NAND flash driver" > + depends on MTD_NAND && ARM > + select PL353_SMC
Here should be probably depends on PL353_SMC. I just found it. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
