Jeff Garzik wrote:: >Johannes Resch wrote: >> Hi, >> >> [please CC me on replies] >> >> I've got a box running 2.6.10 (with the patch[0] needed to support the >> Promise SATAII 150 TX4 controller). >> This box has three software raid1 partitions mirrored on a SATA disk on >> the Promise controller and a disk on the mainboard IDE controller (VIA >> vt8235). >> >> Within 4 days running the raid1, I got those three errors pasted below, >> each marking the SATA-raidmember as faulty. After "raidhotremove" and >> "raidhotadd" the SATA-raidmember syncs again fine and works at least a >> day until it is marked as faulty again. >> >> Any pointers where I could look at to resolve this problem? >> The SATA drive is a new Seagate ST3250823AS.
>I would change out your cables, and also make sure you are running >2.6.11-rc3-bk-latest, which includes all the SATAII patches and other fixes. I don't believe it has anything to do with cabling. 2.6.10-ac9 introduced some sata patches. I didn't check -ac9 and -ac10, but -ac11 and -ac12 are not usable on my box with exactly the same symptoms. -jo -- -rw-r--r-- 1 jo users 63 2005-02-12 18:43 /home/jo/.signature - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
