Brought to you with the help of sed and manual clean-up after.
$ sed -i -e 's|printk("\\n|dev_warn(dev->hw_dev,\n\t"|' \
addi-data/hwdrv_apci1500.c
Since all of these printk()s were for invalid API inputs and most of
them returned -EINVAL, I fixed the rest of them to return -EINVAL as
well.
Signed-off-by: Conrad Meyer <cse....@gmail.com>
---
.../comedi/drivers/addi-data/hwdrv_apci1500.c | 166 +++++++++++++--------
1 file changed, 107 insertions(+), 59 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index 2628ac4..0ccf784 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -242,56 +242,58 @@ static int i_APCI1500_ConfigDigitalInputEvent(struct
comedi_device *dev,
int i;
/*************************************************/
/* Selects the master interrupt control register */
/*************************************************/
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/**********************************************/
/* Disables the main interrupt on the board */
/**********************************************/
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
if (data[0] == 1) {
i_MaxChannel = 8;
} /* if (data[0] == 1) */
else {
if (data[0] == 2) {
i_MaxChannel = 6;
} /* if(data[0]==2) */
else {
- printk("\nThe specified port event does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified port event does not exist\n");
return -EINVAL;
} /* else if(data[0]==2) */
} /* else if (data[0] == 1) */
switch (data[1]) {
case 0:
data[1] = APCI1500_AND;
break;
case 1:
data[1] = APCI1500_OR;
break;
case 2:
data[1] = APCI1500_OR_PRIORITY;
break;
default:
- printk("\nThe specified interrupt logic does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified interrupt logic does not exist\n");
return -EINVAL;
} /* switch(data[1]); */
i_Logic = data[1];
for (i_Count = i_MaxChannel, i = 0; i_Count > 0; i_Count--, i++) {
i_EventMask = data[2 + i];
switch (i_EventMask) {
case 0:
i_PatternMask =
i_PatternMask | (1 << (i_MaxChannel - i_Count));
break;
case 1:
i_PatternMask =
i_PatternMask | (1 << (i_MaxChannel - i_Count));
i_PatternPolarity =
i_PatternPolarity | (1 << (i_MaxChannel -
i_Count));
break;
case 2:
i_PatternMask =
@@ -301,86 +303,83 @@ static int i_APCI1500_ConfigDigitalInputEvent(struct
comedi_device *dev,
i_Count));
break;
case 3:
i_PatternMask =
i_PatternMask | (1 << (i_MaxChannel - i_Count));
i_PatternPolarity =
i_PatternPolarity | (1 << (i_MaxChannel -
i_Count));
i_PatternTransition =
i_PatternTransition | (1 << (i_MaxChannel -
i_Count));
break;
case 4:
i_PatternTransition =
i_PatternTransition | (1 << (i_MaxChannel -
i_Count));
break;
case 5:
break;
default:
- printk("\nThe option indicated in the event mask does
not exist\n");
+ dev_warn(dev->hw_dev,
+ "The option indicated in the event mask does
not exist\n");
return -EINVAL;
} /* switch(i_EventMask) */
} /* for (i_Count = i_MaxChannel; i_Count
>0;i_Count --) */
if (data[0] == 1) {
/****************************/
/* Test the interrupt logic */
/****************************/
if (data[1] == APCI1500_AND ||
data[1] == APCI1500_OR ||
data[1] == APCI1500_OR_PRIORITY) {
/**************************************/
/* Tests if a transition was declared */
/* for a OR PRIORITY logic */
/**************************************/
if (data[1] == APCI1500_OR_PRIORITY
&& i_PatternTransition != 0) {
- /********************************************/
- /* Transition error on an OR PRIORITY logic */
- /********************************************/
- printk("\nTransition error on an OR PRIORITY
logic\n");
+ dev_warn(dev->hw_dev,
+ "Transition error on an OR PRIORITY
logic\n");
return -EINVAL;
} /* if (data[1]== APCI1500_OR_PRIORITY &&
i_PatternTransition != 0) */
/*************************************/
/* Tests if more than one transition */
/* was declared for an AND logic */
/*************************************/
if (data[1] == APCI1500_AND) {
for (i_Count = 0; i_Count < 8; i_Count++) {
i_PatternTransitionCount =
i_PatternTransitionCount +
((i_PatternTransition >>
i_Count) & 0x1);
} /* for (i_Count = 0; i_Count < 8;
i_Count++) */
if (i_PatternTransitionCount > 1) {
- /****************************************/
- /* Transition error on an AND logic
*/
- /****************************************/
- printk("\n Transition error on an AND
logic\n");
+ dev_warn(dev->hw_dev,
+ "Transition error on an AND
logic\n");
return -EINVAL;
} /* if (i_PatternTransitionCount > 1) */
} /* if (data[1]== APCI1500_AND) */
/*****************************************************************/
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL
register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/******************/
/* Disable Port A */
/******************/
outb(0xF0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/**********************************************/
/* Selects the polarity register of port 1 */
/**********************************************/
outb(APCI1500_RW_PORT_A_PATTERN_POLARITY,
@@ -440,41 +439,42 @@ static int i_APCI1500_ConfigDigitalInputEvent(struct
comedi_device *dev,
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1Status = 1;
/*****************************************************************/
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL
register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************/
/* Enable Port A */
/*****************/
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /*
if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY)
*/
else {
- printk("\nThe choice for interrupt logic does not
exist\n");
+ dev_warn(dev->hw_dev,
+ "The choice for interrupt logic does not
exist\n");
return -EINVAL;
} /* else }//
if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY)
*/
} /* if (data[0]== 1) */
/************************************/
/* Test if event setting for port 2 */
/************************************/
if (data[0] == 2) {
/************************/
/* Test the event logic */
/************************/
if (data[1] == APCI1500_OR) {
/*****************************************************************/
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL
register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
@@ -568,41 +568,42 @@ static int i_APCI1500_ConfigDigitalInputEvent(struct
comedi_device *dev,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2Status = 1;
/*****************************************************************/
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL
register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************/
/* Enable Port B */
/*****************/
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if (data[1] == APCI1500_OR) */
else {
- printk("\nThe choice for interrupt logic does not
exist\n");
+ dev_warn(dev->hw_dev,
+ "The choice for interrupt logic does not
exist\n");
return -EINVAL;
} /* elseif (data[1] == APCI1500_OR) */
} /* if(data[0]==2) */
return insn->n;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_StartStopInputEvent |
| (struct comedi_device *dev,struct comedi_subdevice
*s, |
| struct comedi_insn *insn,unsigned int *data)
|
+----------------------------------------------------------------------------+
| Task : Allows or disallows a port event |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle
|
| unsigned int ui_Channel : Channel number to read
|
| unsigned int *data : Data Pointer to read
status |
| data[0] :0 Start input event
| 1 Stop input event
@@ -674,41 +675,42 @@ static int i_APCI1500_StartStopInputEvent(struct
comedi_device *dev,
i_Event1InterruptStatus = 1;
outb(APCI1500_RW_PORT_A_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue =
inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master interrupt control
register */
/*************************************************/
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/**********************************************/
/* Authorizes the main interrupt on the
board */
/**********************************************/
outb(0xD0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if(i_Event1Status==1) */
else {
- printk("\nEvent 1 not initialised\n");
+ dev_warn(dev->hw_dev,
+ "Event 1 not initialised\n");
return -EINVAL;
} /* else if(i_Event1Status==1) */
} /* if (data[1]==1) */
if (data[1] == 2) {
if (i_Event2Status == 1) {
/*****************************************************************/
/* Selects the
APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/******************/
/* Disable Port B */
/******************/
outb(0x74,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***************************************************/
/* Selects the command and status
register of */
/* port 2
*/
/***************************************************/
@@ -725,47 +727,49 @@ static int i_APCI1500_StartStopInputEvent(struct
comedi_device *dev,
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************/
/* Enable Port B */
/*****************/
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master interrupt control
register */
/*************************************************/
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/**********************************************/
/* Authorizes the main interrupt on the
board */
/**********************************************/
outb(0xD0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 1;
} /* if(i_Event2Status==1) */
else {
- printk("\nEvent 2 not initialised\n");
+ dev_warn(dev->hw_dev,
+ "Event 2 not initialised\n");
return -EINVAL;
} /* else if(i_Event2Status==1) */
} /* if(data[1]==2) */
} /* if (data[1] == 1 || data[0] == 2) */
else {
- printk("\nThe port parameter is in error\n");
+ dev_warn(dev->hw_dev,
+ "The port parameter is in error\n");
return -EINVAL;
} /* else if (data[1] == 1 || data[0] == 2) */
break;
case STOP:
/*************************/
/* Tests the port number */
/*************************/
if (data[1] == 1 || data[1] == 2) {
/***************************/
/* Test if port 1 selected */
/***************************/
if (data[1] == 1) {
/*****************************/
/* Test if event initialised */
/*****************************/
if (i_Event1Status == 1) {
@@ -786,41 +790,42 @@ static int i_APCI1500_StartStopInputEvent(struct
comedi_device *dev,
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*************************************/
/* Inhibits the pattern interrupt
*/
/*************************************/
outb(0xE0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************************************************************/
/* Selects the
APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************/
/* Enable Port A */
/*****************/
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1InterruptStatus = 0;
} /* if(i_Event1Status==1) */
else {
- printk("\nEvent 1 not initialised\n");
+ dev_warn(dev->hw_dev,
+ "Event 1 not initialised\n");
return -EINVAL;
} /* else if(i_Event1Status==1) */
} /* if (data[1]==1) */
if (data[1] == 2) {
/*****************************/
/* Test if event initialised */
/*****************************/
if (i_Event2Status == 1) {
/*****************************************************************/
/* Selects the
APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/******************/
/* Disable Port B */
/******************/
outb(0x74,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***************************************************/
/* Selects the command and status
register of */
@@ -829,53 +834,56 @@ static int i_APCI1500_StartStopInputEvent(struct
comedi_device *dev,
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*************************************/
/* Inhibits the pattern interrupt
*/
/*************************************/
outb(0xE0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************************************************************/
/* Selects the
APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
/*****************************************************************/
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*****************/
/* Enable Port B */
/*****************/
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 0;
} /* if(i_Event2Status==1) */
else {
- printk("\nEvent 2 not initialised\n");
+ dev_warn(dev->hw_dev,
+ "Event 2 not initialised\n");
return -EINVAL;
} /* else if(i_Event2Status==1) */
} /* if(data[1]==2) */
} /* if (data[1] == 1 || data[1] == 2) */
else {
- printk("\nThe port parameter is in error\n");
+ dev_warn(dev->hw_dev,
+ "The port parameter is in error\n");
return -EINVAL;
} /* else if (data[1] == 1 || data[1] == 2) */
break;
default:
- printk("\nThe option of START/STOP logic does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The option of START/STOP logic does not exist\n");
return -EINVAL;
} /* switch(data[0]) */
return insn->n;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_Initialisation |
| (struct comedi_device *dev,struct comedi_subdevice
*s, |
| struct comedi_insn *insn,unsigned int *data)
|
+----------------------------------------------------------------------------+
| Task : Return the status of the digital input |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle
|
| unsigned int ui_Channel : Channel number to read
|
| unsigned int *data : Data Pointer to read
status |
+----------------------------------------------------------------------------+
| Output Parameters : --
|
+----------------------------------------------------------------------------+
@@ -1147,41 +1155,43 @@ static int i_APCI1500_WriteDigitalOutput(struct
comedi_device *dev,
data[0] =
(data[0] << (8 *
data[2])) | ui_Temp;
break;
case 15:
data[0] = data[0] | ui_Temp;
break;
default:
comedi_error(dev, " chan spec wrong");
return -EINVAL; /* "sorry channel spec
wrong " */
} /* switch(ui_NoOfChannels) */
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
} /* if(data[1]==1) */
else {
- printk("\nSpecified channel not supported\n");
+ dev_warn(dev->hw_dev,
+ "Specified channel not supported\n");
+ return -EINVAL;
} /* else if(data[1]==1) */
} /* elseif(data[1]==0) */
} /* if(data[3]==0) */
else {
if (data[3] == 1) {
if (data[1] == 0) {
data[0] = ~data[0] & 0x1;
ui_Temp1 = 1;
ui_Temp1 = ui_Temp1 << ui_NoOfChannel;
ui_Temp = ui_Temp | ui_Temp1;
data[0] =
(data[0] << ui_NoOfChannel) ^
0xffffffff;
data[0] = data[0] & ui_Temp;
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
} /* if(data[1]==0) */
else {
if (data[1] == 1) {
@@ -1224,46 +1234,49 @@ static int i_APCI1500_WriteDigitalOutput(struct
comedi_device *dev,
data
[2])) ^
0xffffffff) & ui_Temp;
break;
case 15:
break;
default:
comedi_error(dev,
" chan spec wrong");
return -EINVAL; /* "sorry
channel spec wrong " */
} /* switch(ui_NoOfChannels) */
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
} /* if(data[1]==1) */
else {
- printk("\nSpecified channel not
supported\n");
+ dev_warn(dev->hw_dev,
+ "Specified channel not
supported\n");
+ return -EINVAL;
} /* else if(data[1]==1) */
} /* elseif(data[1]==0) */
} /* if(data[3]==1); */
else {
- printk("\nSpecified functionality does not exist\n");
+ dev_warn(dev->hw_dev,
+ "Specified functionality does not exist\n");
return -EINVAL;
} /* if else data[3]==1) */
} /* if else data[3]==0) */
ui_Temp = data[0];
return insn->n;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ConfigCounterTimerWatchdog(comedi_device
| *dev,struct comedi_subdevice *s,struct comedi_insn
*insn,unsigned int *data)|
|
|
+----------------------------------------------------------------------------+
| Task : Configures The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle
|
| struct comedi_subdevice *s, :pointer to subdevice
structure
| struct comedi_insn *insn :pointer to insn
structure |
| unsigned int *data : Data Pointer to read status
data[0] :
2 APCI1500_1_8_KHZ
| 1 APCI1500_3_6_KHZ |
@@ -1301,70 +1314,73 @@ static int i_APCI1500_WriteDigitalOutput(struct
comedi_device *dev,
| : FALSE : Error occur. Return the error |
|
|
+----------------------------------------------------------------------------+
*/
static int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct addi_private *devpriv = dev->private;
int i_TimerCounterMode, i_MasterConfiguration;
devpriv->tsk_Current = current;
/* Selection of the input clock */
if (data[0] == 0 || data[0] == 1 || data[0] == 2) {
outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT);
} /* if(data[0]==0||data[0]==1||data[0]==2) */
else {
if (data[0] != 3) {
- printk("\nThe option for input clock selection does not
exist\n");
+ dev_warn(dev->hw_dev,
+ "The option for input clock selection does not
exist\n");
return -EINVAL;
} /* if(data[0]!=3) */
} /* elseif(data[0]==0||data[0]==1||data[0]==2) */
/* Select the counter/timer */
switch (data[1]) {
case COUNTER1:
/* selecting counter or timer */
switch (data[2]) {
case 0:
data[2] = APCI1500_COUNTER;
break;
case 1:
data[2] = APCI1500_TIMER;
break;
default:
- printk("\nThis choice is not a timer nor a counter\n");
+ dev_warn(dev->hw_dev,
+ "This choice is not a timer nor a counter\n");
return -EINVAL;
} /* switch(data[2]) */
/* Selecting single or continuous mode */
switch (data[4]) {
case 0:
data[4] = APCI1500_CONTINUOUS;
break;
case 1:
data[4] = APCI1500_SINGLE;
break;
default:
- printk("\nThis option for single/continuous mode does
not exist\n");
+ dev_warn(dev->hw_dev,
+ "This option for single/continuous mode does
not exist\n");
return -EINVAL;
} /* switch(data[4]) */
i_TimerCounterMode = data[2] | data[4] | 7;
/*************************/
/* Test the reload value */
/*************************/
if ((data[3] >= 0) && (data[3] <= 65535)) {
if (data[7] == APCI1500_ENABLE
|| data[7] == APCI1500_DISABLE) {
/************************************************/
/* Selects the mode register of timer/counter 1
*/
/************************************************/
outb(APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***********************/
/* Writes the new mode */
@@ -1457,101 +1473,107 @@ static int
i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device *dev,
outb(0x0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/****************************************/
/* Selects the commands register of */
/* timer/counter 1 */
/****************************************/
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***************************/
/* Trigger timer/counter 1 */
/***************************/
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if(data[7]== APCI1500_ENABLE ||data[7]==
APCI1500_DISABLE) */
else {
- printk("\nError in selection of interrupt
enable or disable\n");
+ dev_warn(dev->hw_dev,
+ "Error in selection of interrupt enable
or disable\n");
return -EINVAL;
} /* elseif(data[7]== APCI1500_ENABLE ||data[7]==
APCI1500_DISABLE) */
} /* if ((data[3]>= 0) && (data[3] <= 65535)) */
else {
- printk("\nError in selection of reload value\n");
+ dev_warn(dev->hw_dev,
+ "Error in selection of reload value\n");
return -EINVAL;
} /* else if ((data[3]>= 0) && (data[3] <=
65535)) */
i_TimerCounterWatchdogInterrupt = data[7];
i_TimerCounter1Init = 1;
break;
case COUNTER2: /* selecting counter or timer */
switch (data[2]) {
case 0:
data[2] = APCI1500_COUNTER;
break;
case 1:
data[2] = APCI1500_TIMER;
break;
default:
- printk("\nThis choice is not a timer nor a counter\n");
+ dev_warn(dev->hw_dev,
+ "This choice is not a timer nor a counter\n");
return -EINVAL;
} /* switch(data[2]) */
/* Selecting single or continuous mode */
switch (data[4]) {
case 0:
data[4] = APCI1500_CONTINUOUS;
break;
case 1:
data[4] = APCI1500_SINGLE;
break;
default:
- printk("\nThis option for single/continuous mode does
not exist\n");
+ dev_warn(dev->hw_dev,
+ "This option for single/continuous mode does
not exist\n");
return -EINVAL;
} /* switch(data[4]) */
/* Selecting software or hardware trigger */
switch (data[5]) {
case 0:
data[5] = APCI1500_SOFTWARE_TRIGGER;
break;
case 1:
data[5] = APCI1500_HARDWARE_TRIGGER;
break;
default:
- printk("\nThis choice for software or hardware trigger
does not exist\n");
+ dev_warn(dev->hw_dev,
+ "This choice for software or hardware trigger
does not exist\n");
return -EINVAL;
} /* switch(data[5]) */
/* Selecting software or hardware gate */
switch (data[6]) {
case 0:
data[6] = APCI1500_SOFTWARE_GATE;
break;
case 1:
data[6] = APCI1500_HARDWARE_GATE;
break;
default:
- printk("\nThis choice for software or hardware gate
does not exist\n");
+ dev_warn(dev->hw_dev,
+ "This choice for software or hardware gate does
not exist\n");
return -EINVAL;
} /* switch(data[6]) */
i_TimerCounterMode = data[2] | data[4] | data[5] | data[6] | 7;
/*************************/
/* Test the reload value */
/*************************/
if ((data[3] >= 0) && (data[3] <= 65535)) {
if (data[7] == APCI1500_ENABLE
|| data[7] == APCI1500_DISABLE) {
/************************************************/
/* Selects the mode register of timer/counter 2
*/
/************************************************/
outb(APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***********************/
@@ -1645,88 +1667,93 @@ static int i_APCI1500_ConfigCounterTimerWatchdog(struct
comedi_device *dev,
outb(0x0,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/****************************************/
/* Selects the commands register of */
/* timer/counter 2 */
/****************************************/
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***************************/
/* Trigger timer/counter 1 */
/***************************/
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if(data[7]== APCI1500_ENABLE ||data[7]==
APCI1500_DISABLE) */
else {
- printk("\nError in selection of interrupt
enable or disable\n");
+ dev_warn(dev->hw_dev,
+ "Error in selection of interrupt enable
or disable\n");
return -EINVAL;
} /* elseif(data[7]== APCI1500_ENABLE ||data[7]==
APCI1500_DISABLE) */
} /* if ((data[3]>= 0) && (data[3] <= 65535)) */
else {
- printk("\nError in selection of reload value\n");
+ dev_warn(dev->hw_dev,
+ "Error in selection of reload value\n");
return -EINVAL;
} /* else if ((data[3]>= 0) && (data[3] <=
65535)) */
i_TimerCounterWatchdogInterrupt = data[7];
i_TimerCounter2Init = 1;
break;
case COUNTER3: /* selecting counter or watchdog */
switch (data[2]) {
case 0:
data[2] = APCI1500_COUNTER;
break;
case 1:
data[2] = APCI1500_WATCHDOG;
break;
default:
- printk("\nThis choice is not a watchdog nor a
counter\n");
+ dev_warn(dev->hw_dev,
+ "This choice is not a watchdog nor a
counter\n");
return -EINVAL;
} /* switch(data[2]) */
/* Selecting single or continuous mode */
switch (data[4]) {
case 0:
data[4] = APCI1500_CONTINUOUS;
break;
case 1:
data[4] = APCI1500_SINGLE;
break;
default:
- printk("\nThis option for single/continuous mode does
not exist\n");
+ dev_warn(dev->hw_dev,
+ "This option for single/continuous mode does
not exist\n");
return -EINVAL;
} /* switch(data[4]) */
/* Selecting software or hardware gate */
switch (data[6]) {
case 0:
data[6] = APCI1500_SOFTWARE_GATE;
break;
case 1:
data[6] = APCI1500_HARDWARE_GATE;
break;
default:
- printk("\nThis choice for software or hardware gate
does not exist\n");
+ dev_warn(dev->hw_dev,
+ "This choice for software or hardware gate does
not exist\n");
return -EINVAL;
} /* switch(data[6]) */
/*****************************/
/* Test if used for watchdog */
/*****************************/
if (data[2] == APCI1500_WATCHDOG) {
/*****************************/
/* - Enables the output line */
/* - Enables retrigger */
/* - Pulses output */
/*****************************/
i_TimerCounterMode = data[2] | data[4] | 0x54;
} /* if (data[2] == APCI1500_WATCHDOG) */
else {
i_TimerCounterMode = data[2] | data[4] | data[6] | 7;
} /* elseif (data[2] == APCI1500_WATCHDOG) */
/*************************/
/* Test the reload value */
@@ -1840,54 +1867,58 @@ static int i_APCI1500_ConfigCounterTimerWatchdog(struct
comedi_device *dev,
/*************************************/
/* Selects the command register of */
/* watchdog/counter 3 */
/*************************************/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/*************************************************/
/* Trigger the watchdog/counter 3 and
starts it */
/*************************************************/
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* elseif(data[2]==APCI1500_COUNTER) */
} /* if(data[7]== APCI1500_ENABLE ||data[7]==
APCI1500_DISABLE) */
else {
- printk("\nError in selection of interrupt
enable or disable\n");
+ dev_warn(dev->hw_dev,
+ "Error in selection of interrupt enable
or disable\n");
return -EINVAL;
} /* elseif(data[7]== APCI1500_ENABLE ||data[7]==
APCI1500_DISABLE) */
} /* if ((data[3]>= 0) && (data[3] <= 65535)) */
else {
- printk("\nError in selection of reload value\n");
+ dev_warn(dev->hw_dev,
+ "Error in selection of reload value\n");
return -EINVAL;
} /* else if ((data[3]>= 0) && (data[3] <=
65535)) */
i_TimerCounterWatchdogInterrupt = data[7];
i_WatchdogCounter3Init = 1;
break;
default:
- printk("\nThe specified counter\timer option does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified counter/timer option does not exist\n");
+ return -EINVAL;
} /* switch(data[1]) */
i_CounterLogic = data[2];
return insn->n;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_apci1500_timer_watchdog
| (struct comedi_device *dev,struct
comedi_subdevice *s,
| struct comedi_insn *insn,unsigned int *data);
|
+----------------------------------------------------------------------------+
| Task : Start / Stop or trigger the timer counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle
|
| struct comedi_subdevice *s, :pointer to subdevice
structure
| struct comedi_insn *insn :pointer to insn
structure |
| unsigned int *data : Data Pointer to read status
|
| data[0] : 0 Counter1/Timer1
| 1 Counter2/Timer2
| 2 Counter3/Watchdog
@@ -1920,41 +1951,42 @@ static int i_apci1500_timer_watchdog(struct
comedi_device *dev,
i_CommandAndStatusValue = 0xC4; /*
Enable the interrupt */
} /*
if(i_TimerCounterWatchdogInterrupt==1) */
else {
i_CommandAndStatusValue = 0xE4; /*
disable the interrupt */
} /*
elseif(i_TimerCounterWatchdogInterrupt==1) */
/**************************/
/* Starts timer/counter 1 */
/**************************/
i_TimerCounter1Enabled = 1;
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_TimerCounter1Init==1) */
else {
- printk("\nCounter/Timer1 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Counter/Timer1 not configured\n");
return -EINVAL;
}
break;
case STOP:
/**************************/
/* Stop timer/counter 1 */
/**************************/
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x00,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_TimerCounter1Enabled = 0;
@@ -1971,77 +2003,80 @@ static int i_apci1500_timer_watchdog(struct
comedi_device *dev,
} /* if( i_TimerCounter1Enabled==1) */
else {
/***************/
/* Set Trigger */
/***************/
i_CommandAndStatusValue = 0x2;
} /* elseif(i_TimerCounter1Enabled==1) */
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_TimerCounter1Init==1) */
else {
- printk("\nCounter/Timer1 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Counter/Timer1 not configured\n");
return -EINVAL;
}
break;
default:
- printk("\nThe specified option for start/stop/trigger
does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified option for start/stop/trigger
does not exist\n");
return -EINVAL;
} /* switch(data[1]) */
break;
case COUNTER2:
switch (data[1]) {
case START:
if (i_TimerCounter2Init == 1) {
if (i_TimerCounterWatchdogInterrupt == 1) {
i_CommandAndStatusValue = 0xC4; /*
Enable the interrupt */
} /*
if(i_TimerCounterWatchdogInterrupt==1) */
else {
i_CommandAndStatusValue = 0xE4; /*
disable the interrupt */
} /*
elseif(i_TimerCounterWatchdogInterrupt==1) */
/**************************/
/* Starts timer/counter 2 */
/**************************/
i_TimerCounter2Enabled = 1;
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_TimerCounter2Init==1) */
else {
- printk("\nCounter/Timer2 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Counter/Timer2 not configured\n");
return -EINVAL;
}
break;
case STOP:
/**************************/
/* Stop timer/counter 2 */
/**************************/
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x00,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_TimerCounter2Enabled = 0;
@@ -2057,77 +2092,80 @@ static int i_apci1500_timer_watchdog(struct
comedi_device *dev,
} /* if( i_TimerCounter2Enabled==1) */
else {
/***************/
/* Set Trigger */
/***************/
i_CommandAndStatusValue = 0x2;
} /* elseif(i_TimerCounter2Enabled==1) */
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_TimerCounter2Init==1) */
else {
- printk("\nCounter/Timer2 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Counter/Timer2 not configured\n");
return -EINVAL;
}
break;
default:
- printk("\nThe specified option for start/stop/trigger
does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified option for start/stop/trigger
does not exist\n");
return -EINVAL;
} /* switch(data[1]) */
break;
case COUNTER3:
switch (data[1]) {
case START:
if (i_WatchdogCounter3Init == 1) {
if (i_TimerCounterWatchdogInterrupt == 1) {
i_CommandAndStatusValue = 0xC4; /*
Enable the interrupt */
} /*
if(i_TimerCounterWatchdogInterrupt==1) */
else {
i_CommandAndStatusValue = 0xE4; /*
disable the interrupt */
} /*
elseif(i_TimerCounterWatchdogInterrupt==1) */
/**************************/
/* Starts Watchdog/counter 3 */
/**************************/
i_WatchdogCounter3Enabled = 1;
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_WatchdogCounter3init==1) */
else {
- printk("\nWatchdog/Counter3 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Watchdog/Counter3 not configured\n");
return -EINVAL;
}
break;
case STOP:
/**************************/
/* Stop Watchdog/counter 3 */
/**************************/
/********************************************/
/* Selects the commands and status register */
/********************************************/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x00,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_WatchdogCounter3Enabled = 0;
@@ -2146,75 +2184,80 @@ static int i_apci1500_timer_watchdog(struct
comedi_device *dev,
} /* if(
i_WatchdogCounter3Enabled==1) */
else {
/***************/
/* Set Trigger */
/***************/
i_CommandAndStatusValue = 0x2;
} /*
elseif(i_WatchdogCounter3Enabled==1) */
/********************************************/
/* Selects the commands and status
register */
/********************************************/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_WatchdogCounter3Init==1) */
else {
- printk("\nCounter3 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Counter3 not configured\n");
return -EINVAL;
}
break;
case 1:
/* triggering Watchdog 3 */
if (i_WatchdogCounter3Init == 1) {
/********************************************/
/* Selects the commands and status
register */
/********************************************/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x6,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_WatchdogCounter3Init==1) */
else {
- printk("\nWatchdog 3 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Watchdog 3 not configured\n");
return -EINVAL;
}
break;
default:
- printk("\nWrong choice of watchdog/counter3\n");
+ dev_warn(dev->hw_dev,
+ "Wrong choice of watchdog/counter3\n");
return -EINVAL;
} /* switch(data[2]) */
break;
default:
- printk("\nThe specified option for start/stop/trigger
does not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified option for start/stop/trigger
does not exist\n");
return -EINVAL;
} /* switch(data[1]) */
break;
default:
- printk("\nThe specified choice for counter/watchdog/timer does
not exist\n");
+ dev_warn(dev->hw_dev,
+ "The specified choice for counter/watchdog/timer does
not exist\n");
return -EINVAL;
} /* switch(data[0]) */
return insn->n;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ReadCounterTimerWatchdog |
| (struct comedi_device *dev,struct comedi_subdevice
*s,struct comedi_insn *insn,
| unsigned int *data);
|
+----------------------------------------------------------------------------+
| Task : Read The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle
|
| struct comedi_subdevice *s, :pointer to subdevice
structure
| struct comedi_insn *insn :pointer to insn
structure |
| unsigned int *data : Data Pointer to read
status |
| data[0] : 0 Counter1/Timer1
| 1 Counter2/Timer2
| 2 Counter3/Watchdog
@@ -2266,41 +2309,42 @@ static int i_APCI1500_ReadCounterTimerWatchdog(struct
comedi_device *dev,
/***************************************/
/* Selects the counter register (high) */
/***************************************/
outb(APCI1500_R_CPT_TMR1_VALUE_HIGH,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] =
inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] = data[0] << 8;
data[0] = data[0] & 0xff00;
outb(APCI1500_R_CPT_TMR1_VALUE_LOW,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_TimerCounter1Init==1) */
else {
- printk("\nTimer/Counter1 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Timer/Counter1 not configured\n");
return -EINVAL;
} /* elseif( i_TimerCounter1Init==1) */
break;
case COUNTER2:
/* Read counter/timer2 */
if (i_TimerCounter2Init == 1) {
if (i_TimerCounter2Enabled == 1) {
/************************/
/* Set RCC and gate */
/************************/
i_CommandAndStatusValue = 0xC;
} /* if( i_TimerCounter2Init==1) */
else {
/***************/
/* Set RCC */
/***************/
i_CommandAndStatusValue = 0x8;
} /* elseif(i_TimerCounter2Init==1) */
@@ -2317,41 +2361,42 @@ static int i_APCI1500_ReadCounterTimerWatchdog(struct
comedi_device *dev,
/***************************************/
/* Selects the counter register (high) */
/***************************************/
outb(APCI1500_R_CPT_TMR2_VALUE_HIGH,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] =
inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] = data[0] << 8;
data[0] = data[0] & 0xff00;
outb(APCI1500_R_CPT_TMR2_VALUE_LOW,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_TimerCounter2Init==1) */
else {
- printk("\nTimer/Counter2 not configured\n");
+ dev_warn(dev->hw_dev,
+ "Timer/Counter2 not configured\n");
return -EINVAL;
} /* elseif( i_TimerCounter2Init==1) */
break;
case COUNTER3:
/* Read counter/watchdog2 */
if (i_WatchdogCounter3Init == 1) {
if (i_WatchdogCounter3Enabled == 1) {
/************************/
/* Set RCC and gate */
/************************/
i_CommandAndStatusValue = 0xC;
} /* if( i_TimerCounter2Init==1) */
else {
/***************/
/* Set RCC */
/***************/
i_CommandAndStatusValue = 0x8;
} /* elseif(i_WatchdogCounter3Init==1) */
@@ -2368,46 +2413,48 @@ static int i_APCI1500_ReadCounterTimerWatchdog(struct
comedi_device *dev,
/***************************************/
/* Selects the counter register (high) */
/***************************************/
outb(APCI1500_R_CPT_TMR3_VALUE_HIGH,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] =
inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] = data[0] << 8;
data[0] = data[0] & 0xff00;
outb(APCI1500_R_CPT_TMR3_VALUE_LOW,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} /* if( i_WatchdogCounter3Init==1) */
else {
- printk("\nWatchdogCounter3 not configured\n");
+ dev_warn(dev->hw_dev,
+ "WatchdogCounter3 not configured\n");
return -EINVAL;
} /* elseif( i_WatchdogCounter3Init==1) */
break;
default:
- printk("\nThe choice of timer/counter/watchdog does not
exist\n");
+ dev_warn(dev->hw_dev,
+ "The choice of timer/counter/watchdog does not
exist\n");
return -EINVAL;
} /* switch(data[0]) */
return insn->n;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ReadInterruptMask |
| (struct comedi_device *dev,struct comedi_subdevice
*s,struct comedi_insn *insn,
| unsigned int *data);
|
+----------------------------------------------------------------------------+
| Task : Read the interrupt mask |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle
|
| struct comedi_subdevice *s, :pointer to subdevice
structure
| struct comedi_insn *insn :pointer to insn
structure |
| unsigned int *data : Data Pointer to read
status |
@@ -2455,41 +2502,42 @@ static int i_APCI1500_ReadInterruptMask(struct
comedi_device *dev,
static int i_APCI1500_ConfigureInterrupt(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct addi_private *devpriv = dev->private;
unsigned int ui_Status;
int i_RegValue;
int i_Constant;
devpriv->tsk_Current = current;
outl(0x0, devpriv->i_IobaseAmcc + 0x38);
if (data[0] == 1) {
i_Constant = 0xC0;
} /* if(data[0]==1) */
else {
if (data[0] == 0) {
i_Constant = 0x00;
} /* if{data[0]==0) */
else {
- printk("\nThe parameter passed to driver is in error
for enabling the voltage interrupt\n");
+ dev_warn(dev->hw_dev,
+ "The parameter passed to driver is in error for
enabling the voltage interrupt\n");
return -EINVAL;
} /* else if(data[0]==0) */
} /* elseif(data[0]==1) */
/*****************************************************/
/* Selects the mode specification register of port B */
/*****************************************************/
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/*********************************************/
/* Writes the new configuration (APCI1500_OR) */
/*********************************************/
i_RegValue = (i_RegValue & 0xF9) | APCI1500_OR;
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/*****************************************************/
/* Selects the command and status register of port B */
@@ -2713,41 +2761,40 @@ static void v_APCI1500_Interrupt(int irq, void *d)
/* Selects the command and status register of port B */
/*****************************************************/
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue =
inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
if ((i_RegValue & 0x60) == 0x60) {
/*****************************************************/
/* Selects the command and status register of port B */
/*****************************************************/
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/***********************************/
/* Deletes the interrupt of port B */
/***********************************/
i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- printk("\n\n\n");
/****************/
/* Reads port B */
/****************/
i_RegValue =
inb((unsigned int) devpriv->iobase +
APCI1500_Z8536_PORT_B);
i_RegValue = i_RegValue & 0xC0;
/**************************************/
/* Tests if this is an external error */
/**************************************/
if (i_RegValue) {
/* Disable the interrupt */
/*****************************************************/
/* Selects the command and status register of
port B */
/*****************************************************/
outl(0x0, devpriv->i_IobaseAmcc + 0x38);
if (i_RegValue & 0x80) {
@@ -2840,41 +2887,42 @@ static void v_APCI1500_Interrupt(int irq, void *d)
i_InterruptMask = i_InterruptMask | 0x20;
}
} /* if ((i_RegValue & 0x60) == 0x60) */
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal
to the sample */
/***********************/
/* Enable all Interrupts */
/***********************/
/*************************************************/
/* Selects the master interrupt control register */
/*************************************************/
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/**********************************************/
/* Authorizes the main interrupt on the board */
/**********************************************/
outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
} /* if ((ui_InterruptStatus & 0x800000) ==
0x800000) */
else {
- printk("\nInterrupt from unknown source\n");
+ dev_warn(dev->hw_dev,
+ "Interrupt from unknown source\n");
} /* else if ((ui_InterruptStatus & 0x800000) ==
0x800000) */
return;
}
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_Reset(struct comedi_device *dev)
| |
+----------------------------------------------------------------------------+
| Task :resets all the registers |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev
+----------------------------------------------------------------------------+
| Output Parameters : --
|
+----------------------------------------------------------------------------+
| Return Value : |
|
|
+----------------------------------------------------------------------------+
*/
static int i_APCI1500_Reset(struct comedi_device *dev)
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
