From: Suravee Suthikulpanit <suravee.suthikulpa...@amd.com>
This patch doesn't have functional changes. List of changes including
* Refactoring the function early_fill_mp_bus_info into multiple helper
functions since it is getting long, and difficult to follow.
* Merge early_fill_mp_bus_info into amd_postcore_init since no need to have
this as a separate function.
* Use pr_xxx instead of printk
* Prepends the "AMD-Bus" for each print.
* The current code is using "fam10h_mmconf_*" in several place.
But this is not specific to family10h system. This patch changes
it to "amd_mmconf_*" instead for clarity.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpa...@amd.com>
Tested-by: Aravind Gopalakrishnan <aravind.gopalakrish...@amd.com>
---
arch/x86/pci/amd_bus.c | 250 ++++++++++++++++++++++++++----------------------
1 file changed, 136 insertions(+), 114 deletions(-)
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 577995e..8ce3bd5 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -35,8 +35,6 @@
static bool amd_early_ecs_enabled;
-static int __init pci_io_ecs_init(u8 bus, u8 slot);
-
/*
* This discovers the pcibus <-> node mapping on AMD K8.
* also get peer root bus resource for io,mmio
@@ -96,84 +94,49 @@ static void __init set_mp_bus_range_to_node(int min_bus,
int max_bus, int node)
#endif
}
-/**
- * early_fill_mp_bus_to_node()
- * called before pcibios_scan_root and pci_scan_bus
- * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
- * Registers found in the K8 northbridge
- */
-static int __init early_fill_mp_bus_info(void)
+static struct amd_hostbridge * __init probe_pci_hostbridge(void)
{
int i;
- unsigned bus;
- unsigned slot;
- int node;
- int link;
- int def_node;
- int def_link;
- struct pci_root_info *info;
- u32 reg;
- u64 start;
- u64 end;
- struct range range[RANGE_NUM];
- u64 val;
- u32 address;
- bool found;
- struct resource fam10h_mmconf_res, *fam10h_mmconf;
- u64 fam10h_mmconf_start;
- u64 fam10h_mmconf_end;
+ struct amd_hostbridge *hb = NULL;
- if (!early_pci_allowed())
- return -1;
-
- found = false;
for (i = 0; i < ARRAY_SIZE(hb_probes); i++) {
u32 id;
u16 device;
u16 vendor;
u32 class;
- bus = hb_probes[i].bus;
- slot = hb_probes[i].slot;
- id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
+ hb = &hb_probes[i];
+ id = read_pci_config(hb->bus, hb->slot, 0, PCI_VENDOR_ID);
vendor = id & 0xffff;
device = (id>>16) & 0xffff;
- class = read_pci_config(bus, slot, 0,
+ class = read_pci_config(hb->bus, hb->slot, 0,
PCI_CLASS_REVISION) >> 16;
if (PCI_VENDOR_ID_AMD == vendor) {
- if (hb_probes[i].device == device) {
- found = true;
+ if (hb->device == device)
break;
- }
- if ((hb_probes[i].device == PCI_ANY_ID) &&
+ if ((hb->device == PCI_ANY_ID) &&
(class == PCI_CLASS_BRIDGE_HOST)) {
- hb_probes[i].device = device;
- found = true;
+ hb->device = device;
break;
}
}
+ hb = NULL;
}
- if (!found) {
- printk(KERN_WARNING "AMD hostbridge not found\n");
- return 0;
- }
-
- printk(KERN_DEBUG "Found AMD hostbridge at %x:%x.0\n", bus, slot);
+ return hb;
+}
- /* We enabling ECS mode prior to probing MMIO since
- * the MMIO-related registers are in the ECS area.
- */
- pci_io_ecs_init(bus, slot);
+static int __init setup_pci_root_info(struct amd_hostbridge *hb)
+{
+ int i, min_bus, max_bus;
+ int node = 0, link = 0;
+ bool found = false;
- found = false;
for (i = 0; i < AMD_NB_F1_CONFIG_MAP_RANGES; i++) {
- int min_bus;
- int max_bus;
- reg = read_pci_config(bus, slot, 1,
- AMD_NB_F1_CONFIG_MAP_REG + (i << 2));
+ int offset = AMD_NB_F1_CONFIG_MAP_REG + (i << 2);
+ u32 reg = read_pci_config(hb->bus, hb->slot, 1, offset);
/* Check if that register is enabled for bus range */
if ((reg & 7) != 3)
@@ -186,7 +149,8 @@ static int __init early_fill_mp_bus_info(void)
set_mp_bus_range_to_node(min_bus, max_bus, node);
link = (reg >> 8) & 0x03;
- info = alloc_pci_root_info(min_bus, max_bus, node, link);
+ if (!alloc_pci_root_info(min_bus, max_bus, node, link))
+ return -ENOMEM;
}
if (!found) {
@@ -194,27 +158,33 @@ static int __init early_fill_mp_bus_info(void)
* we just use default to bus 0, node 0 link 0)
*/
set_mp_bus_range_to_node(0, 0, 0);
- info = alloc_pci_root_info(0, 0, 0, 0);
+ if (!alloc_pci_root_info(0, 0, 0, 0))
+ return -ENOMEM;
}
- /* get the default node and link for left over res */
- reg = read_pci_config(bus, slot, 0, AMD_NB_F0_NODE_ID);
- def_node = (reg >> 8) & 0x07;
- reg = read_pci_config(bus, slot, 0, AMD_NB_F0_UNIT_ID);
- def_link = (reg >> 8) & 0x03;
+ return 0;
+}
+
+static void __init probe_ioport_resource(struct amd_hostbridge *hb)
+{
+ int i, node, link;
+ u64 start, end;
+ u32 reg;
+ struct pci_root_info *info;
+ struct range range[RANGE_NUM];
memset(range, 0, sizeof(range));
add_range(range, RANGE_NUM, 0, 0, 0xffff + 1);
/* io port resource */
for (i = 0; i < AMD_NB_F1_IOPORT_RANGES; i++) {
- reg = read_pci_config(bus, slot, 1,
+ reg = read_pci_config(hb->bus, hb->slot, 1,
AMD_NB_F1_IO_BASEA_DDR_REG + (i << 3));
if (!(reg & 3))
continue;
start = reg & 0xfff000;
- reg = read_pci_config(bus, slot, 1,
+ reg = read_pci_config(hb->bus, hb->slot, 1,
AMD_NB_F1_IO_LIMIT_ADDR_REG + (i << 3));
node = reg & 0x07;
link = (reg >> 4) & 0x03;
@@ -224,8 +194,8 @@ static int __init early_fill_mp_bus_info(void)
if (!info)
continue; /* not found */
- printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
- node, link, start, end);
+ printk(KERN_DEBUG "AMD-Bus: index %d node %d link %d: io port
[%llx, %llx]\n",
+ i, node, link, start, end);
/* kernel only handle 16 bit only */
if (end > 0xffff)
@@ -236,7 +206,12 @@ static int __init early_fill_mp_bus_info(void)
/* add left over io port range to def node/link, [0, 0xffff] */
/* find the position */
- info = find_pci_root_info(def_node, def_link);
+
+ reg = read_pci_config(hb->bus, hb->slot, 0, AMD_NB_F0_NODE_ID);
+ node = (reg >> 8) & 0x07;
+ reg = read_pci_config(hb->bus, hb->slot, 0, AMD_NB_F0_UNIT_ID);
+ link = (reg >> 8) & 0x03;
+ info = find_pci_root_info(node, link);
if (info) {
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
@@ -246,8 +221,19 @@ static int __init early_fill_mp_bus_info(void)
IORESOURCE_IO, 1);
}
}
+}
+
+static void __init probe_mmio_resource(struct amd_hostbridge *hb)
+{
+ int i, node, link;
+ u32 address, reg;
+ u64 start, end, val, amd_mmconf_start, amd_mmconf_end;
+ struct pci_root_info *info;
+ struct resource amd_mmconf_res, *amd_mmconf;
+ struct range range[RANGE_NUM];
memset(range, 0, sizeof(range));
+
/* 0xfd00000000-0xffffffffff for HT */
end = cap_resource((0xfdULL<<32) - 1);
end++;
@@ -257,25 +243,25 @@ static int __init early_fill_mp_bus_info(void)
address = MSR_K8_TOP_MEM1;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
- printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20);
+ pr_info("AMD-Bus: TOM: %016llx aka %lldM\n", end, end>>20);
if (end < (1ULL<<32))
subtract_range(range, RANGE_NUM, 0, end);
/* get mmconfig */
- fam10h_mmconf = amd_get_mmconfig_range(&fam10h_mmconf_res);
+ amd_mmconf = amd_get_mmconfig_range(&amd_mmconf_res);
/* need to take out mmconf range */
- if (fam10h_mmconf) {
- printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf);
- fam10h_mmconf_start = fam10h_mmconf->start;
- fam10h_mmconf_end = fam10h_mmconf->end;
- subtract_range(range, RANGE_NUM, fam10h_mmconf_start,
- fam10h_mmconf_end + 1);
+ if (amd_mmconf) {
+ printk(KERN_DEBUG "AMD-Bus: mmconf %pR\n", amd_mmconf);
+ amd_mmconf_start = amd_mmconf->start;
+ amd_mmconf_end = amd_mmconf->end;
+ subtract_range(range, RANGE_NUM, amd_mmconf_start,
+ amd_mmconf_end + 1);
} else {
- fam10h_mmconf_start = 0;
- fam10h_mmconf_end = 0;
+ amd_mmconf_start = 0;
+ amd_mmconf_end = 0;
}
- /* mmio resource */
+ /* Probing mmio base/limit regs */
for (i = 0; i < AMD_NB_F1_MMIO_RANGES; i++) {
u64 tmp;
u32 base = AMD_NB_F1_MMIO_BASE_REG + (i << 3);
@@ -297,21 +283,21 @@ static int __init early_fill_mp_bus_info(void)
}
/* Base lo */
- reg = _amd_read_pci_config(bus, slot, 1, base);
+ reg = _amd_read_pci_config(hb->bus, hb->slot, 1, base);
if (!(reg & 3))
continue;
start = (reg & 0xffffff00UL) << 8; /* 39:16 on 31:8*/
/* Limit lo */
- reg = _amd_read_pci_config(bus, slot, 1, limit);
+ reg = _amd_read_pci_config(hb->bus, hb->slot, 1, limit);
node = reg & 0x07;
link = (reg >> 4) & 0x03;
end = (reg & 0xffffff00UL) << 8; /* 39:16 on 31:8*/
end |= 0xffffUL;
/* Base/Limit hi */
- tmp = _amd_read_pci_config(bus, slot, 1, base_limit_hi);
+ tmp = _amd_read_pci_config(hb->bus, hb->slot, 1, base_limit_hi);
start |= ((tmp & 0xffUL) << 40);
end |= ((tmp & (0xffUL << 16)) << 24);
@@ -319,36 +305,38 @@ static int __init early_fill_mp_bus_info(void)
if (!info)
continue;
- printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
- node, link, start, end);
+ printk(KERN_DEBUG "AMD-Bus: index %d node %d link %d: mmio
[%llx, %llx]",
+ i, node, link, start, end);
+
/*
* some sick allocation would have range overlap with fam10h
* mmconf range, so need to update start and end.
*/
- if (fam10h_mmconf_end) {
+ if (amd_mmconf_end) {
int changed = 0;
u64 endx = 0;
- if (start >= fam10h_mmconf_start &&
- start <= fam10h_mmconf_end) {
- start = fam10h_mmconf_end + 1;
+ if (start >= amd_mmconf_start &&
+ start <= amd_mmconf_end) {
+ start = amd_mmconf_end + 1;
changed = 1;
}
- if (end >= fam10h_mmconf_start &&
- end <= fam10h_mmconf_end) {
- end = fam10h_mmconf_start - 1;
+ if (end >= amd_mmconf_start &&
+ end <= amd_mmconf_end) {
+ end = amd_mmconf_start - 1;
changed = 1;
}
- if (start < fam10h_mmconf_start &&
- end > fam10h_mmconf_end) {
+ if (start < amd_mmconf_start &&
+ end > amd_mmconf_end) {
/* we got a hole */
- endx = fam10h_mmconf_start - 1;
- update_res(info, start, endx, IORESOURCE_MEM,
0);
+ endx = amd_mmconf_start - 1;
+ update_res(info, start, endx,
+ IORESOURCE_MEM, 0);
subtract_range(range, RANGE_NUM, start,
endx + 1);
printk(KERN_CONT " ==> [%llx, %llx]", start,
endx);
- start = fam10h_mmconf_end + 1;
+ start = amd_mmconf_end + 1;
changed = 1;
}
if (changed) {
@@ -377,7 +365,8 @@ static int __init early_fill_mp_bus_info(void)
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
- printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20);
+ pr_info("AMD-Bus: TOM2: %016llx aka %lldM\n",
+ end, end>>20);
subtract_range(range, RANGE_NUM, 1ULL<<32, end);
}
@@ -385,7 +374,11 @@ static int __init early_fill_mp_bus_info(void)
* add left over mmio range to def node/link ?
* that is tricky, just record range in from start_min to 4G
*/
- info = find_pci_root_info(def_node, def_link);
+ reg = read_pci_config(hb->bus, hb->slot, 0, AMD_NB_F0_NODE_ID);
+ node = (reg >> 8) & 0x07;
+ reg = read_pci_config(hb->bus, hb->slot, 0, AMD_NB_F0_UNIT_ID);
+ link = (reg >> 8) & 0x03;
+ info = find_pci_root_info(node, link);
if (info) {
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
@@ -396,20 +389,6 @@ static int __init early_fill_mp_bus_info(void)
IORESOURCE_MEM, 1);
}
}
-
- list_for_each_entry(info, &pci_root_infos, list) {
- int busnum;
- struct pci_root_res *root_res;
-
- busnum = info->busn.start;
- printk(KERN_DEBUG "bus: %pR on node %x link %x\n",
- &info->busn, info->node, info->link);
- list_for_each_entry(root_res, &info->resources, list)
- printk(KERN_DEBUG "bus: %02x %pR\n",
- busnum, &root_res->res);
- }
-
- return 0;
}
#define ENABLE_CF8_EXT_CFG (1ULL << 46)
@@ -475,7 +454,7 @@ static void __init pci_enable_pci_io_ecs(u8 bus, u8 slot)
#endif
}
-static int __init pci_io_ecs_init(u8 bus, u8 slot)
+static int __init pci_io_ecs_init(struct amd_hostbridge *hb)
{
int cpu;
@@ -483,7 +462,7 @@ static int __init pci_io_ecs_init(u8 bus, u8 slot)
if (boot_cpu_data.x86 < 0x10)
return 0;
- pci_enable_pci_io_ecs(bus, slot);
+ pci_enable_pci_io_ecs(hb->bus, hb->slot);
register_cpu_notifier(&amd_cpu_notifier);
for_each_online_cpu(cpu)
@@ -494,12 +473,55 @@ static int __init pci_io_ecs_init(u8 bus, u8 slot)
return 0;
}
+
+/**
+ * amd_postcore_init is called before pcibios_scan_root and pci_scan_bus.
+ */
static int __init amd_postcore_init(void)
{
+ struct pci_root_info *info;
+ struct amd_hostbridge *hb;
+
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
return 0;
- early_fill_mp_bus_info();
+ if (!early_pci_allowed())
+ return -1;
+
+ hb = probe_pci_hostbridge();
+ if (!hb) {
+ pr_warn("AMD-Bus: AMD hostbridge not found\n");
+ return -1;
+ }
+
+ printk(KERN_DEBUG "AMD-Bus: Found hostbridge %x:%x.0 (device ID =
%#x)\n",
+ hb->bus, hb->slot, hb->device);
+
+ /* We enabling ECS mode prior to probing MMIO since
+ * the MMIO-related registers are in the ECS area.
+ */
+ pci_io_ecs_init(hb);
+
+ if (setup_pci_root_info(hb) != 0) {
+ pr_warn("AMD-Bus: Failed to setup pci root info.\n");
+ return -1;
+ }
+
+ probe_ioport_resource(hb);
+
+ probe_mmio_resource(hb);
+
+ list_for_each_entry(info, &pci_root_infos, list) {
+ int busnum;
+ struct pci_root_res *root_res;
+
+ busnum = info->busn.start;
+ printk(KERN_DEBUG "AMD-Bus: bus: %pR on node %x link %x\n",
+ &info->busn, info->node, info->link);
+ list_for_each_entry(root_res, &info->resources, list)
+ printk(KERN_DEBUG "AMD-Bus: bus: %02x %pR\n",
+ busnum, &root_res->res);
+ }
return 0;
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
