From: Kyle McMartin <k...@redhat.com>
Having these optional is more trouble than is justified by the
negligible increase in code size to lib/xz/ if they're all compiled in.
Their optional status ends up necessitating rebuilds of the kernel
in order to be able to decompress XZ-compressed squashfs images which
use non-native BCJ filters (ie: you need to enable XZ_DEC_POWERPC on
x86_64 in order to loop-mount a ppc64 squashfs that uses it.)
So save ourselves the trouble and build them all into xz_dec_bcj.o to
begin with. (I could conceivably see a case where CONFIG_EXPERT made
these selectable, but again, even on embedded platforms, the .text
increase we're talking about is noise...)
text data bss dec hex filename
1239 0 0 1239 4d7 xz_dec_bcj.o
2263 0 0 2263 8d7 xz_dec_bcj.o.2
regards, Kyle
Signed-off-by: Kyle McMartin <k...@redhat.com>
--- a/lib/xz/Kconfig
+++ b/lib/xz/Kconfig
@@ -6,44 +6,6 @@ config XZ_DEC
the .xz file format as the container. For integrity checking,
CRC32 is supported. See Documentation/xz.txt for more information.
-if XZ_DEC
-
-config XZ_DEC_X86
- bool "x86 BCJ filter decoder"
- default y if X86
- select XZ_DEC_BCJ
-
-config XZ_DEC_POWERPC
- bool "PowerPC BCJ filter decoder"
- default y if PPC
- select XZ_DEC_BCJ
-
-config XZ_DEC_IA64
- bool "IA-64 BCJ filter decoder"
- default y if IA64
- select XZ_DEC_BCJ
-
-config XZ_DEC_ARM
- bool "ARM BCJ filter decoder"
- default y if ARM
- select XZ_DEC_BCJ
-
-config XZ_DEC_ARMTHUMB
- bool "ARM-Thumb BCJ filter decoder"
- default y if (ARM && ARM_THUMB)
- select XZ_DEC_BCJ
-
-config XZ_DEC_SPARC
- bool "SPARC BCJ filter decoder"
- default y if SPARC
- select XZ_DEC_BCJ
-
-endif
-
-config XZ_DEC_BCJ
- bool
- default n
-
config XZ_DEC_TEST
tristate "XZ decompressor tester"
default n
diff --git a/lib/xz/Makefile b/lib/xz/Makefile
index a7fa769..4f209f7 100644
--- a/lib/xz/Makefile
+++ b/lib/xz/Makefile
@@ -1,5 +1,4 @@
obj-$(CONFIG_XZ_DEC) += xz_dec.o
-xz_dec-y := xz_dec_syms.o xz_dec_stream.o xz_dec_lzma2.o
-xz_dec-$(CONFIG_XZ_DEC_BCJ) += xz_dec_bcj.o
+xz_dec-y := xz_dec_syms.o xz_dec_stream.o xz_dec_lzma2.o xz_dec_bcj.o
obj-$(CONFIG_XZ_DEC_TEST) += xz_dec_test.o
diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c
index a768e6d..e2ac55c 100644
--- a/lib/xz/xz_dec_bcj.c
+++ b/lib/xz/xz_dec_bcj.c
@@ -10,12 +10,6 @@
#include "xz_private.h"
-/*
- * The rest of the file is inside this ifdef. It makes things a little more
- * convenient when building without support for any BCJ filters.
- */
-#ifdef XZ_DEC_BCJ
-
struct xz_dec_bcj {
/* Type of the BCJ filter being used */
enum {
@@ -75,7 +69,6 @@ struct xz_dec_bcj {
} temp;
};
-#ifdef XZ_DEC_X86
/*
* This is used to test the most significant byte of a memory address
* in an x86 instruction.
@@ -154,9 +147,7 @@ static size_t bcj_x86(struct xz_dec_bcj *s, uint8_t *buf,
size_t size)
s->x86_prev_mask = prev_pos > 3 ? 0 : prev_mask << (prev_pos - 1);
return i;
}
-#endif
-#ifdef XZ_DEC_POWERPC
static size_t bcj_powerpc(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
@@ -175,9 +166,7 @@ static size_t bcj_powerpc(struct xz_dec_bcj *s, uint8_t
*buf, size_t size)
return i;
}
-#endif
-#ifdef XZ_DEC_IA64
static size_t bcj_ia64(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
static const uint8_t branch_table[32] = {
@@ -259,9 +248,7 @@ static size_t bcj_ia64(struct xz_dec_bcj *s, uint8_t *buf,
size_t size)
return i;
}
-#endif
-#ifdef XZ_DEC_ARM
static size_t bcj_arm(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
@@ -282,9 +269,7 @@ static size_t bcj_arm(struct xz_dec_bcj *s, uint8_t *buf,
size_t size)
return i;
}
-#endif
-#ifdef XZ_DEC_ARMTHUMB
static size_t bcj_armthumb(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
@@ -310,9 +295,7 @@ static size_t bcj_armthumb(struct xz_dec_bcj *s, uint8_t
*buf, size_t size)
return i;
}
-#endif
-#ifdef XZ_DEC_SPARC
static size_t bcj_sparc(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
@@ -332,7 +315,6 @@ static size_t bcj_sparc(struct xz_dec_bcj *s, uint8_t *buf,
size_t size)
return i;
}
-#endif
/*
* Apply the selected BCJ filter. Update *pos and s->pos to match the amount
@@ -351,36 +333,24 @@ static void bcj_apply(struct xz_dec_bcj *s,
size -= *pos;
switch (s->type) {
-#ifdef XZ_DEC_X86
case BCJ_X86:
filtered = bcj_x86(s, buf, size);
break;
-#endif
-#ifdef XZ_DEC_POWERPC
case BCJ_POWERPC:
filtered = bcj_powerpc(s, buf, size);
break;
-#endif
-#ifdef XZ_DEC_IA64
case BCJ_IA64:
filtered = bcj_ia64(s, buf, size);
break;
-#endif
-#ifdef XZ_DEC_ARM
case BCJ_ARM:
filtered = bcj_arm(s, buf, size);
break;
-#endif
-#ifdef XZ_DEC_ARMTHUMB
case BCJ_ARMTHUMB:
filtered = bcj_armthumb(s, buf, size);
break;
-#endif
-#ifdef XZ_DEC_SPARC
case BCJ_SPARC:
filtered = bcj_sparc(s, buf, size);
break;
-#endif
default:
/* Never reached but silence compiler warnings. */
filtered = 0;
@@ -536,24 +506,12 @@ XZ_EXTERN struct xz_dec_bcj *xz_dec_bcj_create(bool
single_call)
XZ_EXTERN enum xz_ret xz_dec_bcj_reset(struct xz_dec_bcj *s, uint8_t id)
{
switch (id) {
-#ifdef XZ_DEC_X86
case BCJ_X86:
-#endif
-#ifdef XZ_DEC_POWERPC
case BCJ_POWERPC:
-#endif
-#ifdef XZ_DEC_IA64
case BCJ_IA64:
-#endif
-#ifdef XZ_DEC_ARM
case BCJ_ARM:
-#endif
-#ifdef XZ_DEC_ARMTHUMB
case BCJ_ARMTHUMB:
-#endif
-#ifdef XZ_DEC_SPARC
case BCJ_SPARC:
-#endif
break;
default:
@@ -571,4 +529,3 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_reset(struct xz_dec_bcj
*s, uint8_t id)
return XZ_OK;
}
-#endif
diff --git a/lib/xz/xz_dec_stream.c b/lib/xz/xz_dec_stream.c
index ac809b1..a1ce0f7 100644
--- a/lib/xz/xz_dec_stream.c
+++ b/lib/xz/xz_dec_stream.c
@@ -130,10 +130,8 @@ struct xz_dec {
struct xz_dec_lzma2 *lzma2;
-#ifdef XZ_DEC_BCJ
struct xz_dec_bcj *bcj;
bool bcj_active;
-#endif
};
#ifdef XZ_DEC_ANY_CHECK
@@ -222,11 +220,9 @@ static enum xz_ret dec_block(struct xz_dec *s, struct
xz_buf *b)
s->in_start = b->in_pos;
s->out_start = b->out_pos;
-#ifdef XZ_DEC_BCJ
if (s->bcj_active)
ret = xz_dec_bcj_run(s->bcj, s->lzma2, b);
else
-#endif
ret = xz_dec_lzma2_run(s->lzma2, b);
s->block.compressed += b->in_pos - s->in_start;
@@ -465,11 +461,7 @@ static enum xz_ret dec_block_header(struct xz_dec *s)
* Catch unsupported Block Flags. We support only one or two filters
* in the chain, so we catch that with the same test.
*/
-#ifdef XZ_DEC_BCJ
if (s->temp.buf[1] & 0x3E)
-#else
- if (s->temp.buf[1] & 0x3F)
-#endif
return XZ_OPTIONS_ERROR;
/* Compressed Size */
@@ -494,7 +486,6 @@ static enum xz_ret dec_block_header(struct xz_dec *s)
s->block_header.uncompressed = VLI_UNKNOWN;
}
-#ifdef XZ_DEC_BCJ
/* If there are two filters, the first one must be a BCJ filter. */
s->bcj_active = s->temp.buf[1] & 0x01;
if (s->bcj_active) {
@@ -512,7 +503,6 @@ static enum xz_ret dec_block_header(struct xz_dec *s)
if (s->temp.buf[s->temp.pos++] != 0x00)
return XZ_OPTIONS_ERROR;
}
-#endif
/* Valid Filter Flags always take at least two bytes. */
if (s->temp.size - s->temp.pos < 2)
@@ -775,11 +765,9 @@ XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode,
uint32_t dict_max)
s->mode = mode;
-#ifdef XZ_DEC_BCJ
s->bcj = xz_dec_bcj_create(DEC_IS_SINGLE(mode));
if (s->bcj == NULL)
goto error_bcj;
-#endif
s->lzma2 = xz_dec_lzma2_create(mode, dict_max);
if (s->lzma2 == NULL)
@@ -789,10 +777,8 @@ XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode,
uint32_t dict_max)
return s;
error_lzma2:
-#ifdef XZ_DEC_BCJ
xz_dec_bcj_end(s->bcj);
error_bcj:
-#endif
kfree(s);
return NULL;
}
@@ -813,9 +799,7 @@ XZ_EXTERN void xz_dec_end(struct xz_dec *s)
{
if (s != NULL) {
xz_dec_lzma2_end(s->lzma2);
-#ifdef XZ_DEC_BCJ
xz_dec_bcj_end(s->bcj);
-#endif
kfree(s);
}
}
diff --git a/lib/xz/xz_private.h b/lib/xz/xz_private.h
index 482b90f..72334af 100644
--- a/lib/xz/xz_private.h
+++ b/lib/xz/xz_private.h
@@ -19,24 +19,6 @@
# include <linux/slab.h>
# include <linux/vmalloc.h>
# include <linux/string.h>
-# ifdef CONFIG_XZ_DEC_X86
-# define XZ_DEC_X86
-# endif
-# ifdef CONFIG_XZ_DEC_POWERPC
-# define XZ_DEC_POWERPC
-# endif
-# ifdef CONFIG_XZ_DEC_IA64
-# define XZ_DEC_IA64
-# endif
-# ifdef CONFIG_XZ_DEC_ARM
-# define XZ_DEC_ARM
-# endif
-# ifdef CONFIG_XZ_DEC_ARMTHUMB
-# define XZ_DEC_ARMTHUMB
-# endif
-# ifdef CONFIG_XZ_DEC_SPARC
-# define XZ_DEC_SPARC
-# endif
# define memeq(a, b, size) (memcmp(a, b, size) == 0)
# define memzero(buf, size) memset(buf, 0, size)
# endif
@@ -90,19 +72,6 @@
#endif
/*
- * If any of the BCJ filter decoders are wanted, define XZ_DEC_BCJ.
- * XZ_DEC_BCJ is used to enable generic support for BCJ decoders.
- */
-#ifndef XZ_DEC_BCJ
-# if defined(XZ_DEC_X86) || defined(XZ_DEC_POWERPC) \
- || defined(XZ_DEC_IA64) || defined(XZ_DEC_ARM) \
- || defined(XZ_DEC_ARM) || defined(XZ_DEC_ARMTHUMB) \
- || defined(XZ_DEC_SPARC)
-# define XZ_DEC_BCJ
-# endif
-#endif
-
-/*
* Allocate memory for LZMA2 decoder. xz_dec_lzma2_reset() must be used
* before calling xz_dec_lzma2_run().
*/
@@ -125,7 +94,6 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2
*s,
/* Free the memory allocated for the LZMA2 decoder. */
XZ_EXTERN void xz_dec_lzma2_end(struct xz_dec_lzma2 *s);
-#ifdef XZ_DEC_BCJ
/*
* Allocate memory for BCJ decoders. xz_dec_bcj_reset() must be used before
* calling xz_dec_bcj_run().
@@ -151,6 +119,5 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s,
/* Free the memory allocated for the BCJ filters. */
#define xz_dec_bcj_end(s) kfree(s)
-#endif
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
