Hi Magnus,
On Mon, Feb 24, 2014 at 9:44 AM, Magnus Damm <magnus.d...@gmail.com> wrote:
>>> Another question: How about "bus_num" and the platform device id
>>> mapping? I'd like them to be the same if possible, but you are having
>>> this "(idx+1)" bit in your code which I assume is to add offset for
>>> the QSPI bus.
>>
>> "bus_num" is the SPI-specific numbering of SPI masters, which is filled
>> in by spi-sh-msiof.c based on platform_device.id (i.e. the numeric suffix
>> of e.g. "spi_r8a7790_msiof.1").
>> It's used for matching SPI slaves in spi_board_info with SPI masters.
>> As QSPI ("qspi.0") has SPI bus_num 0, the MSIOF SPI masters use
>> bus_num 1 to 4, hence the "idx+1", and the platform device names
>> "spi_r8a7790_msiof.1" to "spi_r8a7790_msiof.4".
>>
>> (Can't spi-sh-msiof.c use "bus_num = pdev->id + 1", so we can have
>> MSIOF0 as "spi_r8a7790_msiof.0"? No, as that would impact numbering
>> on all SoCs with MSIOF.)
>
> Yeah, the bus number that is commonly used for SPI and I2C behaves
> like that so I agree with what you're saying. I guess historically we
> usually only have one I2C master and one SPI master which makes it
> easy to use direct mapping between bus num and pdev->id.
>
> Now on Lager we have multiple SPI masters (both QSPI and MSIOF unless
> I'm mistaken), so the question is how to allocate the ranges of
> bus_num for each SPI master. I believe your current allocation works
> well but I'm a bit confused by it I must confess.
>
> I'm used to one of the two schemes:
> 1) single master with pdev->id equals bus_num
> 2) compact board specific bus allocation
>
> I believe you introduce something similar to 1) but for two SPI
> masters which is totally fine! For some unknown reason I expected 2)
> with bus_num 0 for QSPI and bus_num 1 for MSIOF1, but I think your
> allocation scheme is reusable across multiple boards with the same SoC
> so I think your current code is better when I think about it a bit
> more.
On our specific boards, we now have a sparse SPI bus numbering,
but that's just because some MSIOF channels are not used. On other
boards with the same SoC that may be different.
> Right. I was just confused seeing the pdev->id set to 2 on MSIOF1, but
> I now understand that it is your intentional design to have bus_num 0
> as QSPI, bus_num1 as unused MSIOF0 and bus_num 2 as MSIOF1.
Actually that's too much credit for me: the bus numbering came from the
BSP through Yoshii-san.
> It just takes some time for me to grasp. =)
Yes, we're too used to having one single type of each hardware type :-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
