On 01/29/2014 05:46 PM, Nishanth Menon wrote:
> From: "Andrii.Tseglytskyi" <andrii.tseglyts...@ti.com>
>
> Add ABB device nodes for OMAP5 family of devices. Data is based on
> OMAP543x Technical Reference Manual revision U (April 2013).
> NOTE: clock node has been disabled in this patch due to the lack of
> OMAP5 clock data.
>
> [n...@ti.com: co-developer]
> Signed-off-by: Nishanth Menon <n...@ti.com>
> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglyts...@ti.com>
> ---
I have been informed that there is an fix in TI official documentation
which is due end of this month. So, I have to drop this patch from the
series for the time being - I will refresh this along with necessary
OMAP5 updates once the official documentation is available.
> arch/arm/boot/dts/omap5.dtsi | 63
> ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index a72813a..6159f20 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -801,6 +801,69 @@
>
> #thermal-sensor-cells = <1>;
> };
> +
> + abb_mpu: regulator-abb-mpu {
> + compatible = "ti,abb-v2";
> + regulator-name = "abb_mpu";
> + #address-cells = <0>;
> + #size-cells = <0>;
> + clocks = <&sys_clkin>;
> + ti,settling-time = <50>;
> + ti,clock-cycles = <16>;
> +
> + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
> + <0x4a0021ac 0x18>, <0x4ae0C318 0x4>;
> + reg-names = "base-address", "int-address",
> + "efuse-address", "ldo-address";
> + ti,tranxdone-status-mask = <0x80>;
> + /* LDOVBBMPU_MUX_CTRL */
> + ti,ldovbb-override-mask = <0x400>;
> + /* LDOVBBMPU_VSET_OUT */
> + ti,ldovbb-vset-mask = <0x1F>;
> +
> + /*
> + * NOTE: only FBB mode used but actual vset will
> + * determine final biasing
> + */
> + ti,abb_info = <
> + /*uV ABB efuse rbb_m fbb_m vset_m*/
> + 880000 0 0x4 0 0x20000000 0x1F000000
> + 1060000 0 0x8 0 0x20000000 0x1F000000
> + 1250000 0 0x10 0 0x20000000 0x1F000000
> + 1260000 1 0x14 0 0x20000000 0x1F000000
> + >;
> + };
> +
> + abb_mm: regulator-abb-mm {
> + compatible = "ti,abb-v2";
> + regulator-name = "abb_mm";
> + #address-cells = <0>;
> + #size-cells = <0>;
> + clocks = <&sys_clkin>;
> + ti,settling-time = <50>;
> + ti,clock-cycles = <16>;
> +
> + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
> + <0x4a002194 0x14>, <0x4ae0C314 0x4>;
> + reg-names = "base-address", "int-address",
> + "efuse-address", "ldo-address";
> + ti,tranxdone-status-mask = <0x80000000>;
> + /* LDOVBBMM_MUX_CTRL */
> + ti,ldovbb-override-mask = <0x400>;
> + /* LDOVBBMM_VSET_OUT */
> + ti,ldovbb-vset-mask = <0x1F>;
> +
> + /*
> + * NOTE: only FBB mode used but actual vset will
> + * determine final biasing
> + */
> + ti,abb_info = <
> + /*uV ABB efuse rbb_m fbb_m vset_m*/
> + 880000 0 0x4 0 0x20000000 0x1F000000
> + 1025000 0 0x8 0 0x20000000 0x1F000000
> + 1120000 1 0x10 0 0x20000000 0x1F000000
> + >;
> + };
> };
> };
>
>
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
