Hello,
I am having the same kind of troubles (can't tune and mt_set_frequency -121 errors) since 2.6.10 (it was working in 2.6.9) on amd64.
this patch did not help sadely.
log files attached if you have time to look at them :) (the non-working one being 2.6.11-rc3+your patch)
Cheers, Mik
Gerd Knorr wrote:
mt2032_set_if_freq failed with -121
OK here you go.
Thanks, seems to be a initialization order bug which changes the default state of the tda9887 output ports. The patch below should fix that.
Gerd
diff -u linux-2.6.11/drivers/media/video/tda9887.c linux/drivers/media/video/tda9887.c
--- linux-2.6.11/drivers/media/video/tda9887.c 2005-01-25 11:57:21.000000000 +0100
+++ linux/drivers/media/video/tda9887.c 2005-02-03 12:26:16.246003021 +0100
@@ -305,9 +305,9 @@
printk(" B5 force mute audio: %s\n",
(buf[1] & 0x20) ? "yes" : "no");
printk(" B6 output port 1 : %s\n",
- (buf[1] & 0x40) ? "high" : "low");
+ (buf[1] & 0x40) ? "high (inactive)" : "low (active)");
printk(" B7 output port 2 : %s\n",
- (buf[1] & 0x80) ? "high" : "low");
+ (buf[1] & 0x80) ? "high (inactive)" : "low (active)");
printk(PREFIX "write: byte C 0x%02x\n",buf[2]);
printk(" C0-4 top adjustment : %s dB\n", adjust[buf[2] & 0x1f]);
@@ -545,9 +545,9 @@
int rc;
memset(buf,0,sizeof(buf));
+ tda9887_set_tvnorm(t,buf);
buf[1] |= cOutputPort1Inactive;
buf[1] |= cOutputPort2Inactive;
- tda9887_set_tvnorm(t,buf);
if (UNSET != t->pinnacle_id) {
tda9887_set_pinnacle(t,buf);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
mt2032 spurcheck triggered: 2 mt2032_set_if_freq failed with -121 mt2032_set_if_freq2 failed with -121 mt2032_set_if_freq failed with -121 mt2032_set_if_freq2 failed with -121 bttv0: unloading bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 185 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 185, latency: 64, mmio: 0xf4b00000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init] tda9885/6/7: chip found @ 0x86 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no bttv0: using tuner=33 tda9885/6/7: Oops: no tvnorm entry found tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00 tda9885/6/7: write: byte B 0xc0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : high (inactive) tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x00 E0-1 sound carrier : 4.5 MHz E6 l pll ganting : 13 E2-4 video if : 58.75 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 . ok tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd4 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : high (inactive) tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd4 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : high (inactive) tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd4 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : high (inactive) tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: SECAM-L tda9885/6/7: writing: b=0x44 c=0x10 e=0x0b tda9885/6/7: write: byte B 0x44 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : low (active) tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x0b E0-1 sound carrier : 6.5 MHz / AM E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: SECAM-L tda9885/6/7: writing: b=0x44 c=0x10 e=0x0b tda9885/6/7: write: byte B 0x44 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : low (active) tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x0b E0-1 sound carrier : 6.5 MHz / AM E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tda9885/6/7: configure for: SECAM-L tda9885/6/7: writing: b=0x44 c=0x10 e=0x0b tda9885/6/7: write: byte B 0x44 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : low (active) tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x0b E0-1 sound carrier : 6.5 MHz / AM E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port
tuner: Ignoring new-style parameters in presence of obsolete ones tda9887: Ignoring new-style parameters in presence of obsolete ones bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 185 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 185, latency: 64, mmio: 0xf4b00000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init] tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw] tda9885/6/7: chip found @ 0x86 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no bttv0: using tuner=33 tda9885/6/7: Oops: no tvnorm entry found tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00 tda9885/6/7: write: byte B 0xc0 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : Intercarrier B3-4 tv sound/radio : AM/TV B5 force mute audio: no B6 output port 1 : high B7 output port 2 : high tda9885/6/7: write: byte C 0x10 C0-4 top adjustment : 0 dB C5-6 de-emphasis : no C7 audio gain : 0 tda9885/6/7: write: byte E 0x00 E0-1 sound carrier : 4.5 MHz E6 l pll ganting : 13 E2-4 video if : 58.75 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw] tuner: MT2032 hexdump: 24 27 ff 0f 1f f7 e4 8c c3 4e ec d4 0a 32 28 22 ff 4d 54 04 04 tuner: microtune: companycode=4d54 part=04 rev=04 mt2032: xogc = 0x07 mt2032: xok = 0x00 mt2032: xogc = 0x06 mt2032: xogc = 0x06 mt2032: xok = 0x00 mt2032: xogc = 0x05 mt2032: xogc = 0x05 mt2032: xok = 0x00 mt2032: xogc = 0x04 mt2032: xogc = 0x04 mt2032: xok = 0x00 mt2032: xogc = 0x03 tuner: microtune MT2032 found, OK bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 . ok
