On Mon, 2014-02-03 at 10:22 +0000, Lee Jones wrote:
> On Tue, 28 Jan 2014, Krzysztof Kozlowski wrote:
>
> > Add Maxim 77836 support to max14577 driver. The chipsets have same MUIC
> > component so the extcon, charger and regulators are almost the same. The
> > max77836 however has also PMIC and Fuel Gauge.
> >
> > The MAX77836 uses three I2C slave addresses and has additional interrupts
> > (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> > just like MAX77686 and MAX77693.
> >
> > The MAX77836 PMIC's TOPSYS and INTSRC interrupts are reported in the
> > PMIC block. The PMIC block has different I2C slave address and uses own
> > regmap so another regmap_irq_chip is needed.
> >
> > Since we have two regmap_irq_chip, use shared interrupts on MAX77836.
> >
> > This patch adds additional defines and functions to the max14577 MFD core
> > driver so the driver will handle both chipsets.
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
> > Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
> > Cc: Kyungmin Park <kyungmin.p...@samsung.com>
> > Cc: Marek Szyprowski <m.szyprow...@samsung.com>
> > ---
> > drivers/mfd/max14577.c | 215
> > ++++++++++++++++++++++++++++++++--
> > include/linux/mfd/max14577-private.h | 85 +++++++++++++-
> > include/linux/mfd/max14577.h | 7 +-
> > 3 files changed, 296 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
> > index 224aba8c5b3f..5b10f6f89834 100644
> > --- a/drivers/mfd/max14577.c
> > +++ b/drivers/mfd/max14577.c
> > @@ -1,7 +1,7 @@
> > /*
> > - * max14577.c - mfd core driver for the Maxim 14577
> > + * max14577.c - mfd core driver for the Maxim 14577/77836
>
> We may wish to consider changing the name of this file at a later
> date.
I agree, maybe "maxim-pmic.c"? The 14577 is a MUIC/charger, 77836 is a
MUIC/charger/mini-PMIC. However other max-like chipsets (77693, 77686)
have full PMIC capabilities, so the name change could be introduced when
support for these devices would be added.
> > - * Copyright (C) 2013 Samsung Electrnoics
> > + * Copyright (C) 2013,2014 Samsung Electrnoics
>
> You can remove the the '2013' completely now.
Shouldn't it contain the date of first publication?
> > * Chanwoo Choi <cw00.c...@samsung.com>
> > * Krzysztof Kozlowski <k.kozlow...@samsung.com>
> > *
> > @@ -37,11 +37,31 @@ static struct mfd_cell max14577_devs[] = {
> > { .name = "max14577-charger", },
> > };
> >
> > +static struct mfd_cell max77836_devs[] = {
> > + {
> > + .name = "max77836-muic",
> > + .of_compatible = "maxim,max77836-muic",
> > + },
> > + {
> > + .name = "max77836-regulator",
> > + .of_compatible = "maxim,max77836-regulator",
> > + },
> > + { .name = "max77836-charger", },
>
> Why doesn't the charger require a compatible string?
Currently the charger driver doesn't use DT and does not require it. The
device type is taken from parent's MFD of_compatible.
I'll add the compatible anyway because but during review of other
charger patch it was pointed that the charger should be configurable.
>
> > + {
> > + .name = "max77836-battery",
> > + .of_compatible = "maxim,max77836-battery",
> > + },
> > +};
> > +
> > @@ -56,6 +76,29 @@ static bool max14577_muic_volatile_reg(struct device
> > *dev, unsigned int reg)
> > return false;
> > }
> >
> > +static bool max77836_muic_volatile_reg(struct device *dev, unsigned int
> > reg)
> > +{
> > + /* Any max14577 volatile registers are also max77836 volatile. */
> > + if (max14577_muic_volatile_reg(dev, reg))
> > + return true;
>
> New line here please.
OK
>
> > + switch (reg) {
> > + case MAX77836_FG_REG_VCELL_MSB ... MAX77836_FG_REG_SOC_LSB:
> > + case MAX77836_FG_REG_CRATE_MSB ... MAX77836_FG_REG_CRATE_LSB:
> > + case MAX77836_FG_REG_STATUS_H ... MAX77836_FG_REG_STATUS_L:
> > + /* fall through */
>
> It's okay not to have these here. We know how switch statements
> work. ;)
Checkpatch complained about lack of this...
> > + case MAX77836_PMIC_REG_INTSRC:
> > + /* fall through */
> > + case MAX77836_PMIC_REG_TOPSYS_INT:
> > + /* fall through */
> > + case MAX77836_PMIC_REG_TOPSYS_STAT:
> > + return true;
> > + default:
> > + break;
> > + }
> > + return false;
> > +}
> > +
> > +
>
> Superfluous new line here.
OK
> > +static const struct regmap_irq_chip max77836_muic_irq_chip = {
> > + .name = "max77836-muic",
> > + .status_base = MAXIM_MUIC_REG_INT1,
> > + .mask_base = MAXIM_MUIC_REG_INTMASK1,
> > + .mask_invert = 1,
>
> I'd prefer the use of 'true' or 'false' for bools.
OK
> > + .num_regs = 3,
> > + .irqs = max77836_muic_irqs,
> > + .num_irqs = ARRAY_SIZE(max77836_muic_irqs),
> > +};
> > +
>
> <snip>
>
> > +static const struct regmap_irq_chip max77836_pmic_irq_chip = {
> > + .name = "max77836-pmic",
> > + .status_base = MAX77836_PMIC_REG_TOPSYS_INT,
> > + .mask_base = MAX77836_PMIC_REG_TOPSYS_INT_MASK,
> > + .mask_invert = 0,
>
> 'false' please.
OK
> > + .num_regs = 1,
> > + .irqs = max77836_pmic_irqs,
> > + .num_irqs = ARRAY_SIZE(max77836_pmic_irqs),
> > +};
> > +
>
> <snip>
>
> > +static int max77836_init(struct maxim_core *maxim_core)
> > +{
> > + int ret;
> > + u8 intsrc_mask;
> > +
> > + maxim_core->i2c_pmic = i2c_new_dummy(maxim_core->i2c->adapter,
> > + I2C_ADDR_PMIC);
> > + if (!maxim_core->i2c_pmic) {
> > + dev_err(maxim_core->dev, "Failed to register PMIC I2C
> > device\n");
> > + return -EPERM;
>
> Not sure this is the best errno to return.
>
> Perhaps -ENODEV would be more suitable?
Hmmm... I am not sure. The i2c_new_dummy() returns NULL when:
- kzalloc fails,
- I2C address is wrong (EINVAL),
- I2C device is busy,
- device_add fails.
For me none of them matches but I don't mind returning ENODEV.
> <snip>
>
> > #define MAXIM_STATUS2_CHGTYP_MASK (0x7 << MAXIM_STATUS2_CHGTYP_SHIFT)
> > #define MAXIM_STATUS2_CHGDETRUN_MASK (0x1 <<
> > MAXIM_STATUS2_CHGDETRUN_SHIFT)
> > #define MAXIM_STATUS2_DCDTMR_MASK (0x1 << MAXIM_STATUS2_DCDTMR_SHIFT)
> > #define MAXIM_STATUS2_DBCHG_MASK (0x1 << MAXIM_STATUS2_DBCHG_SHIFT)
> > #define MAXIM_STATUS2_VBVOLT_MASK (0x1 << MAXIM_STATUS2_VBVOLT_SHIFT)
> > +#define MAX77836_STATUS2_VIDRM_MASK (0x1 <<
> > MAX77836_STATUS2_VIDRM_SHIFT)
>
> It's up to you, but all of these "0x1 <<"s can be replaced with the
> BIT() macro if you so wished.
OK
>
> > /* MAX14577 STATUS3 register */
> > #define MAXIM_STATUS3_EOC_SHIFT 0
> > @@ -232,6 +242,70 @@ enum maxim_muic_charger_type {
> >
> >
> >
>
> Do all of these extra new lines really exist, or is it just a patch
> thing? If they do, can you get rid of them please?
Sure.
> > +/* Slave addr = 0x46: PMIC */
> > +enum max77836_pmic_reg {
> > + MAX77836_COMP_REG_COMP1 = 0x60,
> > +
> > + MAX77836_LDO_REG_CNFG1_LDO1 = 0x51,
> > + MAX77836_LDO_REG_CNFG2_LDO1 = 0x52,
> > + MAX77836_LDO_REG_CNFG1_LDO2 = 0x53,
> > + MAX77836_LDO_REG_CNFG2_LDO2 = 0x54,
> > + MAX77836_LDO_REG_CNFG_LDO_BIAS = 0x55,
> > +
> > + MAX77836_PMIC_REG_PMIC_ID = 0x20,
> > + MAX77836_PMIC_REG_PMIC_REV = 0x21,
> > + MAX77836_PMIC_REG_INTSRC = 0x22,
> > + MAX77836_PMIC_REG_INTSRC_MASK = 0x23,
> > + MAX77836_PMIC_REG_TOPSYS_INT = 0x24,
> > + MAX77836_PMIC_REG_TOPSYS_INT_MASK = 0x26,
> > + MAX77836_PMIC_REG_TOPSYS_STAT = 0x28,
> > + MAX77836_PMIC_REG_MRSTB_CNTL = 0x2A,
> > + MAX77836_PMIC_REG_LSCNFG = 0x2B,
> > +
> > + MAX77836_PMIC_REG_END,
> > +};
>
> Any reason why these aren't in numerical order?
I'll fix this.
>
> <snip>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
