Add support for configuring pins as output with value as from the
pinconf-generic interface.
Signed-off-by: Bjorn Andersson <bjorn.anders...@sonymobile.com>
---
drivers/pinctrl/pinctrl-msm.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
index ef2bf31..2cfb1d4 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -228,6 +228,11 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
*bit = g->drv_bit;
*mask = 7;
break;
+ case PIN_CONFIG_OUTPUT:
+ *reg = g->ctl_reg;
+ *bit = g->oe_bit;
+ *mask = 1;
+ break;
default:
dev_err(pctrl->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
@@ -301,6 +306,14 @@ static int msm_config_group_get(struct pinctrl_dev
*pctldev,
case PIN_CONFIG_DRIVE_STRENGTH:
arg = msm_regval_to_drive[arg];
break;
+ case PIN_CONFIG_OUTPUT:
+ /* Pin is not output */
+ if (!arg)
+ return -EINVAL;
+
+ val = readl(pctrl->regs + g->io_reg);
+ arg = !!(val & BIT(g->in_bit));
+ break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
param);
@@ -357,6 +370,20 @@ static int msm_config_group_set(struct pinctrl_dev
*pctldev,
else
arg = msm_drive_to_regval[arg];
break;
+ case PIN_CONFIG_OUTPUT:
+ /* set output value */
+ spin_lock_irqsave(&pctrl->lock, flags);
+ val = readl(pctrl->regs + g->io_reg);
+ if (arg)
+ val |= BIT(g->out_bit);
+ else
+ val &= ~BIT(g->out_bit);
+ writel(val, pctrl->regs + g->io_reg);
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ /* enable output */
+ arg = 1;
+ break;
default:
dev_err(pctrl->dev, "Unsupported config parameter:
%x\n",
param);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
