Thanks for reviewing. Sorry for make you misunderstanding, on our x86 platform, we want all the CPUs share one policy by setting CPUFREQ_SHARED_TYPE_ALL, not share one HW clock line. If the CPUs work at different frequency at init stage, then while the CPUs registering, no policy to align all the CPUs to the same frequency, this caused some conflicts with current CPUs P-state.
For example: CPU0: P0 CPU1: P14 CPU2: P14 CPU3: P14 During all the CPUs registering, kernel considers all the CPUs work at P0 state because of sharing CPU0 policy, but the other three CPUs really work at P14 state, all CPUs frequency only wait to be aligned until CPU0 state changed by governor based on shared policy. Best Regards Li zhuangzhi Android System Integration Shanghai Tel: +86 (0)21 6116 4323 -----Original Message----- From: Viresh Kumar [mailto:viresh.ku...@linaro.org] Sent: Tuesday, January 21, 2014 2:35 PM To: Li, Zhuangzhi Cc: Rafael J. Wysocki; cpuf...@vger.kernel.org; linux...@vger.kernel.org; Linux Kernel Mailing List; Liu, Chuansheng Subject: Re: [PATCH] cpufreq: Align all CPUs to the same frequency if using shared clock On 21 January 2014 08:35, lizhuangzhi <zhuangzhi...@intel.com> wrote: > Some SMP systems want to make all the possible CPUs share the clock, > if the CPUs init frequencies aren't the same, we need to align all the > CPUs to the same frequency while CPUs registing to avoid mismatched > CPU's P-states. > > Signed-off-by: lizhuangzhi <zhuangzhi...@intel.com> > --- > drivers/cpufreq/cpufreq.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c > index 8d19f7c..d00abb5 100644 > --- a/drivers/cpufreq/cpufreq.c > +++ b/drivers/cpufreq/cpufreq.c > @@ -991,6 +991,8 @@ static int __cpufreq_add_dev(struct device *dev, struct > subsys_interface *sif, > * CPU because it is in the same boat. */ > policy = cpufreq_cpu_get(cpu); > if (unlikely(policy)) { > + /* according present policy to align all the cpus frequencies > */ > + cpufreq_driver->target(policy, policy->cur, > + CPUFREQ_RELATION_H); I don't really understand why is this required? CPUs sharing clocks means that CPUs runs on the same clock line and so all of them must be running on same frequency. So, why do we need to call this routine? policy->cur must be the current freq here for CPU in question. -- viresh -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
