On 01/17, Bjorn Andersson wrote:
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
> new file mode 100644
> index 0000000..2e0020e
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -0,0 +1,894 @@
> +/* Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +/* QUP Registers */
> +#define QUP_CONFIG 0x000
> +#define QUP_STATE 0x004
> +#define QUP_IO_MODE 0x008
> +#define QUP_SW_RESET 0x00c
> +#define QUP_OPERATIONAL 0x018
> +#define QUP_ERROR_FLAGS 0x01c
> +#define QUP_ERROR_FLAGS_EN 0x020
> +#define QUP_HW_VERSION 0x030
> +#define QUP_MX_OUTPUT_CNT 0x100
> +#define QUP_OUT_FIFO_BASE 0x110
> +#define QUP_MX_WRITE_CNT 0x150
> +#define QUP_MX_INPUT_CNT 0x200
> +#define QUP_MX_READ_CNT 0x208
> +#define QUP_IN_FIFO_BASE 0x218
> +#define QUP_I2C_CLK_CTL 0x400
> +#define QUP_I2C_STATUS 0x404
> +
> +/* QUP States and reset values */
> +#define QUP_RESET_STATE 0
> +#define QUP_RUN_STATE 1
> +#define QUP_PAUSE_STATE 3
> +#define QUP_STATE_MASK 3
> +
> +#define QUP_STATE_VALID BIT(2)
> +#define QUP_I2C_MAST_GEN BIT(4)
> +
> +#define QUP_OPERATIONAL_RESET 0x000ff0
> +#define QUP_I2C_STATUS_RESET 0xfffffc
> +
> +/* QUP OPERATIONAL FLAGS */
> +#define QUP_OUT_SVC_FLAG BIT(8)
> +#define QUP_IN_SVC_FLAG BIT(9)
> +#define QUP_MX_INPUT_DONE BIT(11)
> +
> +/* I2C mini core related values */
> +#define I2C_MINI_CORE (2 << 8)
> +#define I2C_N_VAL 15
> +/* Most significant word offset in FIFO port */
> +#define QUP_MSW_SHIFT (I2C_N_VAL + 1)
> +#define QUP_CLOCK_AUTO_GATE BIT(13)
> +
> +/* Packing/Unpacking words in FIFOs, and IO modes */
> +#define QUP_UNPACK_EN BIT(14)
> +#define QUP_PACK_EN BIT(15)
> +#define QUP_OUTPUT_BLK_MODE BIT(10)
> +#define QUP_INPUT_BLK_MODE BIT(12)
> +
> +#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN)
> +
> +#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) & (0x03 << 0)) >> 0)
> +#define QUP_OUTPUT_FIFO_SIZE(x) (((x) & (0x07 << 2)) >> 2)
> +#define QUP_INPUT_BLOCK_SIZE(x) (((x) & (0x03 << 5)) >> 5)
> +#define QUP_INPUT_FIFO_SIZE(x) (((x) & (0x07 << 7)) >> 7)
> +
> +/* QUP tags */
> +#define QUP_OUT_NOP (0 << 8)
> +#define QUP_OUT_START (1 << 8)
> +#define QUP_OUT_DATA (2 << 8)
> +#define QUP_OUT_STOP (3 << 8)
> +#define QUP_OUT_REC (4 << 8)
> +#define QUP_IN_DATA (5 << 8)
> +#define QUP_IN_STOP (6 << 8)
> +#define QUP_IN_NACK (7 << 8)
> +
> +/* Status, Error flags */
> +#define I2C_STATUS_WR_BUFFER_FULL BIT(0)
> +#define I2C_STATUS_BUS_ACTIVE BIT(8)
> +#define I2C_STATUS_BUS_MASTER BIT(9)
> +#define I2C_STATUS_ERROR_MASK 0x38000fc
> +#define QUP_I2C_NACK_FLAG BIT(3)
> +#define QUP_IN_NOT_EMPTY BIT(5)
> +#define QUP_STATUS_ERROR_FLAGS 0x7c
> +
> +/* Master bus_err clock states */
> +#define I2C_CLK_RESET_BUSIDLE_STATE 0
> +#define I2C_CLK_FORCED_LOW_STATE 5
> +
> +#define QUP_MAX_CLK_STATE_RETRIES 300
> +#define QUP_MAX_QUP_STATE_RETRIES 100
> +#define I2C_STATUS_CLK_STATE 13
> +#define QUP_OUT_FIFO_NOT_EMPTY 0x10
> +#define QUP_READ_LIMIT 256
> +
> +struct qup_i2c_dev {
> + struct device *dev;
> + void __iomem *base;
> + int irq;
> + struct clk *clk;
> + struct clk *pclk;
> + struct i2c_adapter adap;
> +
> + int clk_ctl;
> + int one_bit_t;
> + int out_fifo_sz;
> + int in_fifo_sz;
> + int out_blk_sz;
> + int in_blk_sz;
> + unsigned long xfer_time;
> + unsigned long wait_idle;
> +
> + struct i2c_msg *msg;
> + /* Current posion in user message buffer */
s/posion/position/
> + int pos;
> + /* Keep number of bytes left to be transmitted */
> + int cnt;
> + /* I2C protocol errors */
> + u32 bus_err;
> + /* QUP core errors */
> + u32 qup_err;
> + /*
> + * Maximum bytes that could be send (per iteration). Could be
> + * equal of fifo size or block size (in block mode)
> + */
> + int chunk_sz;
> + struct completion xfer;
> +};
[...]
> +
> +static int
> +qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state, bool only_valid)
> +{
> + int retries = 0;
> + u32 state;
> +
> + do {
> + state = readl(qup->base + QUP_STATE);
> +
> + /*
> + * If only valid bit needs to be checked, requested state is
> + * 'don't care'
> + */
> + if (state & QUP_STATE_VALID) {
> + if (only_valid)
> + return 0;
> + if ((req_state & QUP_I2C_MAST_GEN)
> + && (state & QUP_I2C_MAST_GEN))
> + return 0;
> + if ((state & QUP_STATE_MASK) == req_state)
> + return 0;
> + }
> +
> + udelay(1);
> + } while (retries++ != QUP_MAX_QUP_STATE_RETRIES);
> +
> + return -ETIMEDOUT;
> +}
> +
This is what I was suggesting. Don't know if it's any clearer,
but it saves us a whopping 3 lines!
---8<----
drivers/i2c/busses/i2c-qup.c | 43 ++++++++++++++++++++-----------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 2e0020e829ae..431de13f6281 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -47,7 +47,7 @@
#define QUP_STATE_MASK 3
#define QUP_STATE_VALID BIT(2)
-#define QUP_I2C_MAST_GEN BIT(4)
+#define QUP_I2C_MAST_GEN (QUP_STATE_VALID | BIT(4))
#define QUP_OPERATIONAL_RESET 0x000ff0
#define QUP_I2C_STATUS_RESET 0xfffffc
@@ -190,43 +190,40 @@ done:
return IRQ_HANDLED;
}
-static int
-qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state, bool only_valid)
+static int __qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 mask, u32 value)
{
int retries = 0;
u32 state;
do {
state = readl(qup->base + QUP_STATE);
-
- /*
- * If only valid bit needs to be checked, requested state is
- * 'don't care'
- */
- if (state & QUP_STATE_VALID) {
- if (only_valid)
- return 0;
- if ((req_state & QUP_I2C_MAST_GEN)
- && (state & QUP_I2C_MAST_GEN))
- return 0;
- if ((state & QUP_STATE_MASK) == req_state)
- return 0;
- }
-
+ if ((state & mask) == value)
+ return 0;
udelay(1);
} while (retries++ != QUP_MAX_QUP_STATE_RETRIES);
return -ETIMEDOUT;
}
+static int qup_i2c_poll_state_bit(struct qup_i2c_dev *qup, u32 mask)
+{
+ return __qup_i2c_poll_state(qup, mask, mask);
+}
+
+static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 state)
+{
+ return __qup_i2c_poll_state(qup, QUP_STATE_VALID | QUP_STATE_MASK,
+ QUP_STATE_VALID | state);
+}
+
static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
{
- if (qup_i2c_poll_state(qup, 0, true) != 0)
+ if (qup_i2c_poll_state_bit(qup, QUP_STATE_VALID) != 0)
return -EIO;
writel(state, qup->base + QUP_STATE);
- if (qup_i2c_poll_state(qup, state, false) != 0)
+ if (qup_i2c_poll_state(qup, state) != 0)
return -EIO;
return 0;
}
@@ -616,7 +613,7 @@ qup_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg
msgs[], int num)
goto out;
writel(1, qup->base + QUP_SW_RESET);
- ret = qup_i2c_poll_state(qup, QUP_RESET_STATE, false);
+ ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
if (ret) {
dev_err(qup->dev, "cannot goto reset state\n");
goto out;
@@ -633,7 +630,7 @@ qup_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg
msgs[], int num)
writel(0, qup->base + QUP_I2C_CLK_CTL);
writel(QUP_I2C_STATUS_RESET, qup->base + QUP_I2C_STATUS);
- if (qup_i2c_poll_state(qup, QUP_I2C_MAST_GEN, false) != 0) {
+ if (qup_i2c_poll_state_bit(qup, QUP_I2C_MAST_GEN) != 0) {
ret = -EIO;
goto out;
}
@@ -730,7 +727,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
* so we reset the core before registering for interrupts.
*/
writel(1, qup->base + QUP_SW_RESET);
- ret = qup_i2c_poll_state(qup, 0, true);
+ ret = qup_i2c_poll_state(qup, QUP_STATE_VALID);
if (ret)
goto fail;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
