On Thursday 02 January 2014 18:49:23 Florian Meier wrote:
> Add support for DMA controller of BCM2835 as used in the Raspberry Pi.
> Currently it only supports cyclic DMA.

Looks very nice. Just a few details I noticed:

> +#if defined(CONFIG_OF)
> +static const struct of_device_id bcm2835_dma_of_match[] = {
> +     { .compatible = "brcm,bcm2835-dma", },
> +     {},
> +};
> +MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
> +#endif

I doubt we are going to see non-DT versions of this driver, so the #ifdef
can just get removed here.

> +static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec,
> +                                        struct of_dma *ofdma)
> +{
> +     struct bcm2835_dmadev *d = ofdma->of_dma_data;
> +     struct dma_chan *chan, *candidate;
> +
> +retry:
> +     candidate = NULL;
> +
> +     /*
> +      * Walk the list of channels registered with the current instance and
> +      * find one that is currently unused.
> +      */
> +     list_for_each_entry(chan, &d->ddev.channels, device_node)
> +             if (chan->client_count == 0) {
> +                     candidate = chan;
> +                     break;
> +             }
> +
> +     if (!candidate)
> +             return NULL;
> +
> +     /*
> +      * dma_get_slave_channel will return NULL if we lost a race between
> +      * the lookup and the reservation.
> +      */
> +     chan = dma_get_slave_channel(candidate);
> +
> +     if (!chan)
> +             goto retry;
> +
> +     /* Set DREQ from param */
> +     to_bcm2835_dma_chan(chan)->dreq = spec->args[0];
> +
> +     return chan;
> +}

This can now be simplified using the dma_get_any_slave_channel() interface
taht Stephen Warren introduced.

> +
> +     if (!pdev->dev.dma_mask)
> +             pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> +
> +     rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
> +     if (rc)
> +             return rc;
> +     dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));

dma_set_mask_and_coherent()

> +     if (pdev->dev.of_node) {
> +             /* Device-tree DMA controller registration */
> +             rc = of_dma_controller_register(pdev->dev.of_node,
> +                             bcm2835_dma_xlate, od);
> +             if (rc) {
> +                     dev_err(&pdev->dev, "Failed to register DMA 
> controller\n");
> +                     goto err_no_dma;
> +             }
> +     }

If pdev->dev.of_node isn't set, you didn't get here, so the if() can be removed.

        Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to