3.11.10.2 -stable review patch. If anyone has any objections, please let me know.
------------------ From: Marc Kleine-Budde <[email protected]> commit 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 upstream. The flexcan IP core uses the peripheral clock ("per") as basic clock for the bit timing calculation. However the driver uses the the wrong clock ("ipg"). This leads to wrong bit rates if the rates on both clock are different. This patch fixes the problem by using the correct clock for the bit rate calculation. Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Luis Henriques <[email protected]> --- drivers/net/can/flexcan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index cf3c93f..eb6b191 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1010,7 +1010,6 @@ static int flexcan_probe(struct platform_device *pdev) err = PTR_ERR(clk_ipg); goto failed_clock; } - clock_freq = clk_get_rate(clk_ipg); clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(clk_per)) { @@ -1018,6 +1017,7 @@ static int flexcan_probe(struct platform_device *pdev) err = PTR_ERR(clk_per); goto failed_clock; } + clock_freq = clk_get_rate(clk_per); } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
