- [DVB] dib3000: driver refactoring, makes it easier to support device clones
Signed-off-by: Michael Hunold <[EMAIL PROTECTED]>
Signed-off-by: Johannes Stezenbach <[EMAIL PROTECTED]>
diff -uraNwB linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000-common.c
linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000-common.c
--- linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000-common.c
2005-01-20 19:54:04.000000000 +0100
+++ linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000-common.c
2005-01-20 19:56:37.000000000 +0100
@@ -2,7 +2,7 @@
#ifdef CONFIG_DVB_DIBCOM_DEBUG
static int debug;
-module_param(debug, int, 0x644);
+module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c,4=srch (|-able)).");
#endif
#define deb_info(args...) dprintk(0x01,args)
@@ -42,65 +41,6 @@
return i2c_transfer(state->i2c,msg, 1) != 1 ? -EREMOTEIO : 0;
}
-int dib3000_init_pid_list(struct dib3000_state *state, int num)
-{
- int i;
- if (state != NULL) {
- state->pid_list = kmalloc(sizeof(struct dib3000_pid) *
num,GFP_KERNEL);
- if (state->pid_list == NULL)
- return -ENOMEM;
-
- deb_info("initializing %d pids for the pid_list.\n",num);
- spin_lock_init(&state->pid_list_lock);
- memset(state->pid_list,0,num*(sizeof(struct dib3000_pid)));
- for (i=0; i < num; i++) {
- state->pid_list[i].pid = 0;
- state->pid_list[i].active = 0;
- }
- state->feedcount = 0;
- } else
- return -EINVAL;
-
- return 0;
-}
-
-void dib3000_dealloc_pid_list(struct dib3000_state *state)
-{
- if (state != NULL && state->pid_list != NULL)
- kfree(state->pid_list);
-}
-
-/* fetch a pid from pid_list */
-int dib3000_get_pid_index(struct dib3000_pid pid_list[], int num_pids, int pid,
- spinlock_t *pid_list_lock,int onoff)
-{
- int i,ret = -1;
- unsigned long flags;
-
- spin_lock_irqsave(pid_list_lock,flags);
- for (i=0; i < num_pids; i++)
- if (onoff) {
- if (!pid_list[i].active) {
- pid_list[i].pid = pid;
- pid_list[i].active = 1;
- ret = i;
- break;
- }
- } else {
- if (pid_list[i].active && pid_list[i].pid == pid) {
- pid_list[i].pid = 0;
- pid_list[i].active = 0;
- ret = i;
- break;
- }
- }
-
- deb_info("setting pid: %5d %04x at index %d '%s'\n",pid,pid,ret,onoff ?
"on" : "off");
-
- spin_unlock_irqrestore(pid_list_lock,flags);
- return ret;
-}
-
int dib3000_search_status(u16 irq,u16 lock)
{
if (irq & 0x02) {
@@ -139,7 +79,4 @@
EXPORT_SYMBOL(dib3000_read_reg);
EXPORT_SYMBOL(dib3000_write_reg);
-EXPORT_SYMBOL(dib3000_init_pid_list);
-EXPORT_SYMBOL(dib3000_dealloc_pid_list);
-EXPORT_SYMBOL(dib3000_get_pid_index);
EXPORT_SYMBOL(dib3000_search_status);
diff -uraNwB linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000-common.h
linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000-common.h
--- linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000-common.h
2005-01-20 19:55:47.000000000 +0100
+++ linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000-common.h
2005-01-20 19:56:37.000000000 +0100
@@ -4,7 +4,7 @@
*
* DiBcom (http://www.dibcom.fr/)
*
- * Copyright (C) 2004 Patrick Boettcher ([EMAIL PROTECTED])
+ * Copyright (C) 2004-5 Patrick Boettcher ([EMAIL PROTECTED])
*
* based on GPL code from DibCom, which has
*
@@ -29,19 +28,10 @@
#include "dvb_frontend.h"
#include "dib3000.h"
-/* info and err, taken from usb.h, if there is anything available like by
default,
- * please change !
- */
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ##
arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ ,
## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__
, ## arg)
-
-/* a PID for the pid_filter list, when in use */
-struct dib3000_pid
-{
- u16 pid;
- int active;
-};
+/* info and err, taken from usb.h, if there is anything available like by
default. */
+#define err(format, arg...) printk(KERN_ERR "dib3000mX: " format "\n" , ## arg)
+#define info(format, arg...) printk(KERN_INFO "dib3000mX: " format "\n" , ##
arg)
+#define warn(format, arg...) printk(KERN_WARNING "dib3000mX: " format "\n" ,
## arg)
/* frontend state */
struct dib3000_state {
@@ -52,25 +42,18 @@
/* configuration settings */
struct dib3000_config config;
- spinlock_t pid_list_lock;
- struct dib3000_pid *pid_list;
-
- int feedcount;
-
struct dvb_frontend frontend;
int timing_offset;
int timing_offset_comp_done;
+
+ fe_bandwidth_t last_tuned_bw;
+ u32 last_tuned_freq;
};
/* commonly used methods by the dib3000mb/mc/p frontend */
extern int dib3000_read_reg(struct dib3000_state *state, u16 reg);
extern int dib3000_write_reg(struct dib3000_state *state, u16 reg, u16 val);
-extern int dib3000_init_pid_list(struct dib3000_state *state, int num);
-extern void dib3000_dealloc_pid_list(struct dib3000_state *state);
-extern int dib3000_get_pid_index(struct dib3000_pid pid_list[], int num_pids,
- int pid, spinlock_t *pid_list_lock,int onoff);
-
extern int dib3000_search_status(u16 irq,u16 lock);
/* handy shortcuts */
@@ -81,7 +64,7 @@
#define wr_foreach(a,v) { int i; \
if (sizeof(a) != sizeof(v)) \
- err("sizeof: %zd %zd is different",sizeof(a),sizeof(v));\
+ err("sizeof: %d %d is different",sizeof(a),sizeof(v));\
for (i=0; i < sizeof(a)/sizeof(u16); i++) \
wr(a[i],v[i]); \
}
@@ -136,8 +119,8 @@
#define DIB3000_DDS_INVERSION_OFF ( 0)
#define DIB3000_DDS_INVERSION_ON ( 1)
-#define DIB3000_TUNER_WRITE_ENABLE(a) (0xffff & (a << 7))
-#define DIB3000_TUNER_WRITE_DISABLE(a) (0xffff & ((a << 7) | (1 << 7)))
+#define DIB3000_TUNER_WRITE_ENABLE(a) (0xffff & (a << 8))
+#define DIB3000_TUNER_WRITE_DISABLE(a) (0xffff & ((a << 8) | (1 << 7)))
/* for auto search */
extern u16 dib3000_seq[2][2][2];
diff -uraNwB linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000.h
linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000.h
--- linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000.h 2005-01-20
19:54:04.000000000 +0100
+++ linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000.h 2005-01-20
19:56:37.000000000 +0100
@@ -2,7 +2,7 @@
* public header file of the frontend drivers for mobile DVB-T demodulators
* DiBcom 3000-MB and DiBcom 3000-MC/P (http://www.dibcom.fr/)
*
- * Copyright (C) 2004 Patrick Boettcher ([EMAIL PROTECTED])
+ * Copyright (C) 2004-5 Patrick Boettcher ([EMAIL PROTECTED])
*
* based on GPL code from DibCom, which has
*
@@ -31,25 +31,24 @@
/* the demodulator's i2c address */
u8 demod_address;
- /* The i2c address of the PLL */
- u8 pll_addr;
-
- /* PLL maintenance */
- int (*pll_init)(struct dvb_frontend *fe);
- int (*pll_set)(struct dvb_frontend *fe, struct dvb_frontend_parameters*
params);
+ /* PLL maintenance and the i2c address of the PLL */
+ u8 (*pll_addr)(struct dvb_frontend *fe);
+ int (*pll_init)(struct dvb_frontend *fe, u8 pll_buf[5]);
+ int (*pll_set)(struct dvb_frontend *fe, struct dvb_frontend_parameters*
params, u8 pll_buf[5]);
};
-struct dib3000_xfer_ops
+struct dib_fe_xfer_ops
{
/* pid and transfer handling is done in the demodulator */
int (*pid_parse)(struct dvb_frontend *fe, int onoff);
int (*fifo_ctrl)(struct dvb_frontend *fe, int onoff);
- int (*pid_ctrl)(struct dvb_frontend *fe, int pid, int onoff);
+ int (*pid_ctrl)(struct dvb_frontend *fe, int index, int pid, int onoff);
+ int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
};
extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config*
config,
- struct i2c_adapter* i2c, struct
dib3000_xfer_ops *xfer_ops);
+ struct i2c_adapter* i2c, struct
dib_fe_xfer_ops *xfer_ops);
extern struct dvb_frontend* dib3000mc_attach(const struct dib3000_config*
config,
- struct i2c_adapter* i2c, struct
dib3000_xfer_ops *xfer_ops);
+ struct i2c_adapter* i2c, struct
dib_fe_xfer_ops *xfer_ops);
#endif // DIB3000_H
diff -uraNwB linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000mb.c
linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000mb.c
--- linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000mb.c 2005-01-20
19:54:04.000000000 +0100
+++ linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000mb.c
2005-01-20 19:56:37.000000000 +0100
@@ -2,7 +2,7 @@
* Frontend driver for mobile DVB-T demodulator DiBcom 3000-MB
* DiBcom (http://www.dibcom.fr/)
*
- * Copyright (C) 2004 Patrick Boettcher ([EMAIL PROTECTED])
+ * Copyright (C) 2004-5 Patrick Boettcher ([EMAIL PROTECTED])
*
* based on GPL code from DibCom, which has
*
@@ -29,7 +28,6 @@
#include <linux/init.h>
#include <linux/delay.h>
-#include "dvb_frontend.h"
#include "dib3000-common.h"
#include "dib3000mb_priv.h"
#include "dib3000.h"
@@ -41,7 +39,7 @@
#ifdef CONFIG_DVB_DIBCOM_DEBUG
static int debug;
-module_param(debug, int, 0x644);
+module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe
(|-able)).");
#endif
#define deb_info(args...) dprintk(0x01,args)
@@ -49,6 +47,8 @@
#define deb_setf(args...) dprintk(0x04,args)
#define deb_getf(args...) dprintk(0x08,args)
+static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8
pll_addr);
+
static int dib3000mb_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep);
@@ -61,11 +61,9 @@
int search_state,seq;
if (tuner) {
- wr(DIB3000MB_REG_TUNER,
-
DIB3000_TUNER_WRITE_ENABLE(state->config.pll_addr));
- state->config.pll_set(fe, fep);
- wr(DIB3000MB_REG_TUNER,
-
DIB3000_TUNER_WRITE_DISABLE(state->config.pll_addr));
+ dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
+ state->config.pll_set(fe, fep, NULL);
+ dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
deb_setf("bandwidth: ");
switch (ofdm->bandwidth) {
@@ -390,11 +388,9 @@
wr(DIB3000MB_REG_DATA_IN_DIVERSITY,DIB3000MB_DATA_DIVERSITY_IN_OFF);
if (state->config.pll_init) {
- wr(DIB3000MB_REG_TUNER,
- DIB3000_TUNER_WRITE_ENABLE(state->config.pll_addr));
- state->config.pll_init(fe);
- wr(DIB3000MB_REG_TUNER,
- DIB3000_TUNER_WRITE_DISABLE(state->config.pll_addr));
+ dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
+ state->config.pll_init(fe,NULL);
+ dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
}
return 0;
@@ -414,6 +410,7 @@
return 0;
dds_val = ((rd(DIB3000MB_REG_DDS_VALUE_MSB) & 0xff) << 16) +
rd(DIB3000MB_REG_DDS_VALUE_LSB);
+ deb_getf("DDS_VAL: %x %x %x",dds_val, rd(DIB3000MB_REG_DDS_VALUE_MSB),
rd(DIB3000MB_REG_DDS_VALUE_LSB));
if (dds_val < threshold)
inv_test1 = 0;
else if (dds_val == threshold)
@@ -422,6 +419,7 @@
inv_test1 = 2;
dds_val = ((rd(DIB3000MB_REG_DDS_FREQ_MSB) & 0xff) << 16) +
rd(DIB3000MB_REG_DDS_FREQ_LSB);
+ deb_getf("DDS_FREQ: %x %x %x",dds_val, rd(DIB3000MB_REG_DDS_FREQ_MSB),
rd(DIB3000MB_REG_DDS_FREQ_LSB));
if (dds_val < threshold)
inv_test2 = 0;
else if (dds_val == threshold)
@@ -714,18 +712,11 @@
}
/* pid filter and transfer stuff */
-static int dib3000mb_pid_control(struct dvb_frontend *fe,int pid,int onoff)
+static int dib3000mb_pid_control(struct dvb_frontend *fe,int index, int
pid,int onoff)
{
struct dib3000_state *state = fe->demodulator_priv;
- int index = dib3000_get_pid_index(state->pid_list, DIB3000MB_NUM_PIDS,
pid, &state->pid_list_lock,onoff);
pid = (onoff ? pid | DIB3000_ACTIVATE_PID_FILTERING : 0);
-
- if (index >= 0) {
wr(index+DIB3000MB_REG_FIRST_PID,pid);
- } else {
- err("no more pids for filtering.");
- return -ENOMEM;
- }
return 0;
}
@@ -749,10 +740,21 @@
return 0;
}
+static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8
pll_addr)
+{
+ struct dib3000_state *state = (struct dib3000_state*)
fe->demodulator_priv;
+ if (onoff) {
+ wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
+ } else {
+ wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_DISABLE(pll_addr));
+ }
+ return 0;
+}
+
static struct dvb_frontend_ops dib3000mb_ops;
struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
- struct i2c_adapter* i2c, struct
dib3000_xfer_ops *xfer_ops)
+ struct i2c_adapter* i2c, struct
dib_fe_xfer_ops *xfer_ops)
{
struct dib3000_state* state = NULL;
@@ -773,9 +775,6 @@
if (rd(DIB3000_REG_DEVICE_ID) != DIB3000MB_DEVICE_ID)
goto error;
- if (dib3000_init_pid_list(state,DIB3000MB_NUM_PIDS))
- goto error;
-
/* create dvb_frontend */
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
@@ -784,6 +783,7 @@
xfer_ops->pid_parse = dib3000mb_pid_parse;
xfer_ops->fifo_ctrl = dib3000mb_fifo_control;
xfer_ops->pid_ctrl = dib3000mb_pid_control;
+ xfer_ops->tuner_pass_ctrl = dib3000mb_tuner_pass_ctrl;
return &state->frontend;
@@ -807,6 +807,7 @@
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_RECOVER |
FE_CAN_HIERARCHY_AUTO,
},
diff -uraNwB linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000mc.c
linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000mc.c
--- linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000mc.c 2005-01-20
19:54:04.000000000 +0100
+++ linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000mc.c
2005-01-20 19:56:38.000000000 +0100
@@ -2,9 +2,9 @@
* Frontend driver for mobile DVB-T demodulator DiBcom 3000-MC/P
* DiBcom (http://www.dibcom.fr/)
*
- * Copyright (C) 2004 Patrick Boettcher ([EMAIL PROTECTED])
+ * Copyright (C) 2004-5 Patrick Boettcher ([EMAIL PROTECTED])
*
- * based on GPL code from DibCom, which has
+ * based on GPL code from DiBCom, which has
*
* Copyright (C) 2004 Amaury Demol for DiBcom ([EMAIL PROTECTED])
*
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/delay.h>
-#include "dvb_frontend.h"
#include "dib3000-common.h"
#include "dib3000mc_priv.h"
#include "dib3000.h"
@@ -40,14 +39,16 @@
#ifdef CONFIG_DVB_DIBCOM_DEBUG
static int debug;
-module_param(debug, int, 0x644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe
(|-able)).");
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level
(1=info,2=xfer,4=setfe,8=getfe,16=stat (|-able)).");
#endif
#define deb_info(args...) dprintk(0x01,args)
#define deb_xfer(args...) dprintk(0x02,args)
#define deb_setf(args...) dprintk(0x04,args)
#define deb_getf(args...) dprintk(0x08,args)
+#define deb_stat(args...) dprintk(0x10,args)
+static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8
pll_addr);
static int dib3000mc_set_impulse_noise(struct dib3000_state * state, int mode,
fe_transmit_mode_t transmission_mode, fe_bandwidth_t bandwidth)
@@ -185,46 +186,33 @@
return 0;
}
-static int dib3000mc_get_frontend(struct dvb_frontend* fe,
- struct dvb_frontend_parameters *fep);
+static int dib3000mc_set_adp_cfg(struct dib3000_state *state, fe_modulation_t
con)
+{
+ switch (con) {
+ case QAM_64:
+ wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[2]);
+ break;
+ case QAM_16:
+ wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[1]);
+ break;
+ case QPSK:
+ wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[0]);
+ break;
+ case QAM_AUTO:
+ break;
+ default:
+ warn("unkown constellation.");
+ break;
+ }
+ return 0;
+}
-static int dib3000mc_set_frontend(struct dvb_frontend* fe,
- struct dvb_frontend_parameters *fep, int
tuner)
+static int dib3000mc_set_general_cfg(struct dib3000_state *state, struct
dvb_frontend_parameters *fep, int *auto_val)
{
- struct dib3000_state* state = (struct dib3000_state*)
fe->demodulator_priv;
struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
fe_code_rate_t fe_cr = FEC_NONE;
- int search_state, seq;
- u16 val;
u8 fft=0, guard=0, qam=0, alpha=0, sel_hp=0, cr=0, hrch=0;
-
- if (tuner) {
- wr(DIB3000MC_REG_TUNER,
-
DIB3000_TUNER_WRITE_ENABLE(state->config.pll_addr));
- state->config.pll_set(fe, fep);
- wr(DIB3000MC_REG_TUNER,
-
DIB3000_TUNER_WRITE_DISABLE(state->config.pll_addr));
- }
-
- dib3000mc_set_timing(state,0,ofdm->transmission_mode,ofdm->bandwidth);
- dib3000mc_init_auto_scan(state, ofdm->bandwidth, 0);
-
- wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_AGC);
- wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_OFF);
-
-/* Default cfg isi offset adp */
- wr_foreach(dib3000mc_reg_offset,dib3000mc_offset[0]);
-
- wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT | DIB3000MC_ISI_INHIBIT);
- wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[1]);
- wr(DIB3000MC_REG_UNK_133,DIB3000MC_UNK_133);
-
- wr_foreach(dib3000mc_reg_bandwidth_general,dib3000mc_bandwidth_general);
- if (ofdm->bandwidth == BANDWIDTH_8_MHZ) {
- wr_foreach(dib3000mc_reg_bw,dib3000mc_bw[3]);
- } else {
- wr_foreach(dib3000mc_reg_bw,dib3000mc_bw[0]);
- }
+ int seq;
switch (ofdm->transmission_mode) {
case TRANSMISSION_MODE_2K: fft = DIB3000_TRANSMISSION_MODE_2K;
break;
@@ -282,8 +270,7 @@
case INVERSION_OFF:
wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_OFF);
break;
- case INVERSION_AUTO:
- break;
+ case INVERSION_AUTO: /* fall through */
case INVERSION_ON:
wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_ON);
break;
@@ -298,168 +285,12 @@
deb_setf("seq? %d\n", seq);
wr(DIB3000MC_REG_SEQ_TPS,DIB3000MC_SEQ_TPS(seq,1));
-
-
dib3000mc_set_impulse_noise(state,0,ofdm->constellation,ofdm->bandwidth);
-
- val = rd(DIB3000MC_REG_DEMOD_PARM);
- wr(DIB3000MC_REG_DEMOD_PARM,val|DIB3000MC_DEMOD_RST_DEMOD_ON);
- wr(DIB3000MC_REG_DEMOD_PARM,val);
-
- msleep(70);
-
- wr_foreach(dib3000mc_reg_agc_bandwidth, dib3000mc_agc_bandwidth);
-
- /* something has to be auto searched */
- if (ofdm->constellation == QAM_AUTO ||
+ *auto_val = ofdm->constellation == QAM_AUTO ||
ofdm->hierarchy_information == HIERARCHY_AUTO ||
ofdm->guard_interval == GUARD_INTERVAL_AUTO ||
ofdm->transmission_mode == TRANSMISSION_MODE_AUTO ||
fe_cr == FEC_AUTO ||
- fep->inversion == INVERSION_AUTO
- ) {
- int as_count=0;
-
- deb_setf("autosearch enabled.\n");
-
- val = rd(DIB3000MC_REG_DEMOD_PARM);
- wr(DIB3000MC_REG_DEMOD_PARM,val |
DIB3000MC_DEMOD_RST_AUTO_SRCH_ON);
- wr(DIB3000MC_REG_DEMOD_PARM,val);
-
- while ((search_state = dib3000_search_status(
- rd(DIB3000MC_REG_AS_IRQ),1)) < 0 &&
as_count++ < 100)
- msleep(10);
-
- deb_info("search_state after autosearch %d after %d
checks\n",search_state,as_count);
-
- if (search_state == 1) {
- struct dvb_frontend_parameters feps;
- feps.u.ofdm.bandwidth = ofdm->bandwidth; /* bw is not
auto searched */;
- if (dib3000mc_get_frontend(fe, &feps) == 0) {
- deb_setf("reading tuning data from frontend
succeeded.\n");
- return dib3000mc_set_frontend(fe, &feps, 0);
- }
- }
- } else {
-
wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT|DIB3000MC_ISI_ACTIVATE);
- wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[qam]);
- /* set_offset_cfg */
- wr_foreach(dib3000mc_reg_offset,
- dib3000mc_offset[(ofdm->transmission_mode ==
TRANSMISSION_MODE_8K)+1]);
-
-// dib3000mc_set_timing(1,ofdm->transmission_mode,ofdm->bandwidth);
-
-// wr(DIB3000MC_REG_LOCK_MASK,DIB3000MC_ACTIVATE_LOCK_MASK); /*
activates some locks if needed */
-
-/*
set_or(DIB3000MC_REG_DEMOD_PARM,DIB3000MC_DEMOD_RST_AUTO_SRCH_ON);
-
set_or(DIB3000MC_REG_DEMOD_PARM,DIB3000MC_DEMOD_RST_AUTO_SRCH_OFF);
- wr(DIB3000MC_REG_RESTART_VIT,DIB3000MC_RESTART_VIT_ON);
- wr(DIB3000MC_REG_RESTART_VIT,DIB3000MC_RESTART_VIT_OFF);*/
- }
-
- return 0;
-}
-
-
-static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode)
-{
- struct dib3000_state* state = (struct dib3000_state*)
fe->demodulator_priv;
-
- state->timing_offset = 0;
- state->timing_offset_comp_done = 0;
-
- wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_DIV_OUT_ON);
- wr(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_PAR_CONT_CLK);
- wr(DIB3000MC_REG_RST_I2C_ADDR,
- DIB3000MC_DEMOD_ADDR(state->config.demod_address) |
- DIB3000MC_DEMOD_ADDR_ON);
-
- wr(DIB3000MC_REG_RST_I2C_ADDR,
- DIB3000MC_DEMOD_ADDR(state->config.demod_address));
-
- wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_CONFIG);
- wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_OFF);
-
- wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_UP);
- wr(DIB3000MC_REG_CLK_CFG_2,DIB3000MC_CLK_CFG_2_PUP_MOBILE);
- wr(DIB3000MC_REG_CLK_CFG_3,DIB3000MC_CLK_CFG_3_POWER_UP);
- wr(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_INIT);
-
- wr(DIB3000MC_REG_RST_UNC,DIB3000MC_RST_UNC_OFF);
- wr(DIB3000MC_REG_UNK_19,DIB3000MC_UNK_19);
-
- wr(33,5);
- wr(36,81);
- wr(DIB3000MC_REG_UNK_88,DIB3000MC_UNK_88);
-
- wr(DIB3000MC_REG_UNK_99,DIB3000MC_UNK_99);
- wr(DIB3000MC_REG_UNK_111,DIB3000MC_UNK_111_PH_N_MODE_0); /* phase noise
algo off */
-
- /* mobile mode - portable reception */
- wr_foreach(dib3000mc_reg_mobile_mode,dib3000mc_mobile_mode[1]);
-
-/* TUNER_PANASONIC_ENV57H12D5: */
- wr_foreach(dib3000mc_reg_agc_bandwidth,dib3000mc_agc_bandwidth);
-
wr_foreach(dib3000mc_reg_agc_bandwidth_general,dib3000mc_agc_bandwidth_general);
- wr_foreach(dib3000mc_reg_agc,dib3000mc_agc_tuner[1]);
-
- wr(DIB3000MC_REG_UNK_110,DIB3000MC_UNK_110);
- wr(26,0x6680);
- wr(DIB3000MC_REG_UNK_1,DIB3000MC_UNK_1);
- wr(DIB3000MC_REG_UNK_2,DIB3000MC_UNK_2);
- wr(DIB3000MC_REG_UNK_3,DIB3000MC_UNK_3);
- wr(DIB3000MC_REG_SEQ_TPS,DIB3000MC_SEQ_TPS_DEFAULT);
-
- wr_foreach(dib3000mc_reg_bandwidth_general,dib3000mc_bandwidth_general);
- wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_8mhz);
-
- wr(DIB3000MC_REG_UNK_4,DIB3000MC_UNK_4);
-
- wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_OFF);
- wr(DIB3000MC_REG_SET_DDS_FREQ_LSB,DIB3000MC_DDS_FREQ_LSB);
-
- dib3000mc_set_timing(state,0,TRANSMISSION_MODE_2K,BANDWIDTH_8_MHZ);
-// wr_foreach(dib3000mc_reg_timing_freq,dib3000mc_timing_freq[3]);
-
- wr(DIB3000MC_REG_UNK_120,DIB3000MC_UNK_120);
- wr(DIB3000MC_REG_UNK_134,DIB3000MC_UNK_134);
- wr(DIB3000MC_REG_FEC_CFG,DIB3000MC_FEC_CFG);
-
-
dib3000mc_set_impulse_noise(state,0,TRANSMISSION_MODE_8K,BANDWIDTH_8_MHZ);
-
-/* output mode control, just the MPEG2_SLAVE */
- set_or(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_SLAVE);
- wr(DIB3000MC_REG_SMO_MODE,DIB3000MC_SMO_MODE_SLAVE);
- wr(DIB3000MC_REG_FIFO_THRESHOLD,DIB3000MC_FIFO_THRESHOLD_SLAVE);
- wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_SLAVE);
-
-/* MPEG2_PARALLEL_CONTINUOUS_CLOCK
- wr(DIB3000MC_REG_OUTMODE,
- DIB3000MC_SET_OUTMODE(DIB3000MC_OM_PAR_CONT_CLK,
- rd(DIB3000MC_REG_OUTMODE)));
-
- wr(DIB3000MC_REG_SMO_MODE,
- DIB3000MC_SMO_MODE_DEFAULT |
- DIB3000MC_SMO_MODE_188);
-
- wr(DIB3000MC_REG_FIFO_THRESHOLD,DIB3000MC_FIFO_THRESHOLD_DEFAULT);
- wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_DIV_OUT_ON);
-*/
-/* diversity */
- wr(DIB3000MC_REG_DIVERSITY1,DIB3000MC_DIVERSITY1_DEFAULT);
- wr(DIB3000MC_REG_DIVERSITY2,DIB3000MC_DIVERSITY2_DEFAULT);
-
- wr(DIB3000MC_REG_DIVERSITY3,DIB3000MC_DIVERSITY3_IN_OFF);
-
- set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_DIV_IN_OFF);
-
-
-/* if (state->config->pll_init) {
- wr(DIB3000MC_REG_TUNER,
- DIB3000_TUNER_WRITE_ENABLE(state->config->pll_addr));
- state->config->pll_init(fe);
- wr(DIB3000MC_REG_TUNER,
- DIB3000_TUNER_WRITE_DISABLE(state->config->pll_addr));
- }*/
+ fep->inversion == INVERSION_AUTO;
return 0;
}
@@ -476,7 +307,8 @@
if (!(rd(DIB3000MC_REG_LOCK_507) & DIB3000MC_LOCK_507))
return 0;
- dds_val = ((rd(DIB3000MC_REG_DDS_FREQ_MSB) & 0xff) << 16) +
rd(DIB3000MC_REG_DDS_FREQ_LSB);
+ dds_val = (rd(DIB3000MC_REG_DDS_FREQ_MSB) << 16) +
rd(DIB3000MC_REG_DDS_FREQ_LSB);
+ deb_getf("DDS_FREQ: %6x\n",dds_val);
if (dds_val < threshold)
inv_test1 = 0;
else if (dds_val == threshold)
@@ -484,7 +316,8 @@
else
inv_test1 = 2;
- dds_val = ((rd(DIB3000MC_REG_SET_DDS_FREQ_MSB) & 0xff) << 16) +
rd(DIB3000MC_REG_SET_DDS_FREQ_LSB);
+ dds_val = (rd(DIB3000MC_REG_SET_DDS_FREQ_MSB) << 16) +
rd(DIB3000MC_REG_SET_DDS_FREQ_LSB);
+ deb_getf("DDS_SET_FREQ: %6x\n",dds_val);
if (dds_val < threshold)
inv_test2 = 0;
else if (dds_val == threshold)
@@ -499,6 +332,9 @@
deb_getf("inversion %d %d, %d\n", inv_test2, inv_test1, fep->inversion);
+ fep->frequency = state->last_tuned_freq;
+ fep->u.ofdm.bandwidth= state->last_tuned_bw;
+
tps_val = rd(DIB3000MC_REG_TUNING_PARM);
switch (DIB3000MC_TP_QAM(tps_val)) {
@@ -614,9 +450,211 @@
err("unexpected transmission mode return by TPS (%d)",
tps_val);
break;
}
+ deb_getf("\n");
+
+ return 0;
+}
+
+static int dib3000mc_set_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep, int
tuner)
+{
+ struct dib3000_state* state = (struct dib3000_state*)
fe->demodulator_priv;
+ struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
+ int search_state,auto_val;
+ u16 val;
+
+ if (tuner) { /* initial call from dvb */
+ dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
+ state->config.pll_set(fe,fep,NULL);
+ dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
+
+ state->last_tuned_freq = fep->frequency;
+ // if (!scanboost) {
+
dib3000mc_set_timing(state,0,ofdm->transmission_mode,ofdm->bandwidth);
+ dib3000mc_init_auto_scan(state, ofdm->bandwidth, 0);
+ state->last_tuned_bw = ofdm->bandwidth;
+
+
wr_foreach(dib3000mc_reg_agc_bandwidth,dib3000mc_agc_bandwidth);
+ wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_AGC);
+ wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_OFF);
+
+ /* Default cfg isi offset adp */
+ wr_foreach(dib3000mc_reg_offset,dib3000mc_offset[0]);
+
+ wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT |
DIB3000MC_ISI_INHIBIT);
+ dib3000mc_set_adp_cfg(state,ofdm->constellation);
+ wr(DIB3000MC_REG_UNK_133,DIB3000MC_UNK_133);
+
+
wr_foreach(dib3000mc_reg_bandwidth_general,dib3000mc_bandwidth_general);
+ /* power smoothing */
+ if (ofdm->bandwidth != BANDWIDTH_8_MHZ) {
+ wr_foreach(dib3000mc_reg_bw,dib3000mc_bw[0]);
+ } else {
+ wr_foreach(dib3000mc_reg_bw,dib3000mc_bw[3]);
+ }
+ auto_val = 0;
+ dib3000mc_set_general_cfg(state,fep,&auto_val);
+
dib3000mc_set_impulse_noise(state,0,ofdm->constellation,ofdm->bandwidth);
+
+ val = rd(DIB3000MC_REG_DEMOD_PARM);
+
wr(DIB3000MC_REG_DEMOD_PARM,val|DIB3000MC_DEMOD_RST_DEMOD_ON);
+ wr(DIB3000MC_REG_DEMOD_PARM,val);
+ // }
+ msleep(70);
+
+ /* something has to be auto searched */
+ if (auto_val) {
+ int as_count=0;
+
+ deb_setf("autosearch enabled.\n");
+
+ val = rd(DIB3000MC_REG_DEMOD_PARM);
+ wr(DIB3000MC_REG_DEMOD_PARM,val |
DIB3000MC_DEMOD_RST_AUTO_SRCH_ON);
+ wr(DIB3000MC_REG_DEMOD_PARM,val);
+
+ while ((search_state = dib3000_search_status(
+ rd(DIB3000MC_REG_AS_IRQ),1)) <
0 && as_count++ < 100)
+ msleep(10);
+
+ deb_info("search_state after autosearch %d after %d
checks\n",search_state,as_count);
+
+ if (search_state == 1) {
+ struct dvb_frontend_parameters feps;
+ if (dib3000mc_get_frontend(fe, &feps) == 0) {
+ deb_setf("reading tuning data from
frontend succeeded.\n");
+ return dib3000mc_set_frontend(fe,
&feps, 0);
+ }
+ }
+ } else {
+
dib3000mc_set_impulse_noise(state,0,ofdm->transmission_mode,ofdm->bandwidth);
+
wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT|DIB3000MC_ISI_ACTIVATE);
+ dib3000mc_set_adp_cfg(state,ofdm->constellation);
+
+ /* set_offset_cfg */
+ wr_foreach(dib3000mc_reg_offset,
+
dib3000mc_offset[(ofdm->transmission_mode == TRANSMISSION_MODE_8K)+1]);
+ }
+ } else { /* second call, after autosearch (fka: set_WithKnownParams) */
+//
dib3000mc_set_timing(state,1,ofdm->transmission_mode,ofdm->bandwidth);
+
+ auto_val = 0;
+ dib3000mc_set_general_cfg(state,fep,&auto_val);
+ if (auto_val)
+ deb_info("auto_val is true, even though an auto search
was already performed.\n");
+
+
dib3000mc_set_impulse_noise(state,0,ofdm->constellation,ofdm->bandwidth);
+
+ val = rd(DIB3000MC_REG_DEMOD_PARM);
+ wr(DIB3000MC_REG_DEMOD_PARM,val |
DIB3000MC_DEMOD_RST_AUTO_SRCH_ON);
+ wr(DIB3000MC_REG_DEMOD_PARM,val);
+
+ msleep(30);
+
+
wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT|DIB3000MC_ISI_ACTIVATE);
+ dib3000mc_set_adp_cfg(state,ofdm->constellation);
+ wr_foreach(dib3000mc_reg_offset,
+ dib3000mc_offset[(ofdm->transmission_mode ==
TRANSMISSION_MODE_8K)+1]);
+
+
+ }
return 0;
}
+static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode)
+{
+ deb_info("init start\n");
+ struct dib3000_state* state = (struct dib3000_state*)
fe->demodulator_priv;
+
+ state->timing_offset = 0;
+ state->timing_offset_comp_done = 0;
+
+ wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_CONFIG);
+ wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_OFF);
+ wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_UP);
+ wr(DIB3000MC_REG_CLK_CFG_2,DIB3000MC_CLK_CFG_2_PUP_MOBILE);
+ wr(DIB3000MC_REG_CLK_CFG_3,DIB3000MC_CLK_CFG_3_POWER_UP);
+ wr(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_INIT);
+
+ wr(DIB3000MC_REG_RST_UNC,DIB3000MC_RST_UNC_OFF);
+ wr(DIB3000MC_REG_UNK_19,DIB3000MC_UNK_19);
+
+ wr(33,5);
+ wr(36,81);
+ wr(DIB3000MC_REG_UNK_88,DIB3000MC_UNK_88);
+
+ wr(DIB3000MC_REG_UNK_99,DIB3000MC_UNK_99);
+ wr(DIB3000MC_REG_UNK_111,DIB3000MC_UNK_111_PH_N_MODE_0); /* phase noise
algo off */
+
+ /* mobile mode - portable reception */
+ wr_foreach(dib3000mc_reg_mobile_mode,dib3000mc_mobile_mode[1]);
+
+/* TUNER_PANASONIC_ENV57H12D5: */
+ wr_foreach(dib3000mc_reg_agc_bandwidth,dib3000mc_agc_bandwidth);
+
wr_foreach(dib3000mc_reg_agc_bandwidth_general,dib3000mc_agc_bandwidth_general);
+ wr_foreach(dib3000mc_reg_agc,dib3000mc_agc_tuner[1]);
+
+ wr(DIB3000MC_REG_UNK_110,DIB3000MC_UNK_110);
+ wr(26,0x6680);
+ wr(DIB3000MC_REG_UNK_1,DIB3000MC_UNK_1);
+ wr(DIB3000MC_REG_UNK_2,DIB3000MC_UNK_2);
+ wr(DIB3000MC_REG_UNK_3,DIB3000MC_UNK_3);
+ wr(DIB3000MC_REG_SEQ_TPS,DIB3000MC_SEQ_TPS_DEFAULT);
+
+ wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_8mhz);
+ wr_foreach(dib3000mc_reg_bandwidth_general,dib3000mc_bandwidth_general);
+
+ wr(DIB3000MC_REG_UNK_4,DIB3000MC_UNK_4);
+
+ wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_OFF);
+ wr(DIB3000MC_REG_SET_DDS_FREQ_LSB,DIB3000MC_DDS_FREQ_LSB);
+
+ dib3000mc_set_timing(state,0,TRANSMISSION_MODE_8K,BANDWIDTH_8_MHZ);
+// wr_foreach(dib3000mc_reg_timing_freq,dib3000mc_timing_freq[3]);
+
+ wr(DIB3000MC_REG_UNK_120,DIB3000MC_UNK_120);
+ wr(DIB3000MC_REG_UNK_134,DIB3000MC_UNK_134);
+ wr(DIB3000MC_REG_FEC_CFG,DIB3000MC_FEC_CFG);
+
+ wr(DIB3000MC_REG_DIVERSITY3,DIB3000MC_DIVERSITY3_IN_OFF);
+
+
dib3000mc_set_impulse_noise(state,0,TRANSMISSION_MODE_8K,BANDWIDTH_8_MHZ);
+
+/* output mode control, just the MPEG2_SLAVE */
+// set_or(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_SLAVE);
+ wr(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_SLAVE);
+ wr(DIB3000MC_REG_SMO_MODE,DIB3000MC_SMO_MODE_SLAVE);
+ wr(DIB3000MC_REG_FIFO_THRESHOLD,DIB3000MC_FIFO_THRESHOLD_SLAVE);
+ wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_SLAVE);
+
+/* MPEG2_PARALLEL_CONTINUOUS_CLOCK
+ wr(DIB3000MC_REG_OUTMODE,
+ DIB3000MC_SET_OUTMODE(DIB3000MC_OM_PAR_CONT_CLK,
+ rd(DIB3000MC_REG_OUTMODE)));
+
+ wr(DIB3000MC_REG_SMO_MODE,
+ DIB3000MC_SMO_MODE_DEFAULT |
+ DIB3000MC_SMO_MODE_188);
+
+ wr(DIB3000MC_REG_FIFO_THRESHOLD,DIB3000MC_FIFO_THRESHOLD_DEFAULT);
+ wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_DIV_OUT_ON);
+*/
+
+/* diversity */
+ wr(DIB3000MC_REG_DIVERSITY1,DIB3000MC_DIVERSITY1_DEFAULT);
+ wr(DIB3000MC_REG_DIVERSITY2,DIB3000MC_DIVERSITY2_DEFAULT);
+
+ set_and(DIB3000MC_REG_DIVERSITY3,DIB3000MC_DIVERSITY3_IN_OFF);
+
+ set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_DIV_IN_OFF);
+
+/* if (state->config->pll_init) {
+ dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
+ state->config->pll_init(fe,NULL);
+ dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
+ }*/
+ deb_info("init end\n");
+ return 0;
+}
static int dib3000mc_read_status(struct dvb_frontend* fe, fe_status_t *stat)
{
struct dib3000_state* state = (struct dib3000_state*)
fe->demodulator_priv;
@@ -627,12 +665,12 @@
*stat |= FE_HAS_SIGNAL;
if (DIB3000MC_CARRIER_LOCK(lock))
*stat |= FE_HAS_CARRIER;
- if (DIB3000MC_TPS_LOCK(lock)) /* VIT_LOCK ? */
+ if (DIB3000MC_TPS_LOCK(lock))
*stat |= FE_HAS_VITERBI;
if (DIB3000MC_MPEG_SYNC_LOCK(lock))
*stat |= (FE_HAS_SYNC | FE_HAS_LOCK);
- deb_info("actual status is %2x\n",*stat);
+ deb_stat("actual status is %2x fifo_level: %x,244: %x, 206: %x, 207:
%x, 1040: %x\n",*stat,rd(510),rd(244),rd(206),rd(207),rd(1040));
return 0;
}
@@ -659,7 +697,7 @@
u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB);
*strength = (((val >> 6) & 0xff) << 8) + (val & 0x3f);
- deb_info("signal: mantisse = %d, exponent = %d\n",(*strength >> 8) &
0xff, *strength & 0xff);
+ deb_stat("signal: mantisse = %d, exponent = %d\n",(*strength >> 8) &
0xff, *strength & 0xff);
return 0;
}
@@ -667,9 +705,8 @@
static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr)
{
struct dib3000_state* state = (struct dib3000_state*)
fe->demodulator_priv;
-
- u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_MSB),
- val2 = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB);
+ u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB),
+ val2 = rd(DIB3000MC_REG_SIGNAL_NOISE_MSB);
u16 sig,noise;
sig = (((val >> 6) & 0xff) << 8) + (val & 0x3f);
@@ -679,9 +716,9 @@
else
*snr = (u16) sig/noise;
- deb_info("signal: mantisse = %d, exponent = %d\n",(sig >> 8) & 0xff,
sig & 0xff);
- deb_info("noise: mantisse = %d, exponent = %d\n",(noise >> 8) & 0xff,
noise & 0xff);
- deb_info("snr: %d\n",*snr);
+ deb_stat("signal: mantisse = %d, exponent = %d\n",(sig >> 8) & 0xff,
sig & 0xff);
+ deb_stat("noise: mantisse = %d, exponent = %d\n",(noise >> 8) & 0xff,
noise & 0xff);
+ deb_stat("snr: %d\n",*snr);
return 0;
}
@@ -698,7 +735,7 @@
static int dib3000mc_fe_get_tune_settings(struct dvb_frontend* fe, struct
dvb_frontend_tune_settings *tune)
{
- tune->min_delay_ms = 800;
+ tune->min_delay_ms = 2000;
tune->step_size = 166667;
tune->max_drift = 166667 * 2;
@@ -718,23 +755,15 @@
static void dib3000mc_release(struct dvb_frontend* fe)
{
struct dib3000_state *state = (struct dib3000_state*)
fe->demodulator_priv;
- dib3000_dealloc_pid_list(state);
kfree(state);
}
/* pid filter and transfer stuff */
-static int dib3000mc_pid_control(struct dvb_frontend *fe,int pid,int onoff)
+static int dib3000mc_pid_control(struct dvb_frontend *fe,int index, int
pid,int onoff)
{
struct dib3000_state *state = fe->demodulator_priv;
- int index = dib3000_get_pid_index(state->pid_list, DIB3000MC_NUM_PIDS,
pid, &state->pid_list_lock,onoff);
pid = (onoff ? pid | DIB3000_ACTIVATE_PID_FILTERING : 0);
-
- if (index >= 0) {
wr(index+DIB3000MC_REG_FIRST_PID,pid);
- } else {
- err("no more pids for filtering.");
- return -ENOMEM;
- }
return 0;
}
@@ -742,10 +771,14 @@
{
struct dib3000_state *state = (struct dib3000_state*)
fe->demodulator_priv;
u16 tmp = rd(DIB3000MC_REG_SMO_MODE);
- deb_xfer("%s fifo",onoff ? "enabling" : "disabling");
+
+ deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
+
if (onoff) {
+ deb_xfer("%d %x\n",tmp & DIB3000MC_SMO_MODE_FIFO_UNFLUSH,tmp &
DIB3000MC_SMO_MODE_FIFO_UNFLUSH);
wr(DIB3000MC_REG_SMO_MODE,tmp &
DIB3000MC_SMO_MODE_FIFO_UNFLUSH);
} else {
+ deb_xfer("%d %x\n",tmp | DIB3000MC_SMO_MODE_FIFO_FLUSH,tmp |
DIB3000MC_SMO_MODE_FIFO_FLUSH);
wr(DIB3000MC_REG_SMO_MODE,tmp | DIB3000MC_SMO_MODE_FIFO_FLUSH);
}
return 0;
@@ -755,19 +788,57 @@
{
struct dib3000_state *state = fe->demodulator_priv;
u16 tmp = rd(DIB3000MC_REG_SMO_MODE);
- deb_xfer("%s pid parsing",onoff ? "enabling" : "disabling");
+
+ deb_xfer("%s pid parsing\n",onoff ? "enabling" : "disabling");
+
if (onoff) {
+ deb_xfer("%d %x\n",tmp | DIB3000MC_SMO_MODE_PID_PARSE,tmp |
DIB3000MC_SMO_MODE_PID_PARSE);
wr(DIB3000MC_REG_SMO_MODE,tmp | DIB3000MC_SMO_MODE_PID_PARSE);
} else {
+ deb_xfer("%d %x\n",tmp & DIB3000MC_SMO_MODE_NO_PID_PARSE,tmp &
DIB3000MC_SMO_MODE_NO_PID_PARSE);
wr(DIB3000MC_REG_SMO_MODE,tmp &
DIB3000MC_SMO_MODE_NO_PID_PARSE);
}
return 0;
}
+static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8
pll_addr)
+{
+ struct dib3000_state *state = (struct dib3000_state*)
fe->demodulator_priv;
+ if (onoff) {
+ wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
+ } else {
+ wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_DISABLE(pll_addr));
+ }
+ return 0;
+}
+
+static int dib3000mc_demod_init(struct dib3000_state *state)
+{
+ u16 default_addr = 0x0a;
+ /* first init */
+ if (state->config.demod_address != default_addr) {
+ deb_info("initializing the demod the first time. Setting demod
addr to 0x%x\n",default_addr);
+ wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_DIV_OUT_ON);
+ wr(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_PAR_CONT_CLK);
+
+ wr(DIB3000MC_REG_RST_I2C_ADDR,
+ DIB3000MC_DEMOD_ADDR(default_addr) |
+ DIB3000MC_DEMOD_ADDR_ON);
+
+ state->config.demod_address = default_addr;
+
+ wr(DIB3000MC_REG_RST_I2C_ADDR,
+ DIB3000MC_DEMOD_ADDR(default_addr));
+ } else
+ deb_info("demod is already initialized. Demod addr:
0x%x\n",state->config.demod_address);
+ return 0;
+}
+
+
static struct dvb_frontend_ops dib3000mc_ops;
struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config,
- struct i2c_adapter* i2c, struct
dib3000_xfer_ops *xfer_ops)
+ struct i2c_adapter* i2c, struct
dib_fe_xfer_ops *xfer_ops)
{
struct dib3000_state* state = NULL;
u16 devid;
@@ -790,19 +861,15 @@
if (devid != DIB3000MC_DEVICE_ID && devid != DIB3000P_DEVICE_ID)
goto error;
-
switch (devid) {
case DIB3000MC_DEVICE_ID:
- info("Found a DiBcom 3000-MC.");
+ info("Found a DiBcom 3000-MC, interesting...");
break;
case DIB3000P_DEVICE_ID:
info("Found a DiBcom 3000-P.");
break;
}
- if (dib3000_init_pid_list(state,DIB3000MC_NUM_PIDS))
- goto error;
-
/* create dvb_frontend */
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
@@ -811,6 +878,9 @@
xfer_ops->pid_parse = dib3000mc_pid_parse;
xfer_ops->fifo_ctrl = dib3000mc_fifo_control;
xfer_ops->pid_ctrl = dib3000mc_pid_control;
+ xfer_ops->tuner_pass_ctrl = dib3000mc_tuner_pass_ctrl;
+
+ dib3000mc_demod_init(state);
return &state->frontend;
@@ -834,6 +904,7 @@
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_RECOVER |
FE_CAN_HIERARCHY_AUTO,
},
diff -uraNwB linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000mc_priv.h
linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000mc_priv.h
--- linux-2.6.11-rc2/drivers/media/dvb/frontends/dib3000mc_priv.h
2005-01-20 19:54:04.000000000 +0100
+++ linux-2.6.11-rc2-dvb/drivers/media/dvb/frontends/dib3000mc_priv.h
2005-01-20 19:56:38.000000000 +0100
@@ -13,31 +13,6 @@
#ifndef __DIB3000MC_PRIV_H__
#define __DIB3000MC_PRIV_H__
-/* info and err, taken from usb.h, if there is anything available like by
default,
- * please change !
- */
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ##
arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ ,
## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__
, ## arg)
-
-// defines the phase noise algorithm to be used (O:Inhib, 1:CPE on)
-#define DEF_PHASE_NOISE_MODE 0
-
-// define Mobille algorithms
-#define DEF_MOBILE_MODE Auto_Reception
-
-// defines the tuner type
-#define DEF_TUNER_TYPE TUNER_PANASONIC_ENV57H13D5
-
-// defines the impule noise algorithm to be used
-#define DEF_IMPULSE_NOISE_MODE 0
-
-// defines the MPEG2 data output format
-#define DEF_MPEG2_OUTPUT_188 0
-
-// defines the MPEG2 data output format
-#define DEF_OUTPUT_MODE MPEG2_PARALLEL_CONTINUOUS_CLOCK
-
/*
* Demodulator parameters
* reg: 0 1 1 1 11 11 111
@@ -115,7 +90,7 @@
{ 0x1c, 0xfba5, 0x60, 0x9c25, 0x1e3, 0x0cb7, 0x1, 0xb0d0 };
static u16 dib3000mc_bandwidth_8mhz[] =
- { 0x19, 0x5c30, 0x54, 0x88a0, 0x1a6, 0xab20, 0x1, 0xb0b0 };
+ { 0x19, 0x5c30, 0x54, 0x88a0, 0x1a6, 0xab20, 0x1, 0xb0d0 };
static u16 dib3000mc_reg_bandwidth_general[] = { 12,13,14,15 };
static u16 dib3000mc_bandwidth_general[] = { 0x0000, 0x03e8, 0x0000, 0x03f2 };
@@ -173,11 +148,11 @@
static u16 dib3000mc_reg_imp_noise_ctl[] = { 34,35 };
static u16 dib3000mc_imp_noise_ctl[][2] = {
- { 0x1294, 0xfff8 }, /* mode 0 */
- { 0x1294, 0xfff8 }, /* mode 1 */
- { 0x1294, 0xfff8 }, /* mode 2 */
- { 0x1294, 0xfff8 }, /* mode 3 */
- { 0x1294, 0xfff8 }, /* mode 4 */
+ { 0x1294, 0x1ff8 }, /* mode 0 */
+ { 0x1294, 0x1ff8 }, /* mode 1 */
+ { 0x1294, 0x1ff8 }, /* mode 2 */
+ { 0x1294, 0x1ff8 }, /* mode 3 */
+ { 0x1294, 0x1ff8 }, /* mode 4 */
};
/* AGC registers */
@@ -314,12 +289,26 @@
#define DIB3000MC_REG_FEC_CFG ( 195)
#define DIB3000MC_FEC_CFG ( 0x10)
+/*
+ * reg 206, output mode
+ * 1111 1111
+ * |||| ||||
+ * |||| |||+- unk
+ * |||| ||+-- unk
+ * |||| |+--- unk (on by default)
+ * |||| +---- fifo_ctrl (1 = inhibit (flushed), 0 = active
(unflushed))
+ * |||+------ pid_parse (1 = enabled, 0 = disabled)
+ * ||+------- outp_188 (1 = TS packet size 188, 0 = packet size
204)
+ * |+-------- unk
+ * +--------- unk
+ */
+
#define DIB3000MC_REG_SMO_MODE ( 206)
#define DIB3000MC_SMO_MODE_DEFAULT (1 << 2)
#define DIB3000MC_SMO_MODE_FIFO_FLUSH (1 << 3)
-#define DIB3000MC_SMO_MODE_FIFO_UNFLUSH ~DIB3000MC_SMO_MODE_FIFO_FLUSH
+#define DIB3000MC_SMO_MODE_FIFO_UNFLUSH (0xfff7)
#define DIB3000MC_SMO_MODE_PID_PARSE (1 << 4)
-#define DIB3000MC_SMO_MODE_NO_PID_PARSE ~DIB3000MC_SMO_MODE_PID_PARSE
+#define DIB3000MC_SMO_MODE_NO_PID_PARSE (0xffef)
#define DIB3000MC_SMO_MODE_188 (1 << 5)
#define DIB3000MC_SMO_MODE_SLAVE (DIB3000MC_SMO_MODE_DEFAULT | \
DIB3000MC_SMO_MODE_188 | DIB3000MC_SMO_MODE_PID_PARSE |
(1<<1))
@@ -392,7 +381,7 @@
#define DIB3000MC_REG_RST_I2C_ADDR ( 1024)
#define DIB3000MC_DEMOD_ADDR_ON ( 1)
-#define DIB3000MC_DEMOD_ADDR(a) ((a << 3) & 0x03F0)
+#define DIB3000MC_DEMOD_ADDR(a) ((a << 4) & 0x03F0)
#define DIB3000MC_REG_RESTART ( 1027)
#define DIB3000MC_RESTART_OFF (0x0000)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
