Hi. #####################################################################
[1.] Problem when rebooting ##################################################################### [2.] I'm running Debian/unstable and each time I reboot the system, I get a "Unable to handle kernel pading request at virtual address ...". I had the same problem on kernel versions 2.6.9, 2.6.10 (also with Debian kernel-source-2.6.xx packages) and 2.6.11-rc1 ##################################################################### [3.] kernel, reboot, via-rhine ##################################################################### [4.] Linux version 2.6.11-rc2-Debian ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Sat Jan 22 12:54:18 CET 2005 ##################################################################### [5.] Nothing in the log, so I took a picture, see http://mordor.ath.cx/stuff/kernelpb.jpg ##################################################################### [6.] Nothing, except reboot -d -f -i ##################################################################### [7.] [7.1.] [EMAIL PROTECTED]:~]# /usr/src/linux-2.6.11-rc2/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux rivendell 2.6.11-rc2-Debian #1 Sat Jan 22 12:54:18 CET 2005 i686 GNU/Linux Gnu C 3.3.5 Gnu make 3.80 binutils 2.15 util-linux 2.12p mount 2.12p module-init-tools 3.1 e2fsprogs 1.36-rc3 reiserfsprogs line reiser4progs line nfs-utils 1.0.7 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.2.4 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.2.1 udev 050 Modules Loaded autofs4 floppy rtc evdev ov511 videodev ##################################################################### [7.2.] [EMAIL PROTECTED]:~]# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(tm) XP 1800+ stepping : 2 cpu MHz : 1537.653 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse pni syscall mp mmxext 3dnowext 3dnow bogomips : 3022.84 ##################################################################### [7.3.] [EMAIL PROTECTED]:~]# cat /proc/modules autofs4 16772 0 - Live 0xe0823000 floppy 54096 0 - Live 0xe0830000 rtc 11064 0 - Live 0xe0812000 evdev 7552 0 - Live 0xe0819000 ov511 81056 0 - Live 0xe0861000 videodev 7680 1 ov511, Live 0xe0816000 ##################################################################### [7.4.] [EMAIL PROTECTED]:~]# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 0800-0803 : PM1a_EVT_BLK 0804-0805 : PM1a_CNT_BLK 0808-080b : PM_TMR 0810-0815 : ACPI CPU throttle 0820-0823 : GPE0_BLK 0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c800-c8ff : 0000:01:00.0 d800-d81f : 0000:00:10.0 d800-d81f : uhci_hcd dc00-dc1f : 0000:00:10.1 dc00-dc1f : uhci_hcd e000-e01f : 0000:00:10.2 e000-e01f : uhci_hcd e400-e41f : 0000:00:10.3 e400-e41f : uhci_hcd e800-e83f : 0000:00:07.0 e800-e83f : Ensoniq AudioPCI ec00-ec7f : 0000:00:06.0 ec00-ec7f : via-rhine fc00-fc0f : 0000:00:0f.0 fc00-fc07 : ide0 fc08-fc0f : ide1 [EMAIL PROTECTED]:~]# cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000ccfff : Video ROM 000e0000-000effff : Extension ROM 000f0000-000fffff : System ROM 00100000-1ffeffff : System RAM 00100000-00342cec : Kernel code 00342ced-00428bff : Kernel data 1fff0000-1fff7fff : ACPI Tables 1fff8000-1fffffff : ACPI Non-volatile Storage bfd00000-dfcfffff : PCI Bus #01 c8000000-cfffffff : 0000:01:00.1 d0000000-d7ffffff : 0000:01:00.0 d0000000-d0ffffff : vesafb dfe00000-dfefffff : PCI Bus #01 dfee0000-dfeeffff : 0000:01:00.1 dfef0000-dfefffff : 0000:01:00.0 dffffd00-dffffdff : 0000:00:10.4 dffffd00-dffffdff : ehci_hcd dfffff80-dfffffff : 0000:00:06.0 dfffff80-dfffffff : via-rhine e0000000-e7ffffff : 0000:00:00.0 fec00000-fec00fff : reserved fee00000-fee00fff : reserved fff80000-ffffffff : reserved ##################################################################### [7.5.] [EMAIL PROTECTED]:~]# lspci -vvv|more 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) Subsystem: VIA Technologies, Inc.: Unknown device 0000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.5 Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: bfd00000-dfcfffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:06.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06) Subsystem: D-Link System Inc DFE-530TX rev A Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (29500ns min, 38000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at ec00 [size=128] Region 1: Memory at dfffff80 (32-bit, non-prefetchable) [size=128] Expansion ROM at dffe0000 [disabled] [size=64K] 0000:00:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06) Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at e800 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0 +,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5901 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B + ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5901 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1 +,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5901 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1 +,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5901 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1 +,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5901 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1 +,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5901 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x10 (64 bytes) Interrupt: pin C routed to IRQ 21 Region 0: Memory at dffffd00 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1 +,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South] Subsystem: VIA Technologies, Inc.: Unknown device 0000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0002 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B + ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c800 [size=256] Region 2: Memory at dfef0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at dfec0000 [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) Subsystem: ATI Technologies Inc: Unknown device 0003 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B + ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes) Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at dfee0000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ##################################################################### [7.6.] I don't have any scsi devices. ##################################################################### [7.7.] I don't have any kernel knownledges, but I suspect a problem in the via-rhine driver. I don't have any problems on my others machines and I don't think it's a Debian specific issue ... I hope this bug report will be usefull for you (it was my first one). In advance thanks, and sorry for my bad english. ##################################################################### -- Julien Cigar <[EMAIL PROTECTED]> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
