On Wed, Nov 20, 2013 at 04:41:48PM +0900, Magnus Damm wrote:
> From: Magnus Damm <d...@opensource.se>
>
> Add code to setup the r8a7791 PFC for the Koelsch board.
>
> At this point serial consoles are added, and in the near
> future other platform-device-only devices will be added
> here like for instance the r8a7791 DU.
>
> Signed-off-by: Magnus Damm <d...@opensource.se>
> ---
>
> arch/arm/mach-shmobile/board-koelsch.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
Thanks, I will queue this up.
Assuming all goes will I plan to push this and other updates
today or tomorrow.
>
> --- 0014/arch/arm/mach-shmobile/board-koelsch.c
> +++ work/arch/arm/mach-shmobile/board-koelsch.c 2013-11-20
> 16:18:28.000000000 +0900
> @@ -24,6 +24,7 @@
> #include <linux/input.h>
> #include <linux/kernel.h>
> #include <linux/leds.h>
> +#include <linux/pinctrl/machine.h>
> #include <linux/platform_data/gpio-rcar.h>
> #include <linux/platform_device.h>
> #include <mach/common.h>
> @@ -78,9 +79,20 @@ static const struct gpio_keys_platform_d
> .nbuttons = ARRAY_SIZE(gpio_buttons),
> };
>
> +static const struct pinctrl_map koelsch_pinctrl_map[] = {
> + /* SCIF0 (CN19: DEBUG SERIAL0) */
> + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
> + "scif0_data_d", "scif0"),
> + /* SCIF1 (CN20: DEBUG SERIAL1) */
> + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
> + "scif1_data_d", "scif1"),
> +};
> +
> static void __init koelsch_add_standard_devices(void)
> {
> r8a7791_clock_init();
> + pinctrl_register_mappings(koelsch_pinctrl_map,
> + ARRAY_SIZE(koelsch_pinctrl_map));
> r8a7791_pinmux_init();
> r8a7791_add_standard_devices();
> platform_device_register_data(&platform_bus, "leds-gpio", -1,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
