Hi Lee Thank you for your work.
Switch output voltage may have some problem here. 1. modify params of function in pcr_ops may affect other chips, like rts52xx, and we may add other registers or value in the future, just add params may not enough to handle this case. So I think different chip should use a different function here, and modify the function will not affect others. 2. rtl8402 has another difference with 8411 here, it doesn't use BPP_ASIC_1V8, but use BPP_ASIC_2V0. so, I will send another patch to fix this problem.
-static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +static int rtl84xx_switch_output_voltage(struct rtsx_pcr *pcr, + u8 voltage, int shift) { u8 mask, val; int err;- mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;+ mask = (BPP_REG_TUNED18 << shift) | BPP_PAD_MASK; if (voltage == OUTPUT_3V3) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3); if (err < 0) return err; - val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3; + val = (BPP_ASIC_3V3 << shift) | BPP_PAD_3V3; } else if (voltage == OUTPUT_1V8) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8); if (err < 0) return err; - val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8; + val = (BPP_ASIC_1V8 << shift) | BPP_PAD_1V8; } else { return -EINVAL; }
-- Best Regards Micky. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
