Yinghai, Could you help to take a look, we need it in our downstream kernel.
Thanks, Ethan On Wed, Nov 6, 2013 at 10:49 PM, ethan.zhao <ethan.ker...@gmail.com> wrote: > Though no specification about NumVFs register initial value after POST, to > void the confusion > lspci output as following before VF was enabled, we should clear the NumVFs > value left by BIOS > to zero: > > $lspci -vvv -s 03:00.0 > Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network > Connection (rev 01) > ~ > Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV) > IOVCap: Migration-, Interrupt Message Number: 000 > IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ > IOVSta: Migration- > Initial VFs: 64, Total VFs: 64, Number of VFs: 64, Function > Dependency Link: 00 > ^dazed ! > ~ > Signed-off-by: ethan.zhao <ethan.ker...@gmail.com> > --- > drivers/pci/iov.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c > index de8ffac..a4941ad 100644 > --- a/drivers/pci/iov.c > +++ b/drivers/pci/iov.c > @@ -439,6 +439,8 @@ static int sriov_init(struct pci_dev *dev, int pos) > > found: > pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl); > + /* VF Enable is cleared, so we could init the NumVFs register to 0 */ > + pci_write_config_word(dev, pos + PCI_SRIOV_NUM_VF, 0); > pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset); > pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride); > if (!offset || (total > 1 && !stride)) > -- > 1.8.3.4 (Apple Git-47) > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/