Add support for DMA controller of BCM2835 as used in the Raspberry Pi.
Currently it only supports cyclic DMA for serving the I2S driver.
Signed-off-by: Florian Meier <florian.me...@koalo.de>
---
arch/arm/boot/dts/bcm2835.dtsi | 22 +
drivers/dma/Kconfig | 6 +
drivers/dma/Makefile | 1 +
drivers/dma/bcm2835-dma.c | 880 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 909 insertions(+)
create mode 100644 drivers/dma/bcm2835-dma.c
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1e12aef..1514198 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -103,6 +103,28 @@
clocks = <&clk_mmc>;
status = "disabled";
};
+
+ dma: dma@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <1 16
+ 1 17
+ 1 18
+ 1 19
+ 1 20
+ 1 21
+ 1 22
+ 1 23
+ 1 24
+ 1 25
+ 1 26
+ 1 27
+ 1 28>;
+
+ #dma-cells = <1>;
+ dma-channels = <15>; /* DMA channel 15 is not handled
yet */
+ dma-requests = <32>;
+ };
};
clocks {
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f238cfd..f2d253b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -288,6 +288,12 @@ config DMA_OMAP
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
+config DMA_BCM2835
+ tristate "BCM2835 DMA engine support"
+ depends on (ARCH_BCM2835 || MACH_BCM2708)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+
config TI_CPPI41
tristate "AM33xx CPPI41 DMA support"
depends on ARCH_OMAP
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index db89035..6348157 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
obj-$(CONFIG_TI_CPPI41) += cppi41.o
diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
new file mode 100644
index 0000000..c3e53b3
--- /dev/null
+++ b/drivers/dma/bcm2835-dma.c
@@ -0,0 +1,880 @@
+/*
+ * BCM2835 DMA engine support
+ *
+ * This driver only supports cyclic DMA transfers
+ * as needed for the I2S module.
+ *
+ * Author: Florian Meier, <florian.me...@koalo.de>
+ * Copyright 2013
+ *
+ * based on
+ * OMAP DMAengine support by Russell King
+ *
+ * BCM2708 DMA Driver
+ * Copyright (C) 2010 Broadcom
+ *
+ * Raspberry Pi PCM I2S ALSA Driver
+ * Copyright (c) by Phil Poole 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+
+#include "virt-dma.h"
+
+struct bcm2835_dmadev {
+ struct dma_device ddev;
+ spinlock_t lock;
+ struct tasklet_struct task;
+ struct list_head pending;
+ uint32_t chans_available;
+ void __iomem *dma_base;
+ int *dma_irq_numbers;
+};
+
+struct bcm2835_dma_cb {
+ unsigned long info;
+ unsigned long src;
+ unsigned long dst;
+ unsigned long length;
+ unsigned long stride;
+ unsigned long next;
+ unsigned long pad[2];
+};
+
+struct bcm2835_chan {
+ struct virt_dma_chan vc;
+ struct list_head node;
+
+ struct dma_slave_config cfg;
+ unsigned dma_sig;
+ bool cyclic;
+
+ int dma_ch;
+ struct bcm2835_desc *desc;
+ unsigned sgidx;
+
+ void __iomem *dma_chan_base;
+ int dma_irq_number;
+ struct irqaction dma_irq_handler;
+};
+
+struct bcm2835_sg {
+ dma_addr_t addr;
+ uint32_t en; /* number of elements (24-bit) */
+ uint32_t fn; /* number of frames (16-bit) */
+};
+
+struct bcm2835_desc {
+ struct virt_dma_desc vd;
+ enum dma_transfer_direction dir;
+ dma_addr_t dev_addr;
+
+ uint8_t es;
+ unsigned int sync_type;
+ unsigned int sync_dreq;
+
+ unsigned int control_block_size;
+ struct bcm2835_dma_cb *control_block_base;
+ dma_addr_t control_block_base_phys;
+
+ unsigned sglen;
+ struct bcm2835_sg sg[0];
+};
+
+#define BCM2835_DMA_CS 0x00
+#define BCM2835_DMA_ADDR 0x04
+#define BCM2835_DMA_SOURCE_AD 0x0c
+#define BCM2835_DMA_DEST_AD 0x10
+#define BCM2835_DMA_NEXTCB 0x1C
+
+/* DMA CS Control and Status bits */
+#define BCM2835_DMA_ACTIVE (1 << 0)
+#define BCM2835_DMA_INT (1 << 2)
+#define BCM2835_DMA_ISPAUSED (1 << 4) /* Pause requested or not active */
+#define BCM2835_DMA_ISHELD (1 << 5) /* Is held by DREQ flow control */
+#define BCM2835_DMA_ERR (1 << 8)
+#define BCM2835_DMA_ABORT (1 << 30) /* stop current CB, go to next, WO */
+#define BCM2835_DMA_RESET (1 << 31) /* WO, self clearing */
+
+#define BCM2835_DMA_INT_EN (1 << 0)
+#define BCM2835_DMA_D_INC (1 << 4)
+#define BCM2835_DMA_D_DREQ (1 << 6)
+#define BCM2835_DMA_S_INC (1 << 8)
+#define BCM2835_DMA_S_DREQ (1 << 6)
+
+#define BCM2835_DMA_PER_MAP(x) ((x) << 16)
+
+#define BCM2835_DMA_DATA_TYPE_S8 1
+#define BCM2835_DMA_DATA_TYPE_S16 2
+#define BCM2835_DMA_DATA_TYPE_S32 4
+#define BCM2835_DMA_DATA_TYPE_S128 16
+
+#define BCM2835_DMA_CHANNEL_MASK 32565
+
+/* valid only for channels 0 - 14, 15 has its own base address */
+#define BCM2835_DMA_CHAN(n) ((n)<<8) /* base address */
+#define BCM2835_DMA_CHANIO(dma_base, n) ((dma_base)+BCM2835_DMA_CHAN(n))
+
+static const unsigned es_bytes[] = {
+ [BCM2835_DMA_DATA_TYPE_S8] = 1,
+ [BCM2835_DMA_DATA_TYPE_S16] = 2,
+ [BCM2835_DMA_DATA_TYPE_S32] = 4,
+ [BCM2835_DMA_DATA_TYPE_S128] = 16
+};
+
+static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d)
+{
+ return container_of(d, struct bcm2835_dmadev, ddev);
+}
+
+static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c)
+{
+ return container_of(c, struct bcm2835_chan, vc.chan);
+}
+
+static inline struct bcm2835_desc *to_bcm2835_dma_desc(
+ struct dma_async_tx_descriptor *t)
+{
+ return container_of(t, struct bcm2835_desc, vd.tx);
+}
+
+static bool bcm2835_dma_filter_fn(struct dma_chan *chan, void *param)
+{
+ return true;
+}
+
+static struct of_dma_filter_info bcm2835_dma_info = {
+ .filter_fn = bcm2835_dma_filter_fn,
+};
+
+static void bcm2835_dma_desc_free(struct virt_dma_desc *vd)
+{
+ struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd);
+ dma_free_coherent(desc->vd.tx.chan->device->dev,
+ desc->control_block_size,
+ desc->control_block_base,
+ desc->control_block_base_phys);
+ kfree(desc);
+}
+
+static void bcm2835_dma_start(void __iomem *dma_chan_base,
+ dma_addr_t control_block)
+{
+ dsb(); /* ARM data synchronization (push) operation */
+
+ writel(control_block, dma_chan_base+BCM2835_DMA_ADDR);
+ writel(BCM2835_DMA_ACTIVE, dma_chan_base+BCM2835_DMA_CS);
+}
+
+static int bcm2835_dma_abort(void __iomem *dma_chan_base)
+{
+ unsigned long int cs;
+ int rc = 0;
+
+ cs = readl(dma_chan_base + BCM2835_DMA_CS);
+
+ if (BCM2835_DMA_ACTIVE & cs) {
+ long int timeout = 10000;
+
+ /* write 0 to the active bit - pause the DMA */
+ writel(0, dma_chan_base + BCM2835_DMA_CS);
+
+ /* wait for any current AXI transfer to complete */
+ while (0 != (cs & BCM2835_DMA_ISPAUSED) && --timeout >= 0)
+ cs = readl(dma_chan_base + BCM2835_DMA_CS);
+
+ if (0 != (cs & BCM2835_DMA_ISPAUSED)) {
+ /* we'll un-pause when we set of our next DMA */
+ rc = -ETIMEDOUT;
+
+ } else if (BCM2835_DMA_ACTIVE & cs) {
+ /* terminate the control block chain */
+ writel(0, dma_chan_base + BCM2835_DMA_NEXTCB);
+
+ /* abort the whole DMA */
+ writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE,
+ dma_chan_base + BCM2835_DMA_CS);
+ }
+ }
+
+ return rc;
+}
+
+static void bcm2835_dma_start_sg(struct bcm2835_chan *c, struct bcm2835_desc
*d,
+ unsigned idx)
+{
+ struct bcm2835_sg *sg = d->sg + idx;
+ int frame;
+ int frames = sg->fn;
+
+ /*
+ * Iterate over all frames and create a control block
+ * for each frame and link them together.
+ */
+ for (frame = 0; frame < frames; frame++) {
+ struct bcm2835_dma_cb *control_block =
+ &d->control_block_base[frame];
+
+ /* Setup adresses */
+ if (d->dir == DMA_DEV_TO_MEM) {
+ control_block->info = BCM2835_DMA_D_INC;
+ control_block->src = d->dev_addr;
+ control_block->dst = sg->addr+frame*sg->en;
+ } else {
+ control_block->info = BCM2835_DMA_S_INC;
+ control_block->src = sg->addr+frame*sg->en;
+ control_block->dst = d->dev_addr;
+ }
+
+ /* Enable interrupt */
+ control_block->info |= BCM2835_DMA_INT_EN;
+
+ /* Setup synchronization */
+ if (d->sync_type != 0)
+ control_block->info |= d->sync_type;
+
+ /* Setup DREQ channel */
+ if (d->sync_dreq != 0)
+ control_block->info |=
+ BCM2835_DMA_PER_MAP(d->sync_dreq);
+
+ /* Length of a frame */
+ control_block->length = sg->en;
+
+ /*
+ * Next block is the next frame.
+ * This DMA engine driver currently only supports cyclic DMA.
+ * Therefore, wrap around at number of frames.
+ */
+ control_block->next = d->control_block_base_phys +
+ sizeof(struct bcm2835_dma_cb)*((frame+1)%(frames));
+
+ /* The following fields are not used here */
+ control_block->stride = 0;
+ control_block->pad[0] = 0;
+ control_block->pad[1] = 0;
+ }
+
+ /* Start the DMA transfer */
+ bcm2835_dma_start(c->dma_chan_base, d->control_block_base_phys);
+}
+
+static void bcm2835_dma_start_desc(struct bcm2835_chan *c)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&c->vc);
+ struct bcm2835_desc *d;
+
+ if (!vd) {
+ c->desc = NULL;
+ return;
+ }
+
+ list_del(&vd->node);
+
+ c->desc = d = to_bcm2835_dma_desc(&vd->tx);
+ c->sgidx = 0;
+
+ bcm2835_dma_start_sg(c, d, 0);
+}
+
+static irqreturn_t bcm2835_dma_callback(int irq, void *data)
+{
+ struct bcm2835_chan *c = data;
+ struct bcm2835_desc *d;
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->vc.lock, flags);
+
+ /* acknowledge interrupt */
+ writel(BCM2835_DMA_INT, c->dma_chan_base + BCM2835_DMA_CS);
+
+ d = c->desc;
+
+ if (d) {
+ if (!c->cyclic) {
+ if (++c->sgidx < d->sglen) {
+ bcm2835_dma_start_sg(c, d, c->sgidx);
+ } else {
+ bcm2835_dma_start_desc(c);
+ vchan_cookie_complete(&d->vd);
+ }
+ } else {
+ vchan_cyclic_callback(&d->vd);
+ }
+ }
+
+ /* keep the DMA engine running */
+ dsb(); /* ARM synchronization barrier */
+ writel(BCM2835_DMA_ACTIVE, c->dma_chan_base + BCM2835_DMA_CS);
+
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * This callback schedules all pending channels. We could be more
+ * clever here by postponing allocation of the real DMA channels to
+ * this point, and freeing them when our virtual channel becomes idle.
+ *
+ * We would then need to deal with 'all channels in-use'
+ */
+static void bcm2835_dma_sched(unsigned long data)
+{
+ struct bcm2835_dmadev *d = (struct bcm2835_dmadev *)data;
+ LIST_HEAD(head);
+
+ spin_lock_irq(&d->lock);
+ list_splice_tail_init(&d->pending, &head);
+ spin_unlock_irq(&d->lock);
+
+ while (!list_empty(&head)) {
+ struct bcm2835_chan *c = list_first_entry(&head,
+ struct bcm2835_chan, node);
+
+ spin_lock_irq(&c->vc.lock);
+ list_del_init(&c->node);
+ bcm2835_dma_start_desc(c);
+ spin_unlock_irq(&c->vc.lock);
+ }
+}
+
+static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ int ret;
+ struct bcm2835_dmadev *d = to_bcm2835_dma_dev(chan->device);
+ uint32_t chans = d->chans_available;
+ int chanID = 0;
+
+ dev_dbg(c->vc.chan.device->dev,
+ "allocating channel for %u\n", c->dma_sig);
+
+ /* do not use the FIQ and BULK channels */
+ chans &= ~0xD;
+
+ if (chans) {
+ /* return the ordinal of the first channel in the bitmap */
+ while (chans != 0 && (chans & 1) == 0) {
+ chans >>= 1;
+ chanID++;
+ }
+
+ /* claim the channel */
+ d->chans_available &= ~(1 << chanID);
+
+ c->dma_chan_base = BCM2835_DMA_CHANIO(d->dma_base, chanID);
+
+ c->dma_irq_number = d->dma_irq_numbers[chanID];
+
+ c->dma_ch = chanID;
+ } else {
+ return -ENOMEM;
+ }
+
+ c->dma_irq_handler.name = "DMA engine IRQ handler";
+ c->dma_irq_handler.flags = 0;
+ c->dma_irq_handler.handler = bcm2835_dma_callback;
+
+ ret = request_any_context_irq(c->dma_irq_number,
+ bcm2835_dma_callback, 0, "DMA IRQ", c);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void bcm2835_dma_free_chan_resources(struct dma_chan *chan)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ struct bcm2835_dmadev *d = to_bcm2835_dma_dev(chan->device);
+
+ vchan_free_chan_resources(&c->vc);
+ d->chans_available |= (1 << c->dma_ch);
+ free_irq(c->dma_irq_number, c);
+
+ dev_dbg(c->vc.chan.device->dev, "freeing channel for %u\n", c->dma_sig);
+}
+
+static size_t bcm2835_dma_sg_size(struct bcm2835_sg *sg)
+{
+ return sg->en * sg->fn;
+}
+
+static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d)
+{
+ unsigned i;
+ size_t size;
+
+ for (size = i = 0; i < d->sglen; i++)
+ size += bcm2835_dma_sg_size(&d->sg[i]);
+
+ return size * es_bytes[d->es];
+}
+
+static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t
addr)
+{
+ unsigned i;
+ size_t size;
+
+ for (size = i = 0; i < d->sglen; i++) {
+ size_t this_size = bcm2835_dma_sg_size(&d->sg[i]);
+
+ if (size)
+ size += this_size;
+ else if (addr >= d->sg[i].addr &&
+ addr < d->sg[i].addr + this_size)
+ size += d->sg[i].addr + this_size - addr;
+ }
+ return size;
+}
+
+
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler.
+ */
+static dma_addr_t bcm2835_get_dma_src_pos(struct bcm2835_chan *c)
+{
+ return readl(c->dma_chan_base + BCM2835_DMA_SOURCE_AD);
+}
+
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler.
+ */
+static dma_addr_t bcm2835_get_dma_dst_pos(struct bcm2835_chan *c)
+{
+ return readl(c->dma_chan_base + BCM2835_DMA_DEST_AD);
+}
+
+static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_SUCCESS || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&c->vc.lock, flags);
+ vd = vchan_find_desc(&c->vc, cookie);
+ if (vd) {
+ txstate->residue =
+ bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx));
+ } else if (c->desc && c->desc->vd.tx.cookie == cookie) {
+ struct bcm2835_desc *d = c->desc;
+ dma_addr_t pos;
+
+ if (d->dir == DMA_MEM_TO_DEV)
+ pos = bcm2835_get_dma_src_pos(c);
+ else if (d->dir == DMA_DEV_TO_MEM)
+ pos = bcm2835_get_dma_dst_pos(c);
+ else
+ pos = 0;
+
+ txstate->residue = bcm2835_dma_desc_size_pos(d, pos);
+ } else {
+ txstate->residue = 0;
+ }
+
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+
+ return ret;
+}
+
+static void bcm2835_dma_issue_pending(struct dma_chan *chan)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->vc.lock, flags);
+ if (vchan_issue_pending(&c->vc) && !c->desc) {
+ struct bcm2835_dmadev *d = to_bcm2835_dma_dev(chan->device);
+ spin_lock(&d->lock);
+ if (list_empty(&c->node))
+ list_add_tail(&c->node, &d->pending);
+ spin_unlock(&d->lock);
+ tasklet_schedule(&d->task);
+ }
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+}
+
+
+static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
+ struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+ size_t period_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ enum dma_slave_buswidth dev_width;
+ struct bcm2835_desc *d;
+ dma_addr_t dev_addr;
+ unsigned int es, sync_type, sync_dreq;
+
+ /* Grab configuration */
+ if (direction == DMA_DEV_TO_MEM) {
+ dev_addr = c->cfg.src_addr;
+ dev_width = c->cfg.src_addr_width;
+ sync_type = BCM2835_DMA_S_DREQ;
+ sync_dreq = c->cfg.slave_id;
+ } else if (direction == DMA_MEM_TO_DEV) {
+ dev_addr = c->cfg.dst_addr;
+ dev_width = c->cfg.dst_addr_width;
+ sync_type = BCM2835_DMA_D_DREQ;
+ sync_dreq = c->cfg.slave_id;
+ } else {
+ dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
+ return NULL;
+ }
+
+ /* Bus width translates to the element size (ES) */
+ switch (dev_width) {
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ es = BCM2835_DMA_DATA_TYPE_S32;
+ break;
+ default:
+ return NULL;
+ }
+
+ /* Now allocate and setup the descriptor. */
+ d = kzalloc(sizeof(*d) + sizeof(d->sg[0]), GFP_ATOMIC);
+ if (!d)
+ return NULL;
+
+ d->dir = direction;
+ d->dev_addr = dev_addr;
+ d->es = es;
+ d->sync_type = sync_type;
+ d->sync_dreq = sync_dreq;
+ d->sg[0].addr = buf_addr;
+ d->sg[0].en = period_len;
+ d->sg[0].fn = buf_len / period_len;
+ d->sglen = 1;
+
+ /* Allocate memory for control blocks */
+ d->control_block_size = d->sg[0].fn*sizeof(struct bcm2835_dma_cb);
+ d->control_block_base = dma_alloc_coherent(chan->device->dev,
+ d->control_block_size, &d->control_block_base_phys,
+ GFP_KERNEL);
+
+ if (!d->control_block_base) {
+ dev_err(chan->device->dev,
+ "%s: Memory allocation error\n", __func__);
+ return NULL;
+ }
+
+ memset(d->control_block_base, 0, d->control_block_size);
+
+ if (!c->cyclic) {
+ c->cyclic = true;
+ /* nothing else is implemented */
+ }
+
+ return vchan_tx_prep(&c->vc, &d->vd, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+}
+
+static int bcm2835_dma_slave_config(struct bcm2835_chan *c,
+ struct dma_slave_config *cfg)
+{
+ if ((cfg->direction == DMA_DEV_TO_MEM
+ && cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
+ (cfg->direction == DMA_MEM_TO_DEV
+ && cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)) {
+ return -EINVAL;
+ }
+
+ memcpy(&c->cfg, cfg, sizeof(c->cfg));
+
+ return 0;
+}
+
+static int bcm2835_dma_terminate_all(struct bcm2835_chan *c)
+{
+ struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&c->vc.lock, flags);
+
+ /* Prevent this channel being scheduled */
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
+
+ /*
+ * Stop DMA activity: we assume the callback will not be called
+ * after bcm_dma_abort() returns (even if it does, it will see
+ * c->desc is NULL and exit.)
+ */
+ if (c->desc) {
+ c->desc = NULL;
+ bcm2835_dma_abort(c->dma_chan_base);
+
+ /* Wait for stopping */
+ while (readl(c->dma_chan_base + BCM2835_DMA_CS)
+ & BCM2835_DMA_ACTIVE)
+ ;
+ }
+
+ vchan_get_all_descriptors(&c->vc, &head);
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+ vchan_dma_desc_free_list(&c->vc, &head);
+
+ return 0;
+}
+
+static int bcm2835_dma_pause(struct bcm2835_chan *c)
+{
+ /* FIXME: not supported by platform private API */
+ return -EINVAL;
+}
+
+static int bcm2835_dma_resume(struct bcm2835_chan *c)
+{
+ /* FIXME: not supported by platform private API */
+ return -EINVAL;
+}
+
+static int bcm2835_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ int ret;
+
+ switch (cmd) {
+ case DMA_SLAVE_CONFIG:
+ ret = bcm2835_dma_slave_config(c,
+ (struct dma_slave_config *)arg);
+ break;
+
+ case DMA_TERMINATE_ALL:
+ ret = bcm2835_dma_terminate_all(c);
+ break;
+
+ case DMA_PAUSE:
+ ret = bcm2835_dma_pause(c);
+ break;
+
+ case DMA_RESUME:
+ ret = bcm2835_dma_resume(c);
+ break;
+
+ default:
+ ret = -ENXIO;
+ break;
+ }
+
+ return ret;
+}
+
+static int bcm2835_dma_chan_init(struct bcm2835_dmadev *od, int dma_sig)
+{
+ struct bcm2835_chan *c;
+
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return -ENOMEM;
+
+ c->dma_sig = dma_sig;
+ c->vc.desc_free = bcm2835_dma_desc_free;
+ vchan_init(&c->vc, &od->ddev);
+ INIT_LIST_HEAD(&c->node);
+
+ od->ddev.chancnt++;
+
+ return 0;
+}
+
+static void bcm2835_dma_free(struct bcm2835_dmadev *od)
+{
+ tasklet_kill(&od->task);
+ while (!list_empty(&od->ddev.channels)) {
+ struct bcm2835_chan *c = list_first_entry(&od->ddev.channels,
+ struct bcm2835_chan, vc.chan.device_node);
+
+ list_del(&c->vc.chan.device_node);
+ tasklet_kill(&c->vc.task);
+ kfree(c);
+ }
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id bcm2835_dma_of_match[] = {
+ {
+ .compatible = "brcm,bcm2835-dma",
+ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
+#endif
+
+static int bcm2835_dma_probe(struct platform_device *pdev)
+{
+ struct bcm2835_dmadev *od;
+ struct resource *dma_res = NULL;
+ void __iomem *dma_base = NULL;
+ int rc = 0;
+ int i;
+ struct resource *irq;
+ int irq_resources;
+
+ od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
+ if (!od)
+ return -ENOMEM;
+
+ dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dma_base = devm_ioremap_resource(&pdev->dev, dma_res);
+ if (IS_ERR(dma_base))
+ return PTR_ERR(dma_base);
+
+ od->dma_base = dma_base;
+ od->chans_available = BCM2835_DMA_CHANNEL_MASK;
+
+ dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
+ dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
+ od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources;
+ od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
+ od->ddev.device_tx_status = bcm2835_dma_tx_status;
+ od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
+ od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
+ od->ddev.device_control = bcm2835_dma_control;
+ od->ddev.dev = &pdev->dev;
+ INIT_LIST_HEAD(&od->ddev.channels);
+ INIT_LIST_HEAD(&od->pending);
+ spin_lock_init(&od->lock);
+
+ tasklet_init(&od->task, bcm2835_dma_sched, (unsigned long)od);
+
+ irq_resources = 0;
+
+ for (i = 0; i < pdev->num_resources; i++) {
+ if (IORESOURCE_IRQ == resource_type(&pdev->resource[i]))
+ irq_resources++;
+ }
+
+ od->dma_irq_numbers = devm_kzalloc(&pdev->dev,
+ irq_resources*sizeof(int), GFP_KERNEL);
+ if (!od)
+ return -ENOMEM;
+
+ for (i = 0; i < irq_resources; i++) {
+ rc = bcm2835_dma_chan_init(od, i);
+ if (rc) {
+ bcm2835_dma_free(od);
+ return rc;
+ }
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ if (!irq) {
+ dev_err(&pdev->dev,
+ "No IRQ resource for channel %i\n", i);
+ return -ENODEV;
+ }
+ od->dma_irq_numbers[i] = irq->start;
+ }
+
+ rc = dma_async_device_register(&od->ddev);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "Failed to register slave DMA engine device: %d\n", rc);
+ bcm2835_dma_free(od);
+ return rc;
+ }
+
+ platform_set_drvdata(pdev, od);
+
+ if (pdev->dev.of_node) {
+ bcm2835_dma_info.dma_cap = od->ddev.cap_mask;
+
+ /* Device-tree DMA controller registration */
+ rc = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_simple_xlate, &bcm2835_dma_info);
+ if (rc) {
+ dev_err(&pdev->dev, "Failed to register DMA
controller\n");
+ dma_async_device_unregister(&od->ddev);
+ bcm2835_dma_free(od);
+ return rc;
+ }
+ }
+
+ dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n");
+
+ return rc;
+}
+
+static int bcm2835_dma_remove(struct platform_device *pdev)
+{
+ struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
+
+ dma_async_device_unregister(&od->ddev);
+ bcm2835_dma_free(od);
+
+ return 0;
+}
+
+static struct platform_driver bcm2835_dma_driver = {
+ .probe = bcm2835_dma_probe,
+ .remove = bcm2835_dma_remove,
+ .driver = {
+ .name = "bcm2835-dma",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(bcm2835_dma_of_match),
+ },
+};
+
+static const struct platform_device_info bcm2835_dma_dev_info = {
+ .name = "bcm2835-dma",
+ .id = -1,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
+static int bcm2835_dma_init(void)
+{
+ int rc = platform_driver_register(&bcm2835_dma_driver);
+ return rc;
+}
+subsys_initcall(bcm2835_dma_init);
+
+static void __exit bcm2835_dma_exit(void)
+{
+ platform_driver_unregister(&bcm2835_dma_driver);
+}
+module_exit(bcm2835_dma_exit);
+
+MODULE_AUTHOR("Florian Meier");
+MODULE_DESCRIPTION("BCM2835 DMA engine driver");
+MODULE_LICENSE("GPL");
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
