On 11:55 Wed 23 Oct     , Johan Hovold wrote:
> Add helper function to control the gpio_on signal.
> 
> Acked-by: Jingoo Han <jg1....@samsung.com>
> Signed-off-by: Johan Hovold <jhov...@gmail.com>

ok
> ---
>  drivers/video/backlight/atmel-pwm-bl.c | 23 +++++++++++------------
>  1 file changed, 11 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/video/backlight/atmel-pwm-bl.c 
> b/drivers/video/backlight/atmel-pwm-bl.c
> index ffc30d2..1277e0c 100644
> --- a/drivers/video/backlight/atmel-pwm-bl.c
> +++ b/drivers/video/backlight/atmel-pwm-bl.c
> @@ -26,6 +26,14 @@ struct atmel_pwm_bl {
>       int                                     gpio_on;
>  };
>  
> +static void atmel_pwm_bl_set_gpio_on(struct atmel_pwm_bl *pwmbl, int on)
> +{
> +     if (!gpio_is_valid(pwmbl->gpio_on))
> +             return;
> +
> +     gpio_set_value(pwmbl->gpio_on, on ^ pwmbl->pdata->on_active_low);
> +}
> +
>  static int atmel_pwm_bl_set_intensity(struct backlight_device *bd)
>  {
>       struct atmel_pwm_bl *pwmbl = bl_get_data(bd);
> @@ -48,19 +56,13 @@ static int atmel_pwm_bl_set_intensity(struct 
> backlight_device *bd)
>               pwm_duty = pwmbl->pdata->pwm_duty_min;
>  
>       if (!intensity) {
> -             if (gpio_is_valid(pwmbl->gpio_on)) {
> -                     gpio_set_value(pwmbl->gpio_on,
> -                                     0 ^ pwmbl->pdata->on_active_low);
> -             }
> +             atmel_pwm_bl_set_gpio_on(pwmbl, 0);
>               pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty);
>               pwm_channel_disable(&pwmbl->pwmc);
>       } else {
>               pwm_channel_enable(&pwmbl->pwmc);
>               pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty);
> -             if (gpio_is_valid(pwmbl->gpio_on)) {
> -                     gpio_set_value(pwmbl->gpio_on,
> -                                     1 ^ pwmbl->pdata->on_active_low);
> -             }
> +             atmel_pwm_bl_set_gpio_on(pwmbl, 1);
>       }
>  
>       return 0;
> @@ -196,10 +198,7 @@ static int atmel_pwm_bl_remove(struct platform_device 
> *pdev)
>  {
>       struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev);
>  
> -     if (gpio_is_valid(pwmbl->gpio_on)) {
> -             gpio_set_value(pwmbl->gpio_on,
> -                                     0 ^ pwmbl->pdata->on_active_low);
> -     }
> +     atmel_pwm_bl_set_gpio_on(pwmbl, 0);
>       pwm_channel_disable(&pwmbl->pwmc);
>       pwm_channel_free(&pwmbl->pwmc);
>  
> -- 
> 1.8.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to