On 10:43 Thu 10 Oct     , Nicolas Ferre wrote:
> On older SoC, the "name" field is not filled in the register map.
> Fix the way to figure out if the serial port is an uart or an usart for these
> older products (with corresponding properties).
> 
> Signed-off-by: Nicolas Ferre <nicolas.fe...@atmel.com>
> ---
>  drivers/tty/serial/atmel_serial.c | 19 ++++++++++++++++++-
>  include/linux/atmel_serial.h      |  1 +
>  2 files changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c 
> b/drivers/tty/serial/atmel_serial.c
> index 6b0f75e..c7d99af 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -99,6 +99,7 @@ static void atmel_stop_rx(struct uart_port *port);
>  #define UART_PUT_RTOR(port,v)        __raw_writel(v, (port)->membase + 
> ATMEL_US_RTOR)
>  #define UART_PUT_TTGR(port, v)       __raw_writel(v, (port)->membase + 
> ATMEL_US_TTGR)
>  #define UART_GET_IP_NAME(port)       __raw_readl((port)->membase + 
> ATMEL_US_NAME)
> +#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + 
> ATMEL_US_VERSION)
>  
>   /* PDC registers */
>  #define UART_PUT_PTCR(port,v)        __raw_writel(v, (port)->membase + 
> ATMEL_PDC_PTCR)
> @@ -1503,6 +1504,7 @@ static void atmel_get_ip_name(struct uart_port *port)
>  {
>       struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
>       int name = UART_GET_IP_NAME(port);
> +     u32 version;
>       int usart, uart;
>       /* usart and uart ascii */
>       usart = 0x55534152;
> @@ -1517,7 +1519,22 @@ static void atmel_get_ip_name(struct uart_port *port)
>               dev_dbg(port->dev, "This is uart\n");
>               atmel_port->is_usart = false;
>       } else {
> -             dev_err(port->dev, "Not supported ip name, set to uart\n");
> +             /* fallback for older SoCs: use version field */
> +             version = UART_GET_IP_VERSION(port);
> +             switch (version) {
> +             case 0x302:
> +             case 0x10213:
> +                     dev_dbg(port->dev, "This version is usart\n");
> +                     atmel_port->is_usart = true;
> +                     break;
> +             case 0x203:
> +             case 0x10202:
> +                     dev_dbg(port->dev, "This version is uart\n");
> +                     atmel_port->is_usart = false;
> +                     break;
> +             default:
> +                     dev_err(port->dev, "Not supported ip name nor version, 
> set to uart\n");

it's not really an error a dev_warn is more oppropriate
> +             }
>       }
>  }
>  
> diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
> index be201ca..00beddf 100644
> --- a/include/linux/atmel_serial.h
> +++ b/include/linux/atmel_serial.h
> @@ -125,5 +125,6 @@
>  #define ATMEL_US_IF          0x4c                    /* IrDA Filter Register 
> */
>  
>  #define ATMEL_US_NAME                0xf0                    /* Ip Name */
> +#define ATMEL_US_VERSION     0xfc                    /* Ip Version */
>  
>  #endif
> -- 
> 1.8.2.2
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to