On 10/11/2013 11:49 AM, Roger Quadros wrote: > On 10/10/2013 07:00 PM, Tony Lindgren wrote: >> * Roger Quadros <rog...@ti.com> [131010 06:32]: >>> >>> I tried testing this with the USB EHCI driver, but I'm not getting wake up >>> interrupts >>> while the system is still running and only the EHCI controller is runtime >>> suspended. >>> >>> It seems we need to somehow call _reconfigure_io_chain() to update the >>> daisy chain >>> whenever the pad wakeup_enable bit is changed. >> >> Sounds like this is on omap3? Have you tried calling pcs_soc->rearm() in the >> pcs_irq_handle() like the comments there suggest? At least for me that keeps >> the wake-up interrupts continuously running on omap3 instead of just idle >> modes. > > Yes it is on OMAP3. I haven't tried with pcs_soc->rearm(). I will give it a > try and > let you know. >> >> Now on omap4, I've noticed the wake up interrupts are on all the time based >> on tests >> with the serial driver. >> >>> I think pcs_irq_set_wake() is where need to control system wakeup behaviour >>> for the irq. >>> This is where we should be able to change WAKEUP_EN bit of the pad >>> to enable/disable system wakeup for that pad and also call >>> _reconfigure_io_chain(). >> >> Well the irq_set_wake() should only be needed for suspend and resume. For >> runtime PM >> the wake-events should be always enabled by default as pointed out by Alan >> Stern >> a while back. > > Right, but we need to update the WAKEUP_EN bit in the pad control register > for that > to work, no?. This is something we are not doing in the driver.
OK sorry, just figured out that we are doing it indeed in pcs_irq_set(). Wasn't able to test it yet with USB. But I don't see any issues except that pcs_soc->rearm() needs to be called from pcs_irq_set() instead of from pcs_irq_unmask(). After that you can add my Reviewed-by: Roger Quadros <rog...@ti.com> cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
