This patch does the following 1. use wait_for_completion_timeout instead of wait_for_completion_interruptible_timeout 2. Reset software if a timeout happens. 3. Also reduce the timeout to 100milli secs
Note: submitted for review at https://patchwork.kernel.org/patch/2279591/ Signed-off-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com> Cc: Doug Anderson <diand...@chromium.org> Cc: Lars-Peter Clausen <l...@metafoo.de> --- Changes since v1: As per discussion at http://marc.info/?l=linux-kernel&m=136517637228869&w=3 This patch does the following 1. use wait_for_completion_timeout instead of wait_for_completion_interruptible_timeout 2. Reset software if a timeout happens. 3. Also reduce the timeout to 100milli secs Changes since v2: None. Rebased and reposting. --- drivers/iio/adc/exynos_adc.c | 66 +++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 30 deletions(-) diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index d25b262..f18ed7e 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -82,7 +82,7 @@ enum adc_version { #define ADC_CON_EN_START (1u << 0) #define ADC_DATX_MASK 0xFFF -#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) struct exynos_adc { void __iomem *regs; @@ -112,6 +112,30 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) return (unsigned int)match->data; } +static void exynos_adc_hw_init(struct exynos_adc *info) +{ + u32 con1, con2; + + if (info->version == ADC_V2) { + con1 = ADC_V2_CON1_SOFT_RESET; + writel(con1, ADC_V2_CON1(info->regs)); + + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); + writel(con2, ADC_V2_CON2(info->regs)); + + /* Enable interrupts */ + writel(1, ADC_V2_INT_EN(info->regs)); + } else { + /* set default prescaler values and Enable prescaler */ + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; + + /* Enable 12-bit ADC resolution */ + con1 |= ADC_V1_CON_RES; + writel(con1, ADC_V1_CON(info->regs)); + } +} + static int exynos_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -121,6 +145,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev, struct exynos_adc *info = iio_priv(indio_dev); unsigned long timeout; u32 con1, con2; + int ret; if (mask != IIO_CHAN_INFO_RAW) return -EINVAL; @@ -145,16 +170,21 @@ static int exynos_read_raw(struct iio_dev *indio_dev, ADC_V1_CON(info->regs)); } - timeout = wait_for_completion_interruptible_timeout + timeout = wait_for_completion_timeout (&info->completion, EXYNOS_ADC_TIMEOUT); + if (timeout == 0) { + dev_warn(&indio_dev->dev, "Conversion timed out reseting\n"); + exynos_adc_hw_init(info); + ret = -ETIMEDOUT; + } else { + *val = info->value; + ret = IIO_VAL_INT; + } *val = info->value; mutex_unlock(&indio_dev->mlock); - if (timeout == 0) - return -ETIMEDOUT; - - return IIO_VAL_INT; + return ret; } static irqreturn_t exynos_adc_isr(int irq, void *dev_id) @@ -226,30 +256,6 @@ static int exynos_adc_remove_devices(struct device *dev, void *c) return 0; } -static void exynos_adc_hw_init(struct exynos_adc *info) -{ - u32 con1, con2; - - if (info->version == ADC_V2) { - con1 = ADC_V2_CON1_SOFT_RESET; - writel(con1, ADC_V2_CON1(info->regs)); - - con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | - ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); - writel(con2, ADC_V2_CON2(info->regs)); - - /* Enable interrupts */ - writel(1, ADC_V2_INT_EN(info->regs)); - } else { - /* set default prescaler values and Enable prescaler */ - con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; - - /* Enable 12-bit ADC resolution */ - con1 |= ADC_V1_CON_RES; - writel(con1, ADC_V1_CON(info->regs)); - } -} - static int exynos_adc_probe(struct platform_device *pdev) { struct exynos_adc *info = NULL; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
