Hi Ivan,
Minor comments below.
On 10/07/2013 10:44 AM, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <iiva...@mm-sol.com>
>
> DWC3 glue layer is hardware layer around Synopsys DesignWare
> USB3 core. Its purpose is to supply Synopsys IP with required
> clocks, voltages and interface it with the rest of the SoC.
>
> Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
> ---
> drivers/usb/dwc3/Kconfig | 8 +++
> drivers/usb/dwc3/Makefile | 1 +
> drivers/usb/dwc3/dwc3-msm.c | 168
> +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 177 insertions(+)
> create mode 100644 drivers/usb/dwc3/dwc3-msm.c
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 70fc430..4c7b5a4 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -59,6 +59,14 @@ config USB_DWC3_EXYNOS
> Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
> say 'Y' or 'M' if you have one such device.
>
> +config USB_DWC3_MSM
> + tristate "Qualcomm MSM/APQ Platforms"
> + default USB_DWC3
> + select USB_MSM_DWC3_PHYS
> + help
> + Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
> + say 'Y' or 'M' if you have one such device.
> +
> config USB_DWC3_PCI
> tristate "PCIe-based Platforms"
> depends on PCI
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> index dd17601..a90de66 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -31,4 +31,5 @@ endif
>
> obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
> obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
> +obj-$(CONFIG_USB_DWC3_MSM) += dwc3-msm.o
> obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
> diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
> new file mode 100644
> index 0000000..1d73f92
> --- /dev/null
> +++ b/drivers/usb/dwc3/dwc3-msm.c
> @@ -0,0 +1,168 @@
> +/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/usb/phy.h>
> +
> +struct dwc3_msm {
> + struct device *dev;
> +
> + struct clk *core_clk;
> + struct clk *iface_clk;
> + struct clk *sleep_clk;
> + struct clk *utmi_clk;
> +
> + struct regulator *gdsc;
> +};
> +
> +static int dwc3_msm_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct dwc3_msm *mdwc;
> + struct resource *res;
> + void __iomem *tcsr;
> + int ret = 0;
> +
> + mdwc = devm_kzalloc(&pdev->dev, sizeof(*mdwc), GFP_KERNEL);
> + if (!mdwc)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, mdwc);
> +
> + mdwc->dev = &pdev->dev;
> +
> + mdwc->gdsc = devm_regulator_get(mdwc->dev, "gdsc");
> +
> + mdwc->core_clk = devm_clk_get(mdwc->dev, "core");
> + if (IS_ERR(mdwc->core_clk)) {
> + dev_dbg(mdwc->dev, "failed to get core clock\n");
> + return PTR_ERR(mdwc->core_clk);
> + }
> +
> + mdwc->iface_clk = devm_clk_get(mdwc->dev, "iface");
> + if (IS_ERR(mdwc->iface_clk)) {
> + dev_dbg(mdwc->dev, "failed to get iface clock\n");
> + return PTR_ERR(mdwc->iface_clk);
> + }
> +
> + mdwc->sleep_clk = devm_clk_get(mdwc->dev, "sleep");
> + if (IS_ERR(mdwc->sleep_clk)) {
> + dev_dbg(mdwc->dev, "failed to get sleep clock\n");
> + return PTR_ERR(mdwc->sleep_clk);
> + }
> +
> + mdwc->utmi_clk = devm_clk_get(mdwc->dev, "utmi");
> + if (IS_ERR(mdwc->utmi_clk)) {
> + dev_dbg(mdwc->dev, "failed to get utmi clock\n");
> + return PTR_ERR(mdwc->utmi_clk);
> + }
I'm not sure that those dev_dbg() are useful at all.
> +
> + if (!IS_ERR(mdwc->gdsc)) {
> + ret = regulator_enable(mdwc->gdsc);
> + if (ret)
> + dev_err(mdwc->dev, "cannot enable gdsc\n");
> + }
> +
> + /*
> + * DWC3 Core requires its CORE CLK (aka master / bus clk) to
> + * run at 125Mhz in SSUSB mode and >60MHZ for HSUSB mode.
> + */
> + clk_set_rate(mdwc->core_clk, 125000000);
> + clk_prepare_enable(mdwc->core_clk);
> + clk_prepare_enable(mdwc->iface_clk);
> + clk_prepare_enable(mdwc->sleep_clk);
> + clk_prepare_enable(mdwc->utmi_clk);
All function calls above could return errors. Aren't those clocks fatal?
regadrs,
Stan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
