This adds a driver for hardware random number generator present
on Qualcomm MSM SoC's.

Signed-off-by: Stanimir Varbanov <svarba...@mm-sol.com>
---
 drivers/char/hw_random/Kconfig   |  12 +++
 drivers/char/hw_random/Makefile  |   1 +
 drivers/char/hw_random/msm-rng.c | 211 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 224 insertions(+)
 create mode 100644 drivers/char/hw_random/msm-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 0aa9d91daef5..d902330cef43 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -314,3 +314,15 @@ config HW_RANDOM_TPM
          module will be called tpm-rng.
 
          If unsure, say Y.
+
+config HW_RANDOM_MSM
+        tristate "Qualcomm MSM Random Number Generator support"
+        depends on HW_RANDOM && ARCH_MSM && HAVE_CLK
+        ---help---
+          This driver provides kernel-side support for the Random Number
+          Generator hardware found on Qualcomm MSM SoCs.
+
+          To compile this driver as a module, choose M here. the
+          module will be called msm-rng.
+
+          If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index bed467c9300e..441a0a7705a2 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
 obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-rng.o
 obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
 obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
+obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
diff --git a/drivers/char/hw_random/msm-rng.c b/drivers/char/hw_random/msm-rng.c
new file mode 100644
index 000000000000..c4545d2da949
--- /dev/null
+++ b/drivers/char/hw_random/msm-rng.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+/* Device specific register offsets */
+#define PRNG_DATA_OUT          0x0000
+#define PRNG_STATUS            0x0004
+#define PRNG_LFSR_CFG          0x0100
+#define PRNG_CONFIG            0x0104
+
+/* Device specific register masks and config values */
+#define PRNG_LFSR_CFG_MASK     0x0000ffff
+#define PRNG_LFSR_CFG_CLOCKS   0x0000dddd
+#define PRNG_CONFIG_MASK       0x00000002
+#define PRNG_CONFIG_HW_ENABLE  BIT(1)
+#define PRNG_STATUS_DATA_AVAIL BIT(0)
+
+#define MAX_HW_FIFO_DEPTH      16
+#define MAX_HW_FIFO_SIZE       (MAX_HW_FIFO_DEPTH * 4)
+#define WORD_SZ                        4
+
+struct msm_rng {
+       void __iomem *base;
+       struct clk *clk;
+};
+
+static int msm_rng_enable(struct msm_rng *rng, int enable)
+{
+       u32 val;
+       int ret;
+
+       ret = clk_prepare_enable(rng->clk);
+       if (ret)
+               return ret;
+
+       if (enable) {
+               /* Enable PRNG only if it is not already enabled */
+               val = readl_relaxed(rng->base + PRNG_CONFIG);
+               if (val & PRNG_CONFIG_HW_ENABLE)
+                       goto already_enabled;
+
+               /* PRNG is not enabled */
+               val = readl_relaxed(rng->base + PRNG_LFSR_CFG);
+               val &= ~PRNG_LFSR_CFG_MASK;
+               val |= PRNG_LFSR_CFG_CLOCKS;
+               writel(val, rng->base + PRNG_LFSR_CFG);
+
+               val = readl_relaxed(rng->base + PRNG_CONFIG);
+               val &= ~PRNG_CONFIG_MASK;
+               val |= PRNG_CONFIG_HW_ENABLE;
+               writel(val, rng->base + PRNG_CONFIG);
+       } else {
+               val = readl_relaxed(rng->base + PRNG_CONFIG);
+               val &= ~PRNG_CONFIG_MASK;
+               writel(val, rng->base + PRNG_CONFIG);
+       }
+
+already_enabled:
+       clk_disable_unprepare(rng->clk);
+       return 0;
+}
+
+static int msm_rng_read(struct hwrng *hwrng, void *data, size_t max, bool wait)
+{
+       struct msm_rng *rng = (struct msm_rng *)hwrng->priv;
+       size_t currsize = 0;
+       u32 *retdata = data;
+       size_t maxsize;
+       int ret;
+       u32 val;
+
+       /* calculate max size bytes to transfer back to caller */
+       maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, max);
+
+       /* no room for word data */
+       if (maxsize < WORD_SZ)
+               return 0;
+
+       ret = clk_prepare_enable(rng->clk);
+       if (ret)
+               return ret;
+
+       /* read random data from hardware */
+       do {
+               val = readl_relaxed(rng->base + PRNG_STATUS);
+               if (!(val & PRNG_STATUS_DATA_AVAIL))
+                       break;
+
+               val = readl_relaxed(rng->base + PRNG_DATA_OUT);
+               if (!val)
+                       break;
+
+               *retdata++ = val;
+               currsize += WORD_SZ;
+
+               /* make sure we stay on 32bit boundary */
+               if ((maxsize - currsize) < WORD_SZ)
+                       break;
+       } while (currsize < maxsize);
+
+       clk_disable_unprepare(rng->clk);
+
+       return currsize;
+}
+
+static int msm_rng_init(struct hwrng *hwrng)
+{
+       struct msm_rng *rng = (struct msm_rng *)hwrng->priv;
+
+       return msm_rng_enable(rng, 1);
+}
+
+static void msm_rng_cleanup(struct hwrng *hwrng)
+{
+       struct msm_rng *rng = (struct msm_rng *)hwrng->priv;
+
+       msm_rng_enable(rng, 0);
+}
+
+static struct hwrng msm_rng_ops = {
+       .name = KBUILD_MODNAME,
+       .init = msm_rng_init,
+       .cleanup = msm_rng_cleanup,
+       .read = msm_rng_read,
+};
+
+static int msm_rng_probe(struct platform_device *pdev)
+{
+       struct msm_rng *rng;
+       struct device_node *np;
+       struct resource res;
+       int ret;
+
+       np = of_node_get(pdev->dev.of_node);
+       if (!np)
+               return -ENODEV;
+
+       rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+       if (!rng) {
+               ret = -ENOMEM;
+               goto err_exit;
+       }
+
+       ret = of_address_to_resource(np, 0, &res);
+       if (ret)
+               goto err_exit;
+
+       rng->base = devm_ioremap_resource(&pdev->dev, &res);
+       if (IS_ERR(rng->base)) {
+               ret = PTR_ERR(rng->base);
+               goto err_exit;
+       }
+
+       rng->clk = devm_clk_get(&pdev->dev, "prng");
+       if (IS_ERR(rng->clk)) {
+               ret = PTR_ERR(rng->clk);
+               goto err_exit;
+       }
+
+       msm_rng_ops.priv = (unsigned long) rng;
+       ret = hwrng_register(&msm_rng_ops);
+       if (ret)
+               dev_err(&pdev->dev, "failed to register hwrng\n");
+
+err_exit:
+       of_node_put(np);
+       return ret;
+}
+
+static int msm_rng_remove(struct platform_device *pdev)
+{
+       hwrng_unregister(&msm_rng_ops);
+       return 0;
+}
+
+static struct of_device_id msm_rng_of_match[] = {
+       { .compatible = "qcom,prng", },
+       {}
+};
+MODULE_DEVICE_TABLE(of, msm_rng_of_match);
+
+static struct platform_driver msm_rng_driver = {
+       .probe = msm_rng_probe,
+       .remove = msm_rng_remove,
+       .driver = {
+               .name = KBUILD_MODNAME,
+               .owner = THIS_MODULE,
+               .of_match_table = of_match_ptr(msm_rng_of_match),
+       }
+};
+module_platform_driver(msm_rng_driver);
+
+MODULE_AUTHOR("The Linux Foundation");
+MODULE_DESCRIPTION("Qualcomm MSM random number generator driver");
+MODULE_LICENSE("GPL v2");
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to