Machine constraints is configured during regulator register. If current
constraints are provided through machine constraints then it is observed
that sometime the current configured on rail is out of range what machine
constraint has.
Set the current constraints when setting machine constraints to make
sure that rail's current is within the range of given machine constraints.
Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
---
Changes from V1:
- Correct the indentng.
- Prints warning when current-ops are not implemented.
- Set constraint current unconditionally.
- Blank line before last return.
drivers/regulator/core.c | 34 ++++++++++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b698e2b..bc75cb2 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -904,6 +904,36 @@ static int machine_constraints_voltage(struct
regulator_dev *rdev,
return 0;
}
+static int machine_constraints_current(struct regulator_dev *rdev,
+ struct regulation_constraints *constraints)
+{
+ struct regulator_ops *ops = rdev->desc->ops;
+ int ret;
+
+ if (!constraints->min_uA && !constraints->max_uA)
+ return 0;
+
+ if (constraints->min_uA > constraints->max_uA) {
+ rdev_err(rdev, "Invalid current constraints\n");
+ return -EINVAL;
+ }
+
+ if (!ops->set_current_limit || !ops->get_current_limit) {
+ rdev_warn(rdev, "Operation of current configuration missing\n");
+ return 0;
+ }
+
+ /* Set regulator current in constraints range */
+ ret = ops->set_current_limit(rdev, constraints->min_uA,
+ constraints->max_uA);
+ if (ret < 0) {
+ rdev_err(rdev, "Failed to set current constraint, %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
/**
* set_machine_constraints - sets regulator constraints
* @rdev: regulator source
@@ -934,6 +964,10 @@ static int set_machine_constraints(struct regulator_dev
*rdev,
if (ret != 0)
goto out;
+ ret = machine_constraints_current(rdev, rdev->constraints);
+ if (ret != 0)
+ goto out;
+
/* do we need to setup our suspend state */
if (rdev->constraints->initial_state) {
ret = suspend_prepare(rdev, rdev->constraints->initial_state);
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
