Hi Linus
On Tue, 17 Sep 2013, Linus Walleij wrote:
> On Mon, Sep 9, 2013 at 6:03 PM, Guennadi Liakhovetski
> <g.liakhovet...@gmx.de> wrote:
>
> > There are four I2C interfaces on r8a7790, each of them can be connected to
> > one of the two respective I2C controllers, e.g. interface #0 can be
> > configured to work with I2C0 or with IIC0. Additionally some of those
> > interfaces can also use one of several pin sets. Interface #3 is special,
> > because it can be used in automatic mode for DVFS. It only has one set
> > of pins available and those pins cannot be used for anything else, they
> > also lack the GPIO function.
> >
> > This patch uses the sh-pfc ability to configure pins, not associated with
> > GPIOs and adds support for I2C3 to the r8a7790 PFC set up.
> >
> > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+rene...@gmail.com>
>
> Pls CC Laurent who is main reviewer on all sh-pfc stuff.
Sure, sorry, thanks for adding him.
> > +/* R8A7790 has 6 banks with 32 GPIOs in each = 192 GPIOs */
> > +#define ROW_GROUP_A(r) ('Z' - 'A' + 1 + (r))
> > +#define PIN_NUMBER(r, c) (((r) - 'A') * 16 + (c) + 200)
> > +#define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
>
> You add these #defines but do not use them.
ehm, actually I do:
+/* - I2C3 -------------------------------------------------------------------
*/
+static const unsigned int i2c3_pins[] = {
+ /* SCL, SDA */
+ PIN_A_NUMBER('J', 15), PIN_A_NUMBER('H', 15),
+};
Besides, the PIN_NUMBER() macro is used in sh_pfc.h in the definition of
SH_PFC_PIN_NAMED(), and that macro is also used in this patch:
+ /* Pins not associated with a GPIO port */
+ SH_PFC_PIN_NAMED(ROW_GROUP_A('J'), 15, AJ15),
+ SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
> Yours,
> Linus Walleij
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
